Ruckus Wireless MediaFlex 7811 Bedienungsanleitung

QUICKSETUPGUIDE

Ruckus Wireless

MediaFlex 7811

Access Point

This Quick Setup Guide describes in step-by-step detail how to

set up a Ruckus Wireless MediaFlex 7811Access Point (AP), pro-

viding users with a wireless LAN. The process includes reconfigur-

ing your computer to connect to the AP through the Ruckus

Wireless Web Admin Interface. At the conclusion of setup, you

can connect your Ruckus Wireless AP at your site and put it in

use.

Package Contents

• One MediaFlex 7811 Access Point

• One 1-meter/3-foot Cat5 Ethernet cable

• One AC power adapter

• One Quick Setup Guide (this publication)

Required Equipment

• A computer running Windows 2000/Windows XP or Mac OS

• A modem (DSL or cable), E1/T1 router, or other device pro-

vided by your Internet Service Provider, that brings Inter-

net access to your site

1After unpacking your Ruckus Wireless AP from the package,

place it next to your computer.

2Temporarily disconnect your computer from any local net-

work (if connected).

3Using the Ethernet cable provided in the Ruckus package,

connect the network port on your computer to the single

Ethernet port (labelled “WAN”) on the AP.

4Using the AC adapter included in the package, con-

nect the AP to a convenient (and protected) power

source. After a minute, verify that the AP’s Power

LED (shown right) is a steady green.

You can now prepare your PC for a direct-to-AP network

connection.

On a Windows Computer

1Open the Network Connections (or Network and Dial-up

Connections) control panel according to how the Start

menu is set up:

Start-> Settings-> Network Connections

Start-> Control Panel-> Network Connections

2When the Network Connections window appears (XP or

2000), right-click the icon for “Local Area Connection” and

choose Properties.

ALERT!—Make sure you don’t open the Properties dialog

box for the wireless network.

3When the Local Area Connection Properties dialog box

appears, select Internet Protocol (TCP/IP) from the scroll-

ing list, and click Properties.

The TCP/IP Properties dialog box appears.

IMPORTANT— Write down all of the currently active set-

tings so you can restore your computer to its current con-

figuration later (when this process is complete).

4Select Use the following IP address (if it’s not already

active) and make the following entries:

IP Address 192.168.2.22 (or any address in

the 192.168.2.x network besides

192.168.2.1)

Subnet mask 255.255.255.0

Default gateway 192.168.2.1

Preferred DNS server 192.168.2.1

You can leave the Alternate DNS server field empty.

5Click OK to save your changes and exit first the TCP/IP

Properties dialog box, then the Local Area Connection

Properties dialog box.

Your changes are put into effect immediately. You can now

use a Web browser to log into the AP.

On a Mac Computer

1Open System Preferences. The System Preferences win-

dow appears.

2Click the Network icon. The Network window appears.

3Click Built-in Ethernet, and then click the Configure but-

ton.

4In Configure IPv4, select Manually.

5Configure the IP address settings as follows:

IP Address 192.168.2.22 (or any address in

the 192.168.2.x network besides

192.168.2.1)

Subnet Mask 255.255.255.0

Router 192.168.2.1

6Click Apply Now.

You have completed preparing your computer for AP connec-

tion. Click the red (X) button on the upper-left corner to close

the Network window.

As specified earlier, the AP should be directly connected to

your computer (through the WAN port), and have been powered

up, ready for setup.

1On the PC, open a Web browser window.

2In the browser, use the IP address printed on the bottom of

the AP as a URL to connect to the AP.

1Connecting the Ruckus AP to Your

Computer

2Preparing Your Computer for AP

Connection

3Logging into the AP

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Your URL should resemble this example:

https://192.168.2.1

3Press Enter to initiate the connection. A warning message

appears, informing you that there is a problem with the

security certificate of the Web site (Ruckus Wireless AP’s

Web interface).

NOTE — There is no problem with the security certificate.

However, since the AP uses a self-signed certificate, your

browser is unable to verify its validity.

4Accept the Ruckus Wireless certificate. The option that you

need to select to accept the certificate depends on the

browser that you are using.

• In Microsoft Internet Explorer 7, click Continue to this

website (not recommended).

• In Mozilla Firefox, click either Accept this certificate

permanently or Accept this certificate temporarily for

this session, and then click OK.

5When the Ruckus Wireless Admin login page appears, enter

the Username and Password that are printed on the

sticker on the bottom of the AP.

6Click Login.

When the Ruckus 7811 Multimedia Wireless AP manage-

ment application appears in the browser, you can proceed.

[This application will be referred to as the “Web Admin

interface” hereafter.]

To restore the network settings for your computer, do one of

the following, according to which OS your computer uses:

On a Windows Computer

1On your Windows 2000 or XP computer, open the Network

Connections (or Network and Dial-up Connections) control

panel according to how the Start menu is set up:

Start-> Settings-> Network Connections

Start-> Control Panel-> Network Connections

2When the Network Connections window appears (2000 or

XP), right-click the icon for the “Local Area Connection”

designated for your home network and choose Properties.

3When the Local Area Connection Properties dialog box

appears, select Internet Protocol (TCP/IP) from the scroll-

ing list, and click Properties.

The TCP/IP Properties dialog box appears.

4Replace the recent AP-specific connection entries with the

entries from your standard network configuration.

5Click OK to save your settings and exit first the TCP/IP

Properties dialog box, then the Local Area Connection

Properties dialog box.

Your computer is now ready for normal network use.

On a Mac Computer

1Open System Preferences. The System Preferences win-

dow appears

2Click the Network icon. The Network window appears.

3Click Built-in Ethernet, and then click the Configure but-

ton.

4Replace the recent AP-specific connection entries with the

entries from your standard network configuration.

5Click Apply Now.

Your computer is now ready for normal network use.

1Disconnect the AP’s power adapter from the power outlet,

if you have not already done so.

2Move the AP to its permanent location (accessible to both

AC power and ISP connections). Follow these guidelines:

• Place the AP as close to the center of the room, and

away from any physical obstructions.

• Place the AP on a shelf or other elevated location where

the user’s wireless networking devices are in line-of

sight access.

• Avoid any sources of electromagnetic interference.

• Avoid placing the AP near large metal or glass surfaces.

3Use an Ethernet cable to connect the WAN port of the AP to

the ISP’s DSL modem, cable modem, or gateway device.

4Connect the power adapter to the AP, then to a convenient

power source.

5Verify that the Power and WAN Connectivity LEDs on the

front of the AP are lit.

After a short pause to re-establish the Internet connection,

you can test the AP.

See the separate Ruckus Wireless User Guide (downloadable

from the Ruckus support web site) for all the details, or open and

browse the Help window in the Web Admin interface for topical

assistance.

4Restoring Your Computer’s Network

Settings

5Placing the AP in Your Site

** For More Information

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Andere Handbücher für MediaFlex 7811

Inhaltsverzeichnis

Andere Ruckus Wireless Drahtloser Zugangspunkt Handbücher

Ruckus Wireless

Ruckus Wireless Xclaim Xi-2 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7352 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SmartCell Gateway 200 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7372-E Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7341 802.11n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T310n Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 2741 802.11g Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T710 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SC8800-S Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless Unleashed H320 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T710s Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T811-CM Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7321 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless Unleashed R510 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless E510 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless SC8800-S Installationsanleitung

Ruckus Wireless

Ruckus Wireless T305e Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7782-E Installationsanleitung

Ruckus Wireless

Ruckus Wireless R730 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R300 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex 7982 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R300 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless T504 Bedienungsanleitung

Ruckus Wireless

Ruckus Wireless ZoneFlex R710 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung