Ryobi AIRgrip MultiTASKit EMM0001 Bedienungsanleitung

OPERATOR’S MANUAL

AIRgrip MultiTASKit™

EMM0001

SAVE THIS MANUAL FOR FUTURE REFERENCE

Your product has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and

operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using

this product.

Thank you for buying a Ryobi product.

2 3

n Introduction ..................................................................................................................................................................... 2

�n General Safety Rules....................................................................................................................................................... 3

�nSymbols........................................................................................................................................................................ 4-5

��n Features........................................................................................................................................................................ 6-7

��n Assembly ......................................................................................................................................................................... 8

�n Operation.................................................................................................................................................................... 8-12

n Maintenance.................................................................................................................................................................. 13

n Troubleshooting............................................................................................................................................................. 14

�n Parts Ordering / Service ................................................................................................................................................ 16

TABLE OF CONTENTS

INTRODUCTION

This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have

been given top priority in the design of this product making it easy to maintain and operate.

Please visit our website at

www.ryobitools.com to register this product.

Model No. EMM0001

2 3

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-

ure to follow all instructions listed below, may result in

electric shock, fire and/or serious personal injury.

CAUTION:

Use of controls or adjustments or performance of pro-

cedures other than those specified herein may result in

hazardous radiation exposure.

CAUTION:

The use of an optical instrument with this product will

increase eye hazard.

The laser guide radiation used in the laser level attachment

is Class IIIa with < 5mW and 635 nm wavelengths. These

lasers do not normally present an optical hazard, although

staring at the beam may cause flash blindness.

n Avoid direct eye exposure when using the laser and do

not project the laser beam directly into the eyes of others.

Serious eye injury could result.

n Do not remove or deface any product labels. Removing

product labels increases the risk of exposure to laser

radiation.

n Do not place the unit in a position that may cause anyone

to stare into the laser beam intentionally or unintentionally.

Serious eye injury could result.

n Do not operate the laser level around children or allow

children to operate the tool. Serious eye injury could re-

sult.

n Always turn the laser level off when not in use. Leaving

the tool on increases the risk of someone inadvertently

staring into the laser beam.

n Do not operate the unit in combustible areas such as in

the presence of flammable liquids, gasses or dust.

n Always ensure the laser beam is aimed at a surface with-

out reflective properties. Shiny reflective materials are not

suitable for laser use.

n When using the base, always check to be sure the unit is

securely seated. Damage to the tool and/or serious injury

to the user could result if the unit falls.

n Handle the unit with care. Treat it as you would any other

optical device such as a camera or binoculars.

n Avoid exposing the unit to shock, continuous vibration

or extreme hot or cold temperatures. Damage to the tool

and/or serious injury to the user could result.

n The amount of weight being supported by the vacuum

base and/or helping hand should not exceed product

specifications. A greater weight may cause the product

to fail, which could cause damage to both the unit and

the workpiece being supported.

n When using the magnetic base, be cautious of putting

too many or too heavy objects on the surface.

n Do not look directly into the LEDs on the lighting attach-

ment. The brightness of the light could cause temporary

blindness.

n Save these instructions. Refer to them frequently and

use them to instruct others who may use this product. If

you loan someone this unit, loan them these instructions

also.

4 5

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-

tion of these symbols will allow you to operate the tool better and safer.

Read The Operator’s Manual

Safety Alert

No Hands Symbol

SYMBOL NAME DESIGNATION/EXPLANATION

Voltage

Current

Frequency (cycles per second)

Power

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Double-insulated construction

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations.

To reduce the risk of injury, user must read and understand

operator’s manual before using this product.

Eye Protection Always wear safety goggles, safety glasses with side shields, or

a full face shield when operating this product.

Precautions that involve your safety.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

Failure to keep your hands away from the blade will result in

serious personal injury.

Wet Conditions Alert

.../min Per Minute

Class II Construction

No Load Speed

Direct Current

Alternating Current

min Minutes

W Watt

Hz Hertz

A Amperes

V Volts

Hot Surface To reduce the risk of injury or damage, avoid contact with any

hot surface.

SYMBOLS

4 5

SYMBOLS

SERVICE

This unit has no serviceable parts. If the unit fails due to

normal wear and tear within two years of purchase, return

with original receipt for a replacement unit at no charge.

Call 1-800-525-2579 for your nearest RYOBI AUTHORIZED

SERVICE CENTER.

WARNING:

To avoid serious personal injury, do not attempt to use this

product until you read thoroughly and understand com-

pletely the operator’s manual. Save this operator’s manual

and review frequently for continuing safe operation and

instructing others who may use this product.

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL SIGNAL MEANING

DANGER:

WARNING:

CAUTION:

Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury.

(Without Safety Alert Symbol) Indicates a situation that may result in prop-

erty damage.

6 7

FEATURES

PRODUCT SPECIFICATIONS

Vacuum Base

Recommended Use................................................................................................................................................ Indoors

Power Supply .................................................................................................................................2 AA, 1.5 Volt Batteries

Battery Life ...................................................................................................4 Hours Continuous Use - Alkaline Batteries

Operating Temperature................................................................................................................................. 32°F to 104°F

Weight Capacity (on smooth surfaces).....................................................................................................................10 lbs.

Laser Head

Length of Laser Line......................................................................................................................................... Up to 30 ft.

Laser......................................................................................................................................... Class IIIa, < 5mW, 635 nm

Power Supply .................................................................................................................................2 AA, 1.5 Volt Batteries

Battery Life .................................................................................................25 Hours Continuous Use - Alkaline Batteries

Accuracy....................................................................................................................................................± 1/2 in. at 20 ft.

Lighting Head

Power Supply .................................................................................................................................2 AA, 1.5 Volt Batteries

Battery Life .................................................................................................17 Hours Continuous Use - Alkaline Batteries

Helping Hand

Weight Capacity (on smooth surfaces).......................................................................................................................5 lbs.

Extension Capacity................................................................................................................................................ 1-1/2 in.

Fig. 1

HELPING HAND

ATTACHMENT

LIGHTING

ATTACHMENT

MAGNETIC TRAY

ATTACHMENT

LASER LEVEL

ATTACHMENT

AIRGRIP™

VACUUM

BASE

ATTACHMENT

ON/OFF

BUTTON

ATTACHMENT

ON/OFF

BUTTON

BASE ON/OFF

BUTTON

TAPE MEASURE

SLOTS

ATTACHMENT

RELEASE

BUTTON

LOCKING KNOB

LOCKING

KNOB

6 7

Fig. 2

KNOW YOUR MULTITASKIT™

See Figures 1 - 2.

Before attempting to use this product, familiarize yourself

with all operating features and safety rules.

AIRGRIP™ VACUUM TECHNOLOGY

This product uses a vacuum base that can adhere to smooth

surfaces. Using the vacuum seal prevents wall damage

caused by nails or adhesive tape. The vacuum base is used

to hold the MultiTASKit™ attachments and will support a

weight of up to 10 lbs. Recessed grooves on the base can

be used for attaching the end of a chalk line, and side slots

are available for holding the end of a tape measure.

CASE

A zippered fabric case stores and protects the tool and ac-

cessories when not in use.

HELPING HAND ATTACHMENT

Use the helping hand attachment to assist in holding small

amounts of weight up to 5 lbs. The hand can be extended

up to 1-1/2 in. and will rotate 360˚ horizontally and 35˚

vertically.

HOOK-AND-LOOP STRAP

The hook-and-loop strap can be used along with the multi-

function base to attach the unit to a variety of irregularly

shaped surfaces.

LASER LEVEL ATTACHMENT

The laser level attachment emits a laser line of up to 30 feet

and can be rotated 360˚.

LIGHTING ATTACHMENT

The lighting attachment has three medium-intensity LED

lights to provide light in dark work areas. It can be adjusted

vertically up to 90˚ and rotated horizontally 360˚.

MAGNETIC TRAY ATTACHMENT

The magnetic tray attachment can be used for holding screws,

nuts, and bolts. It features two holes for holding screwdriv-

ers or other small tools, and has a recessed front edge so

tools can lie flat on the surface. The tray can be adjusted

90˚ vertically and 360˚ horizontally.

MULTI-FUNCTION BASE

The multi-function base allows the unit to be used on irregu-

larly shaped walls or objects. It features built-in loops for a

hook-and-loop strap and magnetic sides to hold securely

to magnetic surfaces. The base also protects the unit when

using on a dusty or dirty surface and during storage.

ROUGH-SURFACE ADAPTOR

The rough-surface adaptor increases the number of surfaces

on which the AIRgrip vacuum can be used.

FEATURES

HOOK-AND-LOOP

STRAP

CASE

MULTI-FUNCTION

BASE

ROUGH-SURFACE

ADAPTOR

8 9

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

n Carefully remove the tool and any accessories from the

box. Make sure that all items listed in the packing list are

included.

n Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

n Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

n If any parts are damaged or missing, please call

1-800-525-2579 for assistance.

PACKING LIST

Vacuum Base

Multi-function Base

Laser Level Attachment

Lighting Attachment

Magnetic Tray Attachment

Helping Hand Attachment

WARNING:

If any parts are missing, do not operate this tool. Please

return to the place of purchase or call 1-800-525-2579

for assistance.

WARNING:

Do not attempt to modify this tool or create accesso-

ries not recommended for use with this tool. Any such

alteration or modification is misuse and could result in a

hazardous condition leading to possible serious personal

injury.

�NOTE: Before initial use, wipe the AIRgrip seal with a damp

cloth to remove any residue.

OPERATION

WARNING:

Do not allow familiarity with tools to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this tool. The use of at-

tachments or accessories not recommended can result

in serious personal injury.

APPLICATIONS

You may use this tool for the purposes listed below:

n Single-person measuring

n Hanging pictures

n Aligning electrical outlets or ceiling lights

n Holding small screws and tools

n Installing towel bars, curtains, etc.

n Installing chair rail and crown molding

n Laying tile, flooring, or wallpaper

n Holding a chalk line in place

n Temporary lighting under sinks, in closets, and for cars

n Simplifying two-person jobs to one person

INSTALLING BATTERIES IN VACUUM BASE

See Figure 3.

The battery compartment is located beneath the ridged area

of the vacuum base.

To open:

n Pull the battery cover out to remove.

n Install two AA batteries according to polarity indicators

inside the battery compartment.

n Place the battery cover plate back onto the base and

secure.

4 AA Batteries

Hook-and-Loop Strap

Rough Surface Adaptor

Case

Operator’s Manual

Fig. 3

COVER

PLATE

VACUUM

BASE

BATTERY

COMPARTMENT

8 9

OPERATION

TURNING THE VACUUM BASE ON/OFF

See Figure 4.

Press the button located on the side of the vacuum base

to turn it ON and OFF. Always wait for at least 5 seconds

between stopping and restarting the unit.

USING THE AIR-GRIP™ VACUUM BASE

See Figures 5 - 6.

Vacuum grip technology allows the unit to be attached to

most smooth surfaces.

NOTE: The multi-function base is not used when mounting

by vacuum grip.

n Place the unit on the surface you want it secured to and

push against the surface slightly to engage the seal.

n Continue to hold the unit against the surface while press-

ing the on/off button.

n Release the unit when you hear a change in motor

sound.

n To release the vacuum seal, turn the power to the vacuum

base off. For fast release, press the protrusion on the back

of the unit.

NOTE: Pulling the unit off the wall without releasing the

vacuum could damage the tool.

The grooves located in the vacuum base can be used

to help hold a tape measure or chalk line when working

unassisted.

ROUGH-SURFACE ADAPTOR

See Figure 7.

By using the rough-surface adaptor, you can use the AIRgrip

feature to position the unit on many non-smooth surfaces,

including brick and painted cinder block.

NOTE: The AIRgrip feature cannot be used with stucco or

unpainted cinder block.

n Position the rough-surface adaptor on the surface where

you want to secure the vacuum base.

NOTE: The dotted lines on the adaptor should be

visible.

n Place the unit against the adaptor on the dotted lines,

and push in slightly to engage the seal.

n Continue to hold the unit against the surface while press-

ing the on/off button.

n Release the unit when you hear a change in motor

sound.

Fig. 4

Fig. 5

Fig. 6

Fig. 7

PUSH THE ON/OFF

BUTTON TO TURN

THE VACUUM BASE

ON OR OFF

PUSH IN SLIGHTLY

TO SEAL

GROOVES

TAPE MEASURE

ROUGH-SURFACE

ADAPTOR

10 11

OPERATION

USING THE MULTI-FUNCTION BASE

See Figures 8 - 9.

To use the hook-and-loop strap or magnetic mounts, the

multi-function base must be installed. To install the base:

n While holding the vacuum base with the on/off button

facing you, align the raised ridge on the multi-function

base with the groove on the vacuum base.

n Slide the two completely together.

HOOK-AND-LOOP STRAP: The strap can be used to at-

tach the base to irregularly shaped objects such as pipes,

2x4s, 2x6s, or metal grates.

To install the strap:

n Attach the strap to one side of the multi-function base

by threading it through the loop and fastening.

n Position the unit on the surface where you want it

mounted.

n Wrap the strap around the object being mounted (pipe,

board, etc.).

n Place the loose end of the strap through the remaining

loop on the base and secure.

CAUTION:

Use caution when using the multi-function base. Do not

orient the unit in a way that will allow the vacuum base

to slide or fall out of the multi-function base.

MAGNETIC MOUNTS: The magnetic mounts of the multi-

function base allow the unit to be attached securely to

magnetically attracted metal surfaces.

INSTALLING BATTERIES IN THE LASER

LEVEL AND LIGHTING ATTACHMENTS

See Figure 10.

The laser level and lighting attachments are powered inde-

pendently from the vacuum base. Each attachment requires

two AA batteries to operate.

To install batteries:

n Press the battery compartment access button on the laser

or lighting attachment to separate top of attachment from

attachment base.

n Install batteries according to the polarity indicators in the

compartment.

n Reinstall attachment base. When secure, battery access

button will click back into place.

Fig. 8

Fig. 9

Fig. 10

LOOP

HOOK-AND-LOOP

STRAP

MULTI-FUNCTION

BASE

BOTTOM OF

MULTI-FUNCTION

BASE

MAGNETS

MULTI-FUNCTION

BASE VACUUM BASE

GROOVES

RAISED RIDGE

BATTERY

COMPARTMENT

ACCESS

BUTTON

ATTACHMENT

BASE

BATTERIES

Inhaltsverzeichnis

Andere Ryobi Laser-Nivelliergerät Handbücher

Ryobi

Ryobi ELL1500 Bedienungsanleitung

Ryobi

Ryobi ELL1002 Bedienungsanleitung

Ryobi

Ryobi RBCLLG2 Bedienungsanleitung

Ryobi

Ryobi TLL-90 Bedienungsanleitung

Ryobi

Ryobi ELL1501 Bedienungsanleitung

Ryobi

Ryobi AirGrip ELL1001 Bedienungsanleitung

Ryobi

Ryobi AIRgrip ProCross ELL0006 Bedienungsanleitung

Ryobi

Ryobi PHONEWORKS ES1600 Bedienungsanleitung

Ryobi

Ryobi RLL10RD Bedienungsanleitung

Ryobi

Ryobi AIRgrip ELL0001 Bedienungsanleitung

Ryobi

Ryobi ELL1500 Bedienungsanleitung

Ryobi

Ryobi ELL1750 Bedienungsanleitung

Ryobi

Ryobi AIRgrip RLAG113S Bedienungsanleitung

Ryobi

Ryobi AIRgrip ELL0002 Bedienungsanleitung

Ryobi

Ryobi RB360GLL Bedienungsanleitung

Ryobi

Ryobi CLL-100 Bedienungsanleitung

Ryobi

Ryobi CLL-360 Bedienungsanleitung

Ryobi

Ryobi AirGrip ELL1001 Bedienungsanleitung

Ryobi

Ryobi RBCLLG1 Bedienungsanleitung

Ryobi

Ryobi LSL-100 Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung