Saitek Cyborg 3D Bedienungsanleitung

CYBORG 3D FORCE STICK

USER MANUAL

POV Hat Switch

4 Fire Buttons

Trigger

Throttle

4 Buttons

SAITEK CYBORG 3D FORCE STICK

The Saitek Cyborg 3D Force Stick is the ultimate controller for the discerning gamer. This awesome joystick comes

complete with sublime new looks and Immersion’s® patented TouchSense™ technology to take the gaming experience

to a new level of interactivity.

The haptic technology inside dramatically improves gamers’ performance and power – by unlocking their sense of

touch and allowing them to feel what they see and do on the computer screen. The Force Feedback Technology is

combined with a full range of features to put you in total control of the game.

Main Control Features

•Rapid-Fire Trigger - with instant response when you most need it

•8 fully programmable fire buttons deliver personal controller settings

•Dual handle throttle for left- or right-handed gaming

•8-way point-of-view hat switch for peripheral vision in 3D games or changing weapons

•3D Rudder Twist on handle for increased realism in flight sim games

•Simple ‘plug-and-play’ USB connection

GETTING STARTED

Note: Please do not connect your Cyborg 3D Force until asked to by the installation procedure.

Before connecting the Cyborg 3D Force to your PC, you need to connect it to your mains supply using the AC/DC

adapter (supplied). This attaches via the front of the unit next to the USB cable.

Note: When you have finished playing with your Cyborg 3D, we recommend you switch off the power adapter at the

mains and unplug it.

Saitek Smart Technology Software

Saitek Smart Technology software is the software that Saitek supplies for our high-end game controllers. The Smart

Technology software comprises the product drivers for these Saitek controllers and the optional programming software.

By keeping the two separate, the Smart Technology software offers two types of installation to suit the individual

gamer’s needs, which means even more gamers can enjoy these quality Saitek products.

The Quick Install loads the product drivers only (all that is needed to use the controller) and is suitable for the new or

Typical User. This install is fast and simple and will have the gamer up and running in no time at all.

The Full Install loads the product drivers and the Saitek Smart Technology programming software and is suitable for the

Advanced User. The programming software delivers a powerful set of features for the ultimate configuration in the

game. Although it is recommended for the seasoned gamer, it can be installed at any time. This gives the typical user a

chance to get to know the controller before taking gaming to the next level.

INSTALLATION FOR USERS OF WINDOWS® XP

Quick Install (Drivers Only)

This installation will ONLY install the drivers for your Saitek controller. The Full Install (below), will install the drivers

and the Saitek Smart Technology programming software for your Saitek controller.

Note: Please do not connect the USB connector until asked to by the installation procedure.

1 With your computer switched on, close down any programs that are currently running and insert the Saitek

Smart Technology CD into your CD-ROM drive.

2 When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start

from the Windows® Taskbar, then Run and type D:\Install.exe and click OK - where D:\ is letter of your CD-

ROM drive).

3 After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue.

4 At the Device Driver Installation screen, click on Next and follow the on-screen instructions.

5 When prompted, plug your USB connector into your computer, then click on Configure and then Continue

Anyway. Follow the on-screen instructions until you reach the Controller Properties screen.

6 When the Controller Properties screen appears, click Next to view the Test screen.

7 Now try out all your controller’s buttons and controls to show that it is working properly. When you have finished,

click OK.

8 At the Programming Software screen, select Typical User and click Next.

9 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

10 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.

Full Install (Drivers and Programming Software)

This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek con-

troller.

1 Follow points 1 – 7 of the install procedure in Quick Install (Drivers Only), then at the Programming Software

screen, select Advanced User and click Next.

2 At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions. At this

point you will be asked to install such features as the Saitek Magic Mouse and Saitek Magic Keyboard (these

are what XP calls the various elements of your Saitek controller). Continue to click on Next, Continue Anyway

and Finish to accept the installation until the Installation of programming software successful screen appears.

3 At the Installation of programming software successful screen, click Next.

4 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

5 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the

3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and

click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.

To access the programming software click on the Saitek Smart Technology icon that the installation left on your

Desktop.

For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.

INSTALLATION FOR USERS OF WINDOWS® 2000

Quick Install (Drivers Only)

This installation will ONLY install the drivers for your Saitek controller. The Full Install (below), will install the drivers

and the Saitek Smart Technology programming software for your Saitek

controller.

Note: Please do not connect the USB connector until asked to by the installation procedure.

1 With your computer switched on, close down any programs that are currently running and insert the Saitek

Smart Technology CD into your CD-ROM drive.

2 When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start

from the Windows® Taskbar, then Run and type D:\Install.exe and click OK - where D:\ is letter of your CD-

ROM drive).

3 After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue.

4 At the Device Driver Installation screen, click on Next and follow the on-screen instructions.

5 When prompted, plug your USB connector into your computer, then click on Configure.

6 When the Controller Properties screen appears, click Next to view the Test screen.

7 Now try out all your controller’s buttons and controls to show that it is working properly. When you have finished,

click OK.

8 At the Programming Software screen, select Typical User and click Next.

9 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

10 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.

Full Install (Drivers and Programming Software)

This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek con-

troller.

1 Follow points 1 – 7 of the install procedure in Quick Install (Drivers Only), then at the Programming Software

screen, select Advanced User and click Next.

2 At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions.

3 Then at the Installation of programming software successful screen, click Next.

4 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

5 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the

3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and

click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.

To access the programming software click on the Saitek Smart Technology icon that the installation left on your

Desktop.

For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.

INSTALLATION FOR USERS OF WINDOWS® 98 AND ME

Quick Install (Drivers Only)

This installation will install the drivers for the Saitek controller only.

Note: Please do not connect the USB connector until asked to by the installation procedure.

1 With your computer switched on, close down any programs that are currently running and insert the Saitek

Smart Technology CD into your CD-ROM drive.

2 When the Welcome screen appears, click Next to continue. (If the CD does not run automatically, select Start

from the Windows® Taskbar, then Run and type D:\Setup.exe and click OK).

3 After reading and accepting the Disclaimer, click Next to continue.

Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8.1 installed on your com-

puter. The installer will automatically recognize if this software needs to be added, and will allow you to install it

directly from the Saitek Product Companion CD, if necessary.

If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the on-screen instructions, and then

restart your computer when prompted. Make sure that you leave the Saitek CD in the drive when restarting.

After this software has been installed, you will automatically be taken to the installation to continue with the next

step.

4 Follow the on-screen instructions and select Yes, I want to restart my computer now when prompted.

5 After the restart, at the Device Driver Installation screen, click on Next and follow the on-screen instructions.

6 When prompted, plug your USB connector into your computer.

7 When the Controller Properties screen appears, click Next to view the Test Screen.

8 Now try out all your controller buttons and controls to show that it is working properly. When you have finished, click

OK.

9 At the Programming Software screen, select Typical User and click Next.

10 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

11 Click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite games.

Full Install (Drivers and Programming Software)

This installation will install the drivers and the Saitek Smart Technology programming software for the Saitek con-

troller.

1 Follow points 1 – 8 of the install procedure in Quick Install (Drivers Only), then at the Programming Software

screen, select Advanced User and click Next.

2 At the Programmable Controller Drivers screen, click Update and follow the on-screen instructions. At this

point you will be asked to insert your Windows® CD, however, DO NOT do this, just click on OK. At the next

screen, type C:\windows\system into the prompt and click OK and follow the on-screen instructions.

3 At the Installation of programming software successful screen, click Next.

4 At the Registration screen, select Register my Saitek controller online, click next and follow the on-screen instruc-

tions or select Register Later and click Next.

5 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the

3-D programming environment. If you do not wish to see the Profile Editor at this point, just uncheck the box

and click on Finish to complete the installation. Your Saitek controller is now ready for use with your favorite

games.

For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.

Installing the Programming Software at a Later Date

If you chose the Quick Install (Drivers Only) you might want to install the Saitek Smart Technology programming

sofware once you have mastered your new Saitek controller. To do this, simply reinstall your controller following the

Full Install (Drivers and Programming Software) above.

PROGRAMMING YOUR SAITEK CYBORG 3D FORCE WITH SAITEK

SMART TECHNOLOGY PROGRAMMING SOFTWARE

Introducing Saitek Smart Technology Programming Software

Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek

controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with

the ultimate configuration for total interaction. Despite a level of sophistication previously unseen in the market, and

because of the Saitek Smart Technology inside, the software remains simple and intuitive to use.

Features of Smart Technology Programming Software:

•Quick and easy setup in any game

•Personalize the controller settings for your favorite games

•Configure your controller with an on-screen 3D model and interface

•Multiple setup option for each controller - ideal if a controller is used by several people

•Program special moves with sophisticated timing features

•Special game setups available as ‘Profiles’ from the Saitek website and on the Smart Technology CD

•Download the latest version of Saitek Smart Technology software from the Saitek website

What is a Profile?

AProfile is a custom setup for improved gameplay – consisting of a set of commands that are pre-assigned to the

buttons or axes of your controller. There are over two hundred pre-written Profiles available on the Saitek Smart

Technology Disk that accompanies this device or on the Saitek Website – www.saitek.com. (Please check the website

for new or improved Profiles, which are being added regularly).

How do I program my Cyborg 3D Force?

After getting to know your Cyborg 3D Force, you can start creating your own personal Profiles with the Saitek Smart

Technology programming software (SST). This software has virtually unlimited programming capabilities and allows you

to customize the Cyborg 3D Force to your exact gaming needs.

For a full guide to programming your Saitek Cyborg 3D Force, see the Saitek Smart Technology - Programming Guide

on the CD under D:\Eng\SSTProgrammingManual.pdf or on the Saitek website: www.saitek.com.

Creating a Profile for a Game

1 Open the SST software by double-clicking on the Smart icon the installation left on your desktop.

2 Next, double-click on New Game Wizard and then click on Next.

3 You will now see a list of all the .exe files on your PC to which SST can be assigned. Highlight the name of the

game you wish to create a Profile for, eg, tomb4.exe, then click Next.

4 On the following screen, click Next, then leave both options ticked in the Auto Activation screen and click on Next

again. Select your controller from the list and click on Next once more.

5 In the Button Assignments screen, leave the box unchecked and click Next

Andere Handbücher für Cyborg 3D

Inhaltsverzeichnis

Andere Saitek Videospiel-Controller Handbücher

Saitek

Saitek PX4000 Bedienungsanleitung

Saitek

Saitek PP34 Bedienungsanleitung

Saitek

Saitek P1500 RUMBLE PAD Bedienungsanleitung

Saitek

Saitek PS1000 Bedienungsanleitung

Saitek

Saitek evo Bedienungsanleitung

Saitek

Saitek PC Flight Stick Bedienungsanleitung

Saitek

Saitek Pro Flight Cessna Rudder Pedal Bedienungsanleitung

Saitek

Saitek Pacific AV8R Bedienungsanleitung

Saitek

Saitek Cyborg evo Force Bedienungsanleitung

Saitek

Saitek X-65F Pro FLIGHT COMBAT CONTROL SYSTEM Bedienungsanleitung

Saitek

Saitek P990 Bedienungsanleitung

Saitek

Saitek Pasific AV8R Bedienungsanleitung

Saitek

Saitek Pro Flight X52 Pro Bedienungsanleitung

Saitek

Saitek ST100 Bedienungsanleitung

Saitek

Saitek P220 Bedienungsanleitung

Saitek

Saitek X52 Bedienungsanleitung

Saitek

Saitek Cyborg 3D Bedienungsanleitung

Saitek

Saitek Pro Flight Throttle Quadrant Bedienungsanleitung

Saitek

Saitek Combat Rudder Pedals Bedienungsanleitung

Saitek

Saitek X-56 RHINO H.O.T.A.S. SYSTEM Bedienungsanleitung

Saitek

Saitek PS30 Bedienungsanleitung

Saitek

Saitek Aviator Bedienungsanleitung

Saitek

Saitek P2500 Bedienungsanleitung

Saitek

Saitek P2000 Bedienungsanleitung

Beliebte Videospiel-Controller Handbücher anderer Marken

Wasp

Wasp SL-6610 Bedienungsanleitung

JKG

JKG JKG2022A Bedienungsanleitung

Marvo

Marvo MG08 Bedienungsanleitung

Belkin

Belkin F8GBPC001 Bedienungsanleitung

GameSir

GameSir Z2 Bedienungsanleitung

Laser

Laser PCO-AGAMEC-BK Bedienungsanleitung

Cortex

Cortex VEXnet Bedienungsanleitung

Gioteck

Gioteck HF-1 Bedienungsanleitung

Nacon

Nacon DAIJA ARCADE STICK Bedienungsanleitung

Thrustmaster

Thrustmaster dual trigger Bedienungsanleitung

SHAKS

SHAKS S1+ Bedienungsanleitung

YCCTEAM

YCCTEAM Joy Con Bedienungsanleitung

Hyperkin

Hyperkin Smartboy Bedienungsanleitung

Nerf

Nerf DuraGrip Bedienungsanleitung

MoveMaster

MoveMaster MoveMaster Bedienungsanleitung

WinWing

WinWing Super Libra J1 Bedienungsanleitung

ECCI

ECCI Trackstar 6000 Series Bedienungsanleitung

Logitech

Logitech 963291-0403 - Attack 3 Joystick Bedienungsanleitung