Sakai SW352 Bedienungsanleitung
PREFACE
Generally, rollers tend to come large-sized and find their applications in
dangerous fields such as rough terrain, steep slopes or slippery areas. Faulty
rollers may risk a grave accident.
For purpose-built rollers to negotiate problem terrain with the ultimate in
performance maintained free from failure over the longest possible period of
time, adequate handling and regular preventive maintenance recommended
are of prime importance. If a trouble developes, it should be effectively
corrected with proper safety measures taken.
This service manual is intended to serve as a guide particularly for
maintenance personnel to perform quality service by gaining working
knowledge of and reliable maintenance techniques for machines in question.
Included in this literature are descriptions of SPECIFICATIONS, STRUCTURE
& OPERATION, INSPECTION & ADJUSTEMNT, FAULT DIAGNOSIS and
DISASSEMBLY & ASSEMBLY. Systematic explanations are being given to
each of these five cathegories in this sequence.
Rollers principally concern qualitative factors as represented by ‘compaction
density’, to say nothing of quantitative elements like ‘productivity’.
SPECIFICATIONS section includes performance data of major significance
e.g. ‘vibratory frequency’ to be checked when servicing machines in question.
For reasonable maintenance services, it is a precondition to know the vital
portions of machines in question and how they work. Referring to relevant
electric wiring and hydraulic circuit diagrams, STRUCTURE & OPERATION
instructs location of key units and function of systems into which the key units
are assembled.
Adjustment practice to restore a faulty machine to the normal operating state
involves measurement procedure which compares measured figures with the
standard values. INSPECTION & ADJUSTMENT specifies conditions to
measurement and standard values. Safety precautions are also given where
necessary. Illustrations included indicate important points like gauge
connection location.
Numerous ways are available to track down the cause of trouble. Important is,
of course, to make a diagnosis in a reasonable manner, not blindly. FAULT
DIAGNOSIS provides a detailed description of ‘Precautions for Trouble
Diagnosis’ and ‘How to Make a Diagnosis’ first, then proceeds to instruction of
diagnosis procedures on a variety of fault diagnosis modes. For effective fault
finding, this chapter employs block-type flow charts easy to handle. Electric
wiring diagrams used herein identify wires by means of color coding and
identification numbers. Standard values or fault finding conditions are noted
where necessary.
In the final section, DISASSEMBLY & ASSEMBLY, descriptions are being
given of removal, reinstallation, disassembly and reassembly procedures of
key units in this order with many solid illustrations easy to understand in order
to display vital part of units to handle. Because works to be performed in this
cathegory will enevitably have a high potential to invite danger, this section
involves many precautionary statements.
Fully understand the contents of this manual and make the best of it. We will
make utmost efforts to make this manual more useful through revisions. Your
opinions and advices will be particularly welcome and carefully considered.
CONTENTS
SPECIFICATIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
1-001
STRUCTURE AND OPERATION・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
2-001
INSPECTION AND ADJUSTMENT ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3-001
FAULT DIAGNOSIS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4-001
DISASSEMBLY AND ASSEMBLY ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
5-001
SPECIFICATIONS
1-001
SPECIFICATIONS
1. External Views and Specification Data
1-1. SW352・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1-002
1-2. TW352 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1-003
1-3. SW502・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1-004
1-4. TW502 ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・1-005
1-002
SPECIFICATIONS
1.External Views and Specification Data
1-1. SW352
1200
TW5021001
2000
2675
540
1200
1290
250
φ675
φ675
540
1580
NOTE: Gradability is the calculated value. It may vary with ground surface conditions.
Model SW352
Weight:
Gross weight
Empty weight
2,940 kg (6,485 lbs)
2,740 kg (6,045 lbs)
Dimension:
Overall length
Overall width
Overall height
Wheelbase
Wheel
Front
Rear
2,675 mm (105”)
1,290 mm ( 51”)
1,580 mm ( 62”)
2,000 mm ( 79”)
Roll (dia. x width)
675 x 1,200 mm (27” x 47”)
Roll (dia. x width)
675 x 1,200 mm (27” x 47”)
Performance:
Travel speed
(forward/reverse)
Low
High
0 ~ 9 km/h (0 ~ 5.6 mile/h)
0 ~ 12 km/h (0 ~ 7.5 mile/h)
Vibrating power:
Frequency
Centrifugal force
Gradability
Rolling width
Minimum turning radius
55 Hz
20.6 kN (4,630 lbs)
21 degrees
1,200 mm (47”)
3.8 m (150”)
Engine:
Model
Total displacement
Rated output
Max. torque
KUBOTA “D1503-KA” Diesel Engine
1.499 liters (91 cu.in)
20.1 kW/2,300 min-1
(27 HP/2,300 min-1)
97 N·m/1,500 min-1
(72 ft-lb/1,500 rpm)
Tank capacity:
Fuel tank
Hydraulic tank
Sprinkler tank
40 liters (10.6 gal)
43 liters (11.4 gal)
200 liters ( 53 gal)
SPECIFICATIONS
1-003
1-2. TW352
TW5021002
9
.
5
/
6
5
-
1
5
-
6
P
R
2000
2675
540
1200
1290
250
φ675
540
1580
398279 279
NOTE: Gradability is the calculated value. It may vary with ground surface conditions.
Model TW352
Weight:
Gross weight
Empty weight
2,640 kg (5,820 lbs)
2,440 kg (5,380 lbs)
Dimention:
Overall length
Overall width
Overall height
Wheelbase
Wheel
Front
Rear
2,675 mm (105”)
1,290 mm ( 51”)
1,580 mm ( 62”)
2,000 mm ( 79”)
Roll (dia. x width)
675 x 1,200 mm (27” x 47”)
Tire
9.5/65–15–6PR
Performance:
Travel speed
(forward/reverse)
Low
High
0 ~ 9 km/h (0 ~ 5.6 mile/h)
0 ~ 12 km/h (0 ~ 7.5 mile/h)
Vibrating power:
Frequency
Centrifugal force
Gradability
Rolling width
Minimum turning radius
55 Hz
20.6 kN (4,630 lbs)
21 degrees
1,200 mm (47”)
3.8 m (150”)
Engine:
Model
Total displacement
Rated output
Max. torque
KUBOTA “D1503-KA” Diesel Engine
1.499 liters (91 cu.in)
20.1 kW/2,300 min-1
(27 HP/2,300 min-1)
97 N·m/1,500 min-1
(72 ft-lb/1,500 rpm)
Tank capacity:
Fuel tank
Hydraulic tank
Sprinkler tank
Liquid tank
40 liters (10.6 gal)
43 liters (11.4 gal)
200 liters ( 53 gal)
10 liters ( 2.6 gal)
SPECIFICATIONS
1-004
1-3. SW502
TW5021003
1390
280
φ800
φ800
1300
635
635
1700
3100
2300 1300
NOTE: Gradability is the calculated value. It may vary with ground surface conditions.
Model SW502
Weight:
Gross weight
Empty weight
4,090 kg (9,020 lbs)
3,780 kg (8,335 lbs)
Dimension:
Overall length
Overall width
Overall height
Wheelbase
Wheel
Front
Rear
3,100 mm (122”)
1,390 mm ( 55”)
1,700 mm ( 67”)
2,300 mm ( 91”)
Roll (dia. x width)
800 x 1,300 mm (31” x 51”)
Roll (dia. x width)
800 x 1,300 mm (31” x 51”)
Performance:
Travel speed
(forward/reverse)
Low
High
0 ~ 7.5 km/h (0 ~ 4.7 mile/h)
0 ~ 10.0 km/h (0 ~ 6.2 mile/h)
Vibrating power:
Frequency
Centrifugal force
Gradability
Rolling width
Minimum turning radius
21 degrees
1,300 mm (51”)
4.3 m (169”)
Low
55 Hz
26.5 kN (5,955 lbs)
High
55 Hz
34.3 kN (7,710 lbs)
Engine:
Model
Total displacement
Rated output
Max. torque
KUBOTA “V2203KA”
2.197 liters (134 cu.in)
30.6 kW/2,300 min-1
(41 HP/2,300 min-1)
141 N·m/1,600 min-1
(104 ft-lb/1,600 rpm)
Tank capacity:
Fuel tank
Hydraulic tank
Sprinkler tank
50 liters ( 13 gal)
49 liters (12.9 gal)
310 liters ( 82 gal)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sakai Baumaschinen Handbücher
Sakai
Sakai SW880-1 Installationsanleitung
Sakai
Sakai 544 Leitfaden
Sakai
Sakai SW300-1 Installationsanleitung
Sakai
Sakai SV410-2 Installationsanleitung
Sakai
Sakai SW880-1 Bedienungsanleitung
Sakai
Sakai SV400D-2 Installationsanleitung
Sakai
Sakai SV201-1 Installationsanleitung
Sakai
Sakai SV540 Series Installationsanleitung
Sakai
Sakai SW800-II Installationsanleitung
Sakai
Sakai R2-4 Installationsanleitung
Sakai
Sakai SV540 Series Installations- und Betriebshandbuch
Sakai
Sakai SV544 Leitfaden
Sakai
Sakai SV510-III Installationsanleitung
Sakai
Sakai CR271 Installationsanleitung
Sakai
Sakai SW884 Bedienungsanleitung
Sakai
Sakai SW354 Installationsanleitung
Sakai
Sakai CR271 Installations- und Betriebshandbuch
Sakai
Sakai SW770 Installationsanleitung
Sakai
Sakai SW800 Series Installationsanleitung
Sakai
Sakai SV204 Series Installations- und Betriebshandbuch
