Samson Expedition XP300 Bedienungsanleitung

Owner's Manual

Samson Technologies Corp.

278-B Duffy Ave

Hicksville, New York 11801

Phone: 1-800-3-SAMSON (1-800-372-6766)

Fax: 631-784-2201

www.samsontech.com

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

and any use of such marks by Samson Technologies is under license. Other trademarks and

trade names are those of their respective owners.”

Important Safety Information

If you want to dispose this product, do not mix it with general household waste. There

is a separate collection system for used electronic products in accordance with legisla-

tion that requires proper treatment, recovery and recycling.

Private household in the 28 member states of the EU, in Switzerland and Norway may

return their used electronic products free of charge to designated collection facilities or

to a retailer (if you purchase a similar new one).

For Countries not mentioned above, please contact your local authorities for a correct method of

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, re-

covery and recycling and thus prevent potential negative effects on the environment and human

health.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of non-insulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance instructions in the

literature accompanying the appliance.

ATTENTION

RISQUE DE CHOC ÉLECTRONIQUE -

NE PAS OUVRIR

CAUTION

To prevent electric shock hazard, do not connect to mains power supply while

grille is removed.

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

XP300 • Portable PA System 3

Important Safety Information

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience

receptacles, and at the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lightening, sort or when unused for long periods of time.

14. Refer all servicing to qualiﬁed personnel. Service is required when the apparatus has been

damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. This appliance shall not be exposed to dripping or splashing water and that no object ﬁlled

with liquid such as vases shall be placed on the apparatus.

16. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert.

17. Please keep a good ventilation environment around the entire unit.

18. POWER ON/OFF SWITCH: For products with a power switch, the power switch DOES NOT

break the connection from the mains.

19. MAINS DISCONNECT: The plug should remain readily operable. For rack-mount or

installation where plug is not accessible, an all-pole mains switch with a contact separation

of at least 3mm in each pole shall be incorporated into the electrical installation of the rack

or building.

20. Warning: The apparatus shall be connected to a MAINS socket outlet with a protective

earthing connection.

Important Safety Information

FCC Notice

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modiﬁcations not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirement. The device can be

used in portable exposure condition without restriction.

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

Congratulations on purchasing the Expedition XP300 Portable PA System from Samson! The

XP300 is a compact, all-in-one, portable PA system featuring a six-channel mixer and 300

watts of onboard power with dual 6” 2-way speakers, making it an ideal solution for a variety

of small- to medium-sized sound reinforcement applications. The XP300 is also extremely

portable, thanks to its lightweight and unique “Slide and Lock” design.

The six-channel mixer can be removed from the speaker for tabletop use or can be stand

mounted using the Samson SMS150 Mixer Stand Holder. It features two XLR inputs for

connecting microphones, one channel for connecting a stereo signal from an MP3 player, or

other electronic device. There’s also a built-in, 24-bit digital effects processor to add studio

quality effects to your voice or instruments. For music playback, the XP300 features wireless

Bluetooth®connectivity, to stream audio from your smart phone, tablet, or computer. The

mixer provides a robust output, with 300 watts total power from the lightweight, Class D

ampliﬁer section. The XP300 employs a matched speaker system with dual 2-way enclosures

that have proprietary 6” woofers and 1” high frequency drivers. To help project sound to a

larger audience, the XP300 speakers can be mounted on standard speaker stands, thanks to

the integral pole mount receptacles. The XP300 is constructed using durable ABS high impact

plastic, making it super road tough and, at the same time, lightweight.

We recommend you keep the following records for reference, as well as a copy of your sales

receipt.

Serial number: _____________________________________________________

Date of purchase: ___________________________________________________

If you have any questions or comments regarding the XP300 Portable PA System or any other

products from Samson, do not hesitate to contact us at [email protected].

With proper care and maintenance, your XP300 Portable PA System will operate trouble-

free for many years. Should your XP300 Portable PA System ever require servicing, a Return

Authorization (RA) number must be obtained before shipping your unit to Samson. Without this

number, the unit will not be accepted. Please visit www.samsontech.com/ra for an RA number

prior to shipping your unit. Please retain the original packing materials and, if possible, return

the unit in its original carton. If your XP300 Portable PA System was purchased outside of the

United States, contact your local distributor.

Introduction

XP300 • Portable PA System 5

Features

• Compact stereo PA system with onboard mixer, and 300 watt power ampliﬁer that

packs up into a single case.

• 2-way vented speaker enclosures with 6” woofers and 1” high frequency drivers.

• Internal 2 x 150 watt lightweight Class D power ampliﬁer.

• Removable six channel mixer with two Mic inputs, USB Wireless mic input, Stereo

Line Input channel and Bluetooth®

• Bass and Treble controls on the ﬁrst three input channels.

• USB jack for connecting a Samson XPD Wireless microphone receiver.

• Sixteen, 24-bit digital effects.

• Bluetooth® connectivity allows you to stream wireless audio from your

smartphone, tablet, or computer.

• Sub output allows for connecting an active subwoofer to expand the system.

• Includes 2 x 10’ speaker cables.

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

Getting Started

1. Remove the mixer by turning the quarter turn screw counterclockwise towards the

RELEASE position.

LOCK

RELEASE

2. Carefully hold the mixer to remove it from the speaker.

3. Remove the accessory compartment

cover by turning the quarter turn screw

counterclockwise towards the RELEASE

position, and remove the included AC and

speaker cables.

4. Replace the accessory panel by aligning

the bottom of the panel with the slots.

Make sure the quarter turn screw is in the

RELEASE position; then close the panel

and turn the quarter turn screw clockwise

to LOCK.

XP300 • Portable PA System 7

5. Position the speakers on the ﬂoor or on standard

speaker stands.

Getting Started

6. Using one of the included speaker cables, connect the mixer’s LEFT SPEAKER OUT to the

left speaker’s input connector. Next, use the second included speaker cable to connect the

RIGHT SPEAKER OUT to the right speaker’s input connector.

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

Quick Start

1. Be sure that the XP300’s POWER switch is set to the OFF position.

2. Turn each of the channel LEVEL and MASTER volume controls fully counterclockwise, to

the “0” position.

3. Next, connect one side of the included power cable to the XP300 mixer’s power inlet and

the other to a grounded AC power outlet.

4. Connect your microphones using standard XLR cables, instruments using 1/4” phone

cables, and MP3 player using 1/8” cable, into the appropriate jacks on the mixer.

5. If using a Samson XPD Wireless Microphone ssytem, plug the receiver into the CH 2 USB

jack.

6. Switch on all equipment connected to the XP300 first, then switch the XP300’s POWER

switch to the ON position.

7. Turn the MASTER level control about 1/2 of the way up.

8. Start talking or playing into channel 1 while slowly adjusting the LEVEL control until you

have reached the desired level. Do the same for each channel you are using.

9. If you notice that the LIMITER indicator is lighting constantly, turn the MASTER volume

down so that the indicator only lights occasionally during loud hits.

XP300 • Portable PA System 9

Quick Start

To add depth to the mix or smooth out vocals, you can apply effects such as reverb to the first

two channels. To do this:

10. Use the PROGRAM selector to choose one of the 16 built-in digital effects.

11. Raise the EFFECTS level controls on the channel(s) to which you would like to add the

effect.

12. Slowly turn up the effects SEND knob until the desired sound is reached.

The XP300 input channels feature a 2-band equalizer allowing you to adjust the tonal

characteristic of the signal. You can independently adjust the bass and treble frequencies on

each channel. The channel’s frequency response is flat when the knobs are in the 12 o’clock

position.

13. If you find the audio too muddy, you may want to reduce the LF (low

frequency) control.

14. If you find that the audio sounds dull, you can increase the HF (high

frequency) control. There is no right or wrong way to EQ a sound. You

should listen to how the mix sounds in the room and fine-tune to your

liking.

Andere Handbücher für Expedition XP300

Inhaltsverzeichnis

Sprachen:

Andere Samson Sprecher Handbücher

Samson

Samson auro D15 Bedienungsanleitung

Samson

Samson RSX110 Bedienungsanleitung

Samson

Samson Auro D208 Bedienungsanleitung

Samson

Samson Expedition XP310w Bedienungsanleitung

Samson

Samson StudioDock 3i Bedienungsanleitung

Samson

Samson Expedition Express Bedienungsanleitung

Samson

Samson Resolv 50a Bedienungsanleitung

Samson

Samson 215XL Bedienungsanleitung

Samson

Samson EXPEDITION XP510 Bedienungsanleitung

Samson

Samson XP308i Bedienungsanleitung

Samson

Samson RS Series Bedienungsanleitung

Samson

Samson Studio GT Bedienungsanleitung

Samson

Samson Resolv 50a Bedienungsanleitung

Samson

Samson Resound RS12M Bedienungsanleitung

Samson

Samson Expedition XP106 Bedienungsanleitung

Samson

Samson Resolv 65 Bedienungsanleitung

Samson

Samson MEDIAONE BT Bedienungsanleitung

Samson

Samson STUDIODOCK 4i Bedienungsanleitung

Samson

Samson dB500 Bedienungsanleitung

Samson

Samson Expedition XP300 Bedienungsanleitung

Samson

Samson RESOLV SE5 Bedienungsanleitung

Samson

Samson Expedition Express Bedienungsanleitung

Samson

Samson EXPEDITION XP312w Bedienungsanleitung

Samson

Samson dB300 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung