Samsung HF4000 Bedienungsanleitung

BluetoothCAR

HANDSFREE

HF4000

Draft

2010-08-13

Please read this manual before operating your device, and keep it for furthure reference.

Images used in this user manual may differ in appearance from the actual product.

Please read all Safety precautions before using your device to ensure safe and proper use.

Safety precautions

※

When using your device while driving, follow local regulations in the region you are

in.

※

Never disassemble or modify your device for any reason. Doing this may cause the

device to malfunction or become combustible. Bring the device to an authorized

service center to repair it.

※

Keep your device and all accessories out of the reach of small children or animals.

Small parts may cause choking or serious injury if swallowed.

※

Avoid exposing your device to very cold or very hot temperatures (below 0° C or

above 45° C). Extreme temperatures can cause the deformation of the device and

reduce the charging capacity and life of your device.

※

Do not allow your device to get wet — liquids can cause serious damage. Do not

handle your device with wet hands. Water damage to your device can void your

manufacturer’s warranty.

※

Avoid using your device’s light close to the eyes of children or animals.

Getting started

Charging the hands-free car kit

This hands-free car kit has a rechargeable internal battery which is non-

removable. Ensure that you fully charge the battery before using the hands-free

car kit for the first time.

1 Plug the small end of the cigar lighter adapter into the adapter jack.

2 Plug the large end of the cigar lighter adapter into the accessory outlet in your

vehicle.

3 When the hands-free car kit is fully charged, the charging icon is no longer

moving. Unplug the cigar lighter adapter from hands-free car kit.

You can also use the travel adapter to charge the hands-free car kit.

Use only a Samsung-approved charger. Unauthorized chargers may

cause an explosion or damage to the hands-free car kit.

The battery will gradually wear out while charging or discharging

because it is a consumable part.

When the battery charge gets low

The hands-free car kit beeps and the battery icon is blinking. Recharge the battery.

If the hands-free car kit powers off during a call, the call will be automatically

transferred to the phone.

Mount the hands-free car kit in your vehicle

Slide the hands-free car kit onto a sun visor in your vehicle .

Using your hands-free car kit

This section explains how to turn the hands-free car kit on, pair and connect to the

phone, and use various functions.

Activated functions and features may differ depending on the types of your

phone.

Some devices, especially those that are not tested or approved by

Bluetooth SIG, may be incompatible with your hands-free car kit.

Turning the hands-free car kit on or off

To turn the hands-free car kit on, slide the Power switch left. The hands-free car

kit beeps and the display is on.

To turn the hands-free car kit off, slide the Power switch right. The hands-free car

kit beeps and the display is off.

Turning the driving mode on or off

In Pairing mode, press and hold the voice button for 4 seconds.

You can also use the voice command "Driving Mode Setting."

When the driving mode is on, you will hear "Driving mode is on."

Using the voice command

You can control your hands-free car kit using your voice. Your hands-free car kit

can recognize only English commands.

1 Press the Voice button to activate the voice command

To use the voice command feature, ensure that the voice prompt is on.

2 Wait for the hands-free car kit ask you to “Say a command.”

If you don’t say any command for 5 seconds, you will hear, “Cancelled.” To

reactivate the voice command, press the Voice button.

3 Say one of the following commands loudly and clearly.

Command Action

“Driving Mode Setting” Check the status of Driving mode, and ask to

change on or off. Say “Yes” or “No” to

change the mode.

“Pair Active” Enter the Active pairing mode

“Pair Normal” Enter the Normal pairing mode

“Connection Status” Find out if the hands-free car kit is connected

to the device or not.

“Redial” Redial the last number you called on the

currently connected primary phone.

“Redial Two” Redial the last number you called on the

currently connected secondary phone.

“Call 1”, “Call2” or “Call 3” Call the corresponding speed dial number

stored on your phone.

'"Missed call back"

Call the latest missed call stored on your phone.

"Incoming call back"

Call the latest incoming call stored on your phone.

"Outgoing call back"

Call the latest outgoing call stored on your phone.

“Multi Point Setting” Check the status of Multi-Point mode, and

turn it on or off. Say “Yes” or “No” to change

the mode.

“Check Battery” Check the battery level on the hands-free car

kit and the currently connected phone.

“Phone Voice Command” Access your phone’s voice dialing feature, if

it has one.

“Phone Voice Command

Two” Access the secondary connected phone’s

voice dialing feature, if it has one.

“Command List ” List of Voice Commands.

“Voice Prompt”

Check the status of Voice prompt.

Say “Yes“ or

“No“ to change the mode.

Your hands-free car kit may not recognize voice commands if you speak

softly or unclearly.

Your hands-free car kit may inadvertently recognize voice commands

from background sounds that are louder than your voice.

Using the voice prompt

The voice prompt will inform you about the current status of the hands-free car kit

and usage instructions. The voice prompt is available in English only.

Turning the voice prompt on or off

To turn the voice prompt on

In Pairing mode, press and hold the Volume up button for 4 seconds. You will

hear “Voice prompt is on” from your hands-free car kit.

To turn the voice prompt off

In Pairing mode, press and hold the Volume down button for 4 seconds. You will

hear “Voice prompt is on” from your hands-free car kit.

The following voice prompts are available according to the status:

Status Voice prompt

When you enter Pairing mode “Ready to pair. Search for the

hands-free car kit from the

Bluetooth menu. Enter 0000 if

prompted for a PIN”

When you enter Active pairing mode “Active pairing mode”

When Active pairing failes “Active pairing failed”

When you connect the hands-free car kit to

a phone (when Multi-point mode is off) “Device is connected”

When you connect the hands-free car kit to “Primary device is connected” or

a phone (when Multi-point mode is on) “Secondary device is connected”

When you connect the hands-free car kit to

a music device “Music device is connected”

When a call comes in “Call from [phone number]. Say

answer or ignore”

Pairing and connecting the hands-free car kit

Pairing will create a unique and encrypted wireless link between two Bluetooth-

enabled devices, such as a Bluetooth phone and your Bluetooth hands-free car kit.

To use the hands-free car kit with other Bluetooth devices, the devices must be

paired. When trying to pair the two devices, keep the hands-free car kit and the

phone reasonably close together. After pairing, you can connect the two devices.

Pairing and connecting the hands-free car kit with a phone

1 Enter Pairing mode.

- With the hands-free turned on, press and hold the Talk button for 4

seconds. You will hear “Ready to pair.”

- You can also use the Voice command “Pair Normal.”

- If you turn on the hands-free car kit for the first time, it proceeds into

Pairing mode immediately.

2 Activate the Bluetooth feature on your phone and search for the hands-free car

kit (see your phone’s user manual).

3 Select the hands-free car kit from the list of devices found by your phone.

4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the hands-free car

kit to your phone.

Your hands-free car kit supports the Simple Pairing feature which allows

the hands-free car kit to be paired with a phone without requesting a

PIN. This feature is available for phones that are compliant with

Bluetooth version 2.1 or higher.

Turning the Multi-point mode on or off

To turn the Multi-point mode on

In Pairing mode, press and hold the Volume up button. You will hear “Multi-point

mode is on”. You can also use the Voice command “Multi Point Setting.”

To turn the Multi-point mode off

In Pairing mode, press and hold the Volume down button. You will hear “Multi-

point mode is off.” You can also use the Voice command “Multi Point Setting.”

Inhaltsverzeichnis

Andere Samsung Autozubehör Handbücher

Samsung

Samsung HF1000 Bedienungsanleitung

Samsung

Samsung HF1000 Bedienungsanleitung

Samsung

Samsung EP-H5300 Bedienungsanleitung

Samsung

Samsung EB-HN910I Bedienungsanleitung

Samsung

Samsung WEP850 Bedienungsanleitung

Samsung

Samsung HKT100BDE Bedienungsanleitung

Samsung

Samsung SCH-I300 Bedienungsanleitung

Samsung

Samsung HF1000 Bedienungsanleitung

Samsung

Samsung HKT600 Bedienungsanleitung

Samsung

Samsung WEP750 Bedienungsanleitung

Samsung

Samsung HF1000 Bedienungsanleitung

Samsung

Samsung HF1000 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung