Samsung Function controller Bedienungsanleitung

Function Controller

OWNER’S

INSTRUCTIONS

EDB98-04188A(1)

System Air Conditioner

Safety Precautions

◆Do not attempt to install or repair this function

controller by yourself.

◆This function controller contains no user-serviceable

parts. Always consult authorized service personnel

for repairs.

◆When moving, consult authorized service personnel

for disconnection and installation of the function

controller.

◆Ensure that the wall is strong enough to support the

weight of the function controller.

◆Must install the function controller with rated power

supply.

◆In the event of a malfunction (burning smell, etc.),

immediately stop operation, turn off the electrical

breaker, and consult authorized service personnel.

WARNING

CAUTION ◆

Do not use inflammable gases near the function

controller.

◆

Do not spill water into the function controller.

◆

Do not operate the function controller with wet hands.

◆

Do not install the function controller in a location

where it will come into contact with the combustible

gases, machine oil, sulphide gas, etc.

◆

Do not press buttons with a pointed thing.

◆

Do not pull or bend the function controller cable

excessively.

◆

Do not use this function controller for other purpose.

◆

Do not spray an insecticide or other combustible

things on the function controller.

◆

Do not clean the function controller with benzene,

solvents or other chemicals.

◆

Do not give a shock to the function controller or

disassemble it by yourself.

E-2

●

Before using the function controller, read carefully this instructions.

●

After reading the instructions, keep this owner's instructions and the

installation manual in a handy and safe place. If a user is changed, you must

hand over the manuals.

●

Never attempt to install the air conditioning system or to move the function

controller by yourself.

E-3

Contents

◆

IEW OF THE

UNCTION

ONTROLLER

◆

ETTING

TART

◆

ELECTING THE

NDOOR

NIT

◆

ELECTING THE

UTOMATIC

PERATING

ODE

◆

OOLING

OUR

OOM

◆

EATING

OUR

OOM

◆

EMOVING

XCESS

UMIDITY

◆

IRING

OUR

OOM

◆

DJUSTING THE

LOW

IRECTION

ASSETTE

YPE

NLY

)

E-4

View of the Function Controller

The function controller is an additional controller which is used with the centralized controller.

◆Test button is for your installation specialist. You must NOT press it.

Mode selection button

Communication error indicator

Room number display

Test indicator

Indoor unit selection button

Test button Filter Reset button

Swing button

Temperature adjustment

buttons

Removing frost indicator

Temperature setting

Fan speed

Air flow direction

Filter Sign indicator

On/Off & Timer

Set/Cancel button

Fan speed adjustment

button

On/Off indicator

Operating mode

Centralized controller indicator

etting Start

You have just purchased a function controller and it has

been installed by your installation specialist.

Your Owner’s Instructions contain much valuable information on

using your function controller. Please take the time to read them as

they will help you take full advantage of the unit’s features.

In the main part of the document, you will find a series of step-by-step

procedures for each function available.

The illustrations in the step-by-step procedures use three different

symbols:

PRESS PUSH HOLD DOWN

E-5

Select an indoor unit you want to control by pressing

button.

Result: :◆Each time you press button, the room

number is increased by 1, and each time you

press button, the room number is

decreased by 1 from 0~15.

Turn the air conditioner by pressing (ON/OFF)

button.

Result: ◆The On/Off indicator on the function controller

comes on.

◆The air conditioner runs in the mode selected

when the unit was last used.

◆For further details on operating modes,

refer to page 7~15.

Select an appropriate operating mode by pressing

Mode button.

Result: ◆The air conditioner runs in the selected mode.

Selecting the Indoor Unit

E-6

You can control a specific indoor unit from the function controller.

E-7

Selecting the Automatic Operating Mode

If necessary, press (ON/OFF) button.

Result: :◆The On/Off indicator on the function

controller comes on.

◆The air conditioner runs in the mode

selected when the unit was last used.

In the Automatic mode, the room temperature and the

fan speed are controlled automatically.

To select the AUTO mode, press the Mode button until

is displayed at the top of the function controller.

Result: :◆The air conditioner runs in AUTO mode.

The air conditioner is fitted with a

protection mechanism to prevent the unit

from being damaged when it is started

immediately after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

IMPORTANT

◆You can change modes at any time.

To adjust the temperature, press the Temperature buttons

one or more times until the required temperature is

displayed. Possible temperatures are between 18ºC and

30ºC inclusive.

Result: ◆Each time you press Temperature buttons:

- The temperature is adjusted by 1ºC.

◆The air conditioner starts cooling, provided

that the room temperature is than the

selected temperature.

- The quantity of air is adjusted automatically.

E-8

Cooling Your Room

If necessary, press (ON/OFF) button.

Result: :◆The On/Off indicator on the function

controller comes on.

◆The air conditioner runs in the mode

selected when the unit was last used.

You must select the COOL mode if you wish to adjust the :

◆Cooling temperature

◆Fan speed when cooling

To select the COOL mode, press the Mode button until

is displayed at the top of the function controller.

Result: :◆

The air conditioner runs in COOL mode.

The air conditioner is fitted with a protection

mechanism to prevent the unit from being

damaged when it is started immediately

after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

IMPORTANT

◆You can change modes at any time.

E-9

To adjust the temperature, press the Temperature buttons

one or more times until the required temperature is

displayed. Possible temperatures are between 18ºC and

30ºC inclusive.

Result: ◆Each time you press Temperature buttons:

- The temperature is adjusted by 1ºC.

◆The air conditioner starts cooling, provided

that the room temperature is higher than the

selected temperature ; the fan will, however,

operate.

Select the fan speed by pressing the Fan button one or

more times until the intended value is displayed :

To control the direction of the air flow, refer to page 15.

Automatic(rotated : ➔➔ )

Low

Medium

High

E-10

Heating Your Room

If necessary, press (ON/OFF) button.

Result: :◆The On/Off indicator on the function

controller comes on.

◆The air conditioner runs in the mode

selected when the unit was last used.

You must select the HEAT mode if you wish to adjust the :

◆Heating temperature

◆Fan speed when heating

To select the HEAT mode, press the Mode button until

is displayed at the top of the function controller.

Result: :◆

The air conditioner runs in HEAT mode.

The air conditioner is fitted with a protection

mechanism to prevent the unit from being

damaged when it is started immediately

after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

IMPORTANT

◆You can change modes at any time.

Inhaltsverzeichnis

Andere Samsung Controller Handbücher

Samsung

Samsung MOS-C1 Bedienungsanleitung

Samsung

Samsung MCM-A200 User Manual (XP) Bedienungsanleitung

Samsung

Samsung SCC-101 Bedienungsanleitung

Samsung

Samsung SPC-2000 Bedienungsanleitung

Samsung

Samsung RS232C Bedienungsanleitung

Samsung

Samsung HARMAN AMX MU Series Bedienungsanleitung

Samsung

Samsung SCC-3100 Bedienungsanleitung

Samsung

Samsung SSC-1000 Bedienungsanleitung

Samsung

Samsung SPC-1010 Bedienungsanleitung

Samsung

Samsung MCM-A202DN Bedienungsanleitung

Samsung

Samsung SPC-2010 Bedienungsanleitung

Samsung

Samsung SCC-3100A Bedienungsanleitung

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung SM-Z300H/DD Bedienungsanleitung

Samsung

Samsung RMC30D1 Bedienungsanleitung

Samsung

Samsung MCM-A100 Bedienungsanleitung

Samsung

Samsung MCM-C210 Bedienungsanleitung

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung DMS2.5 Bedienungsanleitung

Samsung

Samsung SPC-7000 Bedienungsanleitung

Samsung

Samsung MIM-H02 Leitfaden

Samsung

Samsung MCM-A100 Bedienungsanleitung

Samsung

Samsung SSA-S2101 Bedienungsanleitung

Samsung

Samsung MWR-WG00JN Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung