Samsung SCC-3000 Bedienungsanleitung

Thank you for buying a Samsung SYSTEM CONTROLLER.

This manual will guide you through using the SYSTEM CONTROLLER. Please read this manual carefully

before using the SYSTEM CONTROLLER.

《2》

Contents

●Important Safety Instructions 3

●Major Functions and Features

(1) Overview 5

(2) Features 5

●Product Components 5

●System Overview 6

●Names and Functions of Each Part

(1) Camera Setup Section 7

(2) Number Pad 8

(3) External Device Selectors 8

(4) Universal Controller 9

(5) DVR Controller 9

(6) Camera Controller 11

(7) Junction Box 11

●Before Operation

(1) Power-On 12

(2) Initial Screen Display 12

(3) Camera ID Setup 12

(4) Joystick/Camera Control Button 13

(5) Camera Movement Speed Control 14

(6) Camera Zoom Control 14

(7) Camera Focus Control 14

●PTZ Mode

(1) PTZ Setup Mode 15

(2) PRESET 16

(2-1) PRESET Setup 16

(2-2) PRESET Movement 16

(3) SWING 17

(3-1) SWING Setup 17

(3-2) SWING Operation 17

(4) GROUP 18

(4-1) GROUP Setup 18

(4-2) GROUP Operation 18

(5) TOUR 19

(5-1) TOUR Setup 19

(5-2) TOUR Operation 19

(6) MODEL 21

(7) TRACE 22

(7-1) TRACE Memory 22

(7-2) TRACE Operation 23

(8) AF 23

(9) OSD 24

●DVR Mode 25

●Controller Mode

(1) Controller Setup Mode 26

(2) Controller ID Setup 27

(3) SERIAL Setup 27

(4) DATA COPY 28

(5) RESPONSE 29

(6) PASSWORD 31

(6-1) PASSWORD Setup 31

(6-2) Applying Password-Setup Mode 32

(6-3) Applying Password-Power 32

(6-4) Entering Password 32

(7) PRIORITY 33

(8) DEFAULT 34

●REFERENCE

(1) Swing, Group Movement Speed 35

(2) System Connections 36

(2-1) Connecting Controller and Junction Box 36

(2-2) Connecting Junction Box and

External Devices 36

(3) RS-485/422 Pin Layout (D_SUB_FEMALE) ........37

(4) RS-232C Pin Layout (D_SUB_MALE) 37

(5) Controller Specifications 38

(6) RS-485/422 Specifications 38

(7) Junction Box DIP Switch 38

《3》

Important Safety Instructions

■

All work related to the installation of this appliance must be performed by qualified service personnel or system installers.

- If the product is connected or installed improperly, electric shock, fire, severe injury, and/or damage can result.

■Please install the product on a completely flat floor.

- Always check the strength and stability of the installation location.

- Do not drop the appliance on the floor. This may result in damage or injury.

■Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers.

- There are no user-serviceable parts inside. Contact qualified service personnel for maintenance.

■Never use the appliance in places where there are flammable materials.

- Never use the appliance in places where flammable materials such as gas are used.

This may result in fire, explosion, and other serious accidents.

■Never touch un-insulated parts with wet hands.

- Touching un-insulated parts with wet hands may result in serious electric shock.

■Never expose the appliance to water or moisture.

- If the appliance gets wet, immediately turn the power off.

- Stop using the appliance if it gets wet. Contact the manufacturer immediately.

■Stop using the appliance if there appears to be any operational problem.

- Immediately turn the power off to the appliance if there is any abnormal condition such as smoke or unusual smells.

- Continuing to use the appliance under abnormal conditions may result in serious damage.

■Always use the recommended power.

- Using incorrect power source ratings may result in fire, electric shock, or damage.

■Always handle the connection cable with care.

- Never damage or modify the connection cable.

- Do not pull, expose to heat, or place heavy objects on the connection cable.

- Non-observance of these warnings may result in fire, electric shock or damage.

Warning

■Use the appliance indoors only.

- Do not place the appliance outdoors or expose it to rain or moisture.

- If dropped in water, the appliance may be corroded and damaged.

■Do not use the appliance where there is excessive dust, smoke, or moisture.

- Using the appliance under such conditions may result in fire, electric shock or serious damage.

■Do not operate the appliance in temperatures beyond those specified.

- Excessive heat or cold may damage the appliance.

- Always operate the appliance within the recommended temperature range of 0˚C ~ 40˚C.

■Do not place the appliance in direct sunlight.

- This may discolor the appliance.

■Do not apply excessive shock to the appliance.

- Excessive shock may damage the appliance.

Caution

《4》

Important Safety Instructions

■If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.

- Do not use chemical agents such as alcohol or benzene.

■For detailed information on upgrading the firmware, please direct your inquiries to the installation vendor.

Maintenance and Repair

This equipment has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in a commercial

environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not

installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area

is likely to cause harmful interference, in which

case the user will be required to correct the

interference at his own expense.

Refer all work related to the installation of this

appliance to qualified service personnel or

system installers.

《5》

Major Functions and Features

(1) Overview

This product is designed for use only with the Speed Dome camera, CCTV receiver, and Samsung Digital Video Recorder.

●Speed Dome camera : Samsung Techwin (SPD-1600/2200/2500), PELCO-D, PANASONIC (WV-CS854A),

SAMSUNG ELECTRONICS (SCC-643-641)

●CCTV Receiver : SRX-100B

●DVR : Samsung Techwin (SVR-1630/1620/430)

(2) Features

- It is possible to totally control the 255 Speed Dome camera, CCTV Receiver and Samsung Digital Video Recorder.

- If the Speed Dome is set to one-way reception (RESPONSE OFF), it is possible to connect a maximum of 16 sub-

controllers, including the master controller.

- If the Speed Dome is set to two-way reception (RESPONSE ON), it is possible to connect a maximum of 12 sub-

controllers, including the master controller.

- Camera control with the joystick, zoom buttons, and focus buttons

- Easy camera preset location setup and movement

- Camera control without an operator through automatic operation mode

※Different surveillance cameras may have different names for the same functions, depending on the

manufacturer.Some functions may not be available for certain models.

※If the Speed Dome (SPD-1600/2200/2500) DIP switch is set to one-way reception, each sub-controller can be

controlled independently. If it is set to two-way reception, sub-controllers cannot be controlled independently.

※The SPD-1600/2500 is set to two-way reception and the SPD-2200 is set to one-way reception by factory default.

※Sub-controllers cannot be controlled if the master controller is in use.

●SCC-3000 Controller ●Junction Box

●Controller Connection Cable

Product Components

●Power Adaptor (DC 12V) ●User's Manual

《6》

System Overview

※Please refer to page 39 for the detailed connection map of the JUNCTION Box, Controllers and external devices.

(1) General Connection

Controller Connection Cable

: RS-485/422

: Video Cable

DVR

Dome Camera + DVR: 255 max.

Dome Camera

SVR-1630: 255 max.

CCD Camera

Remarks

Junction Box

《7》

Names and Functions of Each Part

(1) Camera Setup Section

①RESET : Resets camera power.

②PRESET : Moves camera to the preset location (see p.16).

③LIGHT : Toggles the lights around the camera on and off.

④AUX : Toggles the camera’s external case AUX on and off.

⑤TOUR :

Sets more than 1 group for tour and performs continuous group action (see p.19).

⑥SALVO : Not used; will be applied to F/W in the future.

⑦SWING : Continuously travels between two assigned locations horizontally (pan) or

vertically (tilt) (see p.17).

⑧GROUP : Repeats sequential surveillance of assigned preset locations with preset

movement rates and intervals (see p.18).

⑨AF : Sets the focus to automatic or manual after operating the camera (see p.23).

⑩OSD : Displays the camera OSD menu (see p. 24).

⑪FUNCTION : Used to perform 2 functions or more at the same time (see p.8).

※Some buttons in the camera setup section may not be supported or may be used differently depending on the

camera manufacturer. Please refer to the table below for the buttons supported by the major camera manufacturers.

SPD-1600 SPD-2200 SPD-2500 PELCO-D PANASONIC

(WV-CS854A)

SAMSUNG ELECTRONICS

(SCC-643/641)

Not used; will be applied to F/W in the future.

O(AUTO-PAN)

RESET O O O O O X

PRESET O O O O O O

TOUR O O O X X X

SALVO

SWING O O O X

GROUP O O O X O (AUTO-SEQ) O (SCAN)

AF O O O O O O

OSD O O O O O O

LIGHT Applies only to systems with housing and receivers that support the light function. (SRX-100B only)

AUX Applies only to systems with AUX terminals. (SRX-100B only)

《8》

Names and Functions of Each Part

(2) Number Pad

※'F' in the table below refers to the Function button.

①0 ~ 9 : Used for entering camera ID, channel number, monitor number, DVR ID, etc.

(see p.23).

②F + 0 : Activates the system setup menu (see p.24).

③▲/ ▼: Used for increasing or decreasing menu values in detailed setup menus.

※When using functions that are performed by a combination of the function button and

numeric keys, the setup may be different depending on the camera manufacturer.

Please refer to the table below for the setup for major camera manufacturers.

(3) External Device Selectors

①PTZ : Selects the PTZ mode (see p.15~24).

②DVR : Selects the DVR mode (see p.25).

③CAMERA : Enter camera number and press the CAMERA button to set the camera ID (PTZ mode) or set the channel

(DVR mode).

④MONITOR : Not used; will be applied to F/W in the future).

SPD-1600 SPD-2200 SPD-2500 PELCO-D PANASONIC

(WV-CS854A)

SAMSUNG ELECTRONICS

(SCC-643/641)

TRACE RUNF+1 TRACE RUN TRACE RUN TRACE RUN

(PATTERN)

TRACE RUN

(PATTERN)

TRACE RUN

(PATTERN 1)

TRACE

MEMORY

F+2 TRACE

MEMORY

TRACE

MEMORY - F2(SPECIAL 2) TRACE RUN

(PATTERN 2)

TRACE

MEMORY STOP

F+3

TRACE

MEMORY STOP

TRACE

MEMORY STOP

- F3

TRACE RUN

(PATTERN 3)

F+4 AUTO

POWER ON

AUTO

POWER ON

AUTO

POWER ON - AUTO-SORT -

F+5 AUTO

POWER OFF

AUTO

POWER OFF

AUTO

POWER OFF - - -

※Use the AUTO POWER ON setting to allow the camera to resume the tasks in its memory upon power supply, even if

they were previously aborted as a result of power failure, etc.

《9》

Names and Functions of Each Part

(4) Universal Controller

①ZOOM W/T : Performs camera zoom action (wide and telephoto).

②FOCUS -/+ : Used for manual focus adjustment.

③|| : Used for moving the menu cursor up (when menu is active), pausing DVR

playback, or playing stills.

④■: Used for moving the menu cursor down (when menu is active) or stopping

DVR playback.

⑤I▶:

Used for moving the menu cursor left (when menu is active) or Slow Playback.

⑥▶▶:

Used for moving the menu cursor right (when menu is active) or Fast Playback

⑦▶: Used for playing recorded video.

⑧REC / ESC : Used for starting surveillance screen recording, canceling entered

values, or moving to the previous stage.

⑨

ENTER / DIR : Used for executing the entered values, performing setups (PTZ mode

and DVR mode), or playing recorded video in the reverse direction.

(5) DVR Controller

※Please refer to the DVR product manual for the buttons without reference pages.

Some functions may not be supported by certain models.

①QUICK SET : The Quick Setup menu is displayed in the DVR monitor.

②STATUS : The current DVR status is displayed in the DVR monitor.

③SEARCH : Used for searching the DVR recording list.

④PLAY MODE : Used for recording and playing the DVR with the controller.

(SVR-900/1620 only)

⑤MENU : The DVR menu is displayed in the DVR monitor.

⑥MULTI : Used for switching the DVR monitor from single screen playback mode

to multiple screen playback mode.

⑦AUTO : displays the sequence of cameras connected to the DVR on the monitor.

⑧ALRAM RESET : Used for resetting the alarm and event display, turning the relay

on and off, and closing the event notification window.

⑨LIST : Shows the event list saved in the DVR storage device.

⑩PIP : Used for performing the PIP (Picture In Picture) function.

⑪DIGITAL ZOOM : Used for zooming in the monitor screen when in single screen

playback mode.

⑫FREEZE : Used for pausing the video when displaying a surveillance video.

⑬SPOT : Used to switch to spot monitor.

⑭COPY : Used for copying, backing up, or deleting saved video.

⑮LIVE / PLAY BACK :

Used for toggling the surveillance screen and playback screen.

⑯RELAY : Used for manual control of replay output.

●It is possible to use all the functions except menu cursor movement of ③~ ⑨buttons in only PLAY MODE for

SVR-900/1620. When the user presses the PLAY MODE button of the controller, PLAY MODE is on.

When PLAY MODE is on, [P-MODE] appears on the LCD monitor. Press the PLAY MODE button once again

to release PLAY MODE.

INFORMATION

《10》

Names and Functions of Each Part

※Some DVR controller buttons may not be supported or may be used differently than as described in this manual,

depending on the DVR model. Please refer to the table below for the buttons supported by major DVR model

manufacturers. The DVR button with multiple functions works in the same way on the controller.

SVR-430 SVR-900 SVR-1620 SVR-1630

QUICK SET O - - -

STATUS O O O -

SEARCH O O O O

PLAY MODE - O O -

FOCUS - O O O O

FOCUS + O O O -

MENU O O O O

MULTI O O O O

AUTO O O O O

ALARM RESET O O O O

LIST - O O -

PIP O O O -

DIGITAL ZOOM O O O O

FREEZE - O O -

SPOT - O O O (A/B)

COPY O O O O

LIVE/PLAY BACK O Screen Selection Screen Selection -

RELAY - - - O

-/+ O O O -

II OO

Jog(PLAY MODE)

Jog

▶▶ O

Fast Forwarding

(PLAY MODE)

Fast Forwarding

(PLAY MODE)

■O

Pause

(PLAY MODE)

Pause

(PLAY MODE)

I▶Jog

Slow Playback

(PLAY MODE)

Slow Playback

(PLAY MODE)

ENTER / DIR O

Direction Switching

(PLAY MODE)

Direction Switching

(PLAY MODE)

REC / ESC

Record function for

Surveillance (LIVE)

screen

Record function for

Surveillance (LIVE)

screen

Record function for

Surveillance (LIVE)

screen

Record function for

Surveillance (LIVE)

screen

Inhaltsverzeichnis

Andere Samsung Controller Handbücher

Samsung

Samsung SSA-S2101 Bedienungsanleitung

Samsung

Samsung MIM-E03 series Bedienungsanleitung

Samsung

Samsung ET-YO324 Bedienungsanleitung

Samsung

Samsung SM-N9109W Bedienungsanleitung

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung Function controller Bedienungsanleitung

Samsung

Samsung AC0 JNHDCH/AA Series Service-Handbuch

Samsung

Samsung SCC-1000 Bedienungsanleitung

Samsung

Samsung SPC-7000 Bedienungsanleitung

Samsung

Samsung MCM-A200 User Manual (XP) Bedienungsanleitung

Samsung

Samsung RS232C Bedienungsanleitung

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung SPC-1010 Bedienungsanleitung

Samsung

Samsung SM-Z300H/DD Bedienungsanleitung

Samsung

Samsung MWR-WE13N Bedienungsanleitung

Samsung

Samsung MWR-WG00JN Bedienungsanleitung

Samsung

Samsung 136S Bedienungsanleitung

Samsung

Samsung SSC-1000 Bedienungsanleitung

Samsung

Samsung MCM-A00N Bedienungsanleitung

Samsung

Samsung MWR-WG00JN Bedienungsanleitung

Samsung

Samsung MCM-C210 Bedienungsanleitung

Samsung

Samsung SPC-2000 Bedienungsanleitung

Samsung

Samsung MCM-A202DN Bedienungsanleitung

Samsung

Samsung MOS-C1 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch