Samsung SPC-2000 Bedienungsanleitung

Before installing and operating this product,

please read this manual thoroughly.

Network Controller SPC-2000

User Guide

ENGLISH

Network Controller User Guide

License Agreement

Limited Liability

Warranty

Standards-Compliance Notice

All copying, reprinting, and translating to other languages of part of or all of its contents without the permission of

Samsung Techwin Co., Ltd. are expressly prohibited.

Samsung Techwin Co., Ltd. reserves all copyright of this user’s manual.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures: ·

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION : Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operated the equipment.

- This product is support equipment for surveillance system. Therefore, we can't compensate for material loss

and/or personal injuries by robbery, fire, natural disaster or other such events.

- The specification for this product may change without prior notice for product improvement.

Samsung Techwin cares for the environment at all product manufacturing stages to preserve

the environment, and is taking a number of steps to provide customers with more

environment-friendly products. The Eco mark represents Samsung Techwin's will to create

environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.

Samsung Techwin is not responsible for any issues related to buying and selling this product, nor promoting

specific dealers or agencies.

The product warranty does not cover the following cases:

• Product damage or malfunction caused by improper handling and/or use of the product by user.

• Damage caused by disassembly and/or alteration by the user.

• Damage caused by connecting a power supply with incorrect specifications.

• Product damage or malfunctions caused by natural disasters (fire, flood, tsunami, etc.).

• Product damage caused by using expendable parts from an unauthorized third party.

Warranty is provided only upon purchasing the product. During the warranty period, a service fee will be charged

for repair and/or inspection for the product for any problems that are not covered by the warranty. After the

warranty expires, a service fee will be charged for repair and/or inspection for the product for all problems.

Network Controller User Guide

Cautions Before Use

■

Please contact your vendor for product installation.



- Improper connection and/or installation of the product may cause electric shock, fire, severe

injuries, and damage to property.

■

Please install the product on stable, level ground.



- Always test and verify the durability and stability of the installation location.

- Dropping the product from heights may cause product malfunction and/or cause injuries.

■

Do not disassemble or attempt to repair without consulting a professional technician.



- Neglecting this warning may cause electric shock, fire, and/or product malfunction.

■

Do not operate this product in places that are exposed to inflammable substances.



- Avoid gas and other inflammable substances that may cause fire, explosion, and other

serious accidents.

■

Do not touch the power plug with wet hands.



- It may cause electric shock and possibly death.

■

Do not soak the product with water.



- If soaked, turn off the product immediately.

- If soaked, stop using the product and contact us as soon as possible.

■

Stop using the product if you detect unusual problems.



- If you detect smoke or a burning odor from the product, turn off the product immediately.

- Using the product while having these problems may cause severe hardware and software

damage.

■

Use only the specified voltage and current.



Connecting the product to improper voltage and current may have risks of fire, electric shock,

and/or hardware and software damage.

■

Handle the power cord with care.



- Do not damage or modify the power cord.

- Do not pull the cord, expose it to excessive heat, or place heavy objects on it.

- Neglecting this warning may cause fire, electric shock, and/or damage to the product.

■

This product is designed to be used indoors.



- Do not expose it to outdoor weather conditions, water, or high humidity.

- Water leakage may cause corrosion and severe damage to the product.

■

Do not operate the product in places that are exposed to thick dust, smoke, or high humidity.



It may cause fire, electric shock, and/or severe damage to the product.

■

Do not operate this product at extreme temperatures.



- High and low temperatures may cause damage to the product.

- The product’s operating temperature is between 0° and 40°.

■

Do not expose the product to direct sunlight.



It may cause discoloration and damage to the product.

■

Do not subject the product to shock.



- It may cause damage to the product.

■

To clean the controller, turn off the power and use a soft cloth to wipe off dirt.



- Do not use alcohol, benzene, or other chemicals for cleaning.

Warning Caution

Maintenance Instructions

Cautions Before Use

Network Controller User Guide

Table of Contents

●License Agreement



●Limited Liability

 

●Product Warranty



●Standards-Compliance Notice



●Cautions Before Use



●Table of Contents

 

●Product Features

 

●Part Names & Functions

 

●Pan / Tilt / Zoom Using Joystick



●System Requirements



●Installing the Controller



●Calibrating the Controller



●Troubleshooting

 

●Product Specifications



●Product Design

 

●Product Warranty



Product Features

Part Names & Functions

The SPC-2000 consists of a 3-axis handle for PTZ operation and 12 buttons for custom

settings. The SPC-2000 helps you to control monitoring cameras more easily and accurately.

It supports USB connection for convenient use in a computer environment. Connect it to the

USB port on a computer that supports DirectX; you can use it immediately, without extra

software installation.

The SPC-2000 controller consists of a joystick and main unit. Pull the joystick left, right, up,

or down to control the Pan and Tilt operations. To zoom in or out on the screen, rotate it. 2

buttons are on the joystick, and the remaining 10 are on the main unit. You can configure the

buttons to perform functions in the pre-set settings.

Pic 1. SPC-2000

Network Controller User Guide

■



To pan your camera, pull the joystick left and right. To tilt, pull it up and down. The farther

you move the joystick from the center, the faster the camera moves. To zoom in and out

on the monitoring screen, rotate the joystick clockwise or counterclockwise.The more you

rotate the joystick, the faster the zoom speed is.

Pic 2. Pan & Tilt Control

Pic 3. Zoom Control

Pan / Tilt / Zoom Using Joystick

[ Zoom Wide Action ] [ Zoom Tele Action ]

System Requirements

Installing the Controller

- Windows 2000, Windows XP, Windows Vista, Windows 7

- Microsoft DirectX 7.0a or higher

- USB conversion software that detects the controller via DirectX

- 1 USB port

1. Turn on your computer, and then connect the controller to the USB port.

2. A window appears informing you that a new device has been detected.

3. Your computer detects the controller automatically.

(If necessary, install the controller following the instructions in the installation window.)

4. Once the controller is detected, its name displays under the Game Controllers list in

Control Panel.

[Start] [Settings] [Control Panel] [Game Controllers]

Pic 4. Control Panel

Network Controller User Guide

Pic 6. Controller Properties Window

Calibrating the Controller

For best results, all the axes of the controller must be calibrated.

1. Go to [Start]



[Settings]



[Control Panel]



[Game Controllers]



[Properties]



[Setup].

2. Press the [Calibrate] button to run the “Device Calibration Wizard.”

3. Calibrate the axes following the instructions on the screen.

Pic 5. Game Controllers Window

Installing the Controller

Calibrating the Controller

Pic 7. Device Calibration Wizard

Troubleshooting

If you experience any problem using the product, please check the following.

1. If the controller does not operate properly:

Go to [Start] [Control Panel] [Game Controllers], and then click the [Troubleshooting] button.

2. If your computer does not detect the controller:

· Check if the operating system supports DirectX.

· Check if the computer’s USB port is working properly.

3. If the controller buttons are hard to press:

· Check if there is anything blocking the buttons. Clean and remove any blockage.

4. If the joystick is hard to move:

· Check if there is anything blocking the bottom of the joystick. Clean and remove the blockage.

5. If the joystick moves uncontrollably:

· Run the "Device Calibration Wizard".

Network Controller User Guide

Model Name SPC-2000

Joystick

Axis Hall-effect 3 Axes

Button 12ea

Performance

Range of

Movement

X/Y-Axis ±18°

Z Axis ±40°

Center Single Spring, All Directions

Minimum Power 0.109 [N·m]

Operating Power 0.151 [N·m]

Maximum Power 0.169 [N·m]

Materials

Housing High Solidity ABS

Handle High Solidity Glass-Reinforced Nylon

Cover Thermoplastic Elastomer

Knob Stainless Steel

Interface

Port 4-pin USB Type A

Software

Drivers Standard DirectX Drivers (DirectInput)

Electric Features

Operating Voltage (DC 5 [V]), Vdd = 5 [V] (±0.5 [V]) via USB

Operating Current 32 [mA]

Operating Environment

Temperature -25

℃

to +70

℃

Miscellaneous

Power Cord Length 2 [m]

Size

Size 156 [

㎜

]

Length 169 [

㎜

]

Width: 126 [

㎜

]

Weight 440 [g]

Color Black

Product Specifications Product Design

Ø 1.39in

(35.31mm)

6.64in

(168.66mm)

3.11in

(78.99mm)

5.03in

(127.76mm)

1.92in

(48.77mm)

6.16in

(156.46mm)

Network Controller User Guide

MEMO

DECLARATION OF CONFORMITY

Application of Council Directive(s) 2004 / 108 / EC

Manufacturer's Name SAMSUNGTECHWIN CO., LTD.

Manufacturer's Address SAMSUNGTECHWIN CO., LTD.

42, SUNGJU-DONG CHANGWON-CITY,

KYUNGNAM, KOREA, 641-716

European Representative Name

European Representative Address

Equipment Type/Environment Network Controller

Model Name SPC-2000

Beginning Serial NO. C5A46V3Z200001X

Year of Manufacture 2010.04.01

Conformance to EN 55022 : 2006

EN 50130-4 : 2003

We, the undersigned, hereby declare that the equipment specified above conforms

to the above Directive(s).

Manufacturer SAMSUNG TECHWIN CO., LTD

Legal Representative in Europe

Signature Signature

Full Name BONJENG GU Full Name

Position QUALITY CONTROL MANAGER Position

Place CHANGWON, KOREA Place

Date 2010.02.01 Date

VAN 10. 03

•SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business

Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS

TEL : +44-1932-45-5300 FAX : +44-1932-45-5325

www.samsungtechwin.com

www.samsungsecurity.com

•SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400

TEL: +82-70-7147-8740~60 FAX: +82-31-8018-3745

•SAMSUNG TECHWIN AMERICA Inc.

1480 Charles Willard St, Carson, CA 90746, UNITED STATES

Tol Free : +1-877-213-1222 FAX : +1-310-632-2195

www.samsungcctvusa.com

SALES NETWORK

Inhaltsverzeichnis

Andere Samsung Controller Handbücher

Samsung

Samsung MCM-A100 Bedienungsanleitung

Samsung

Samsung HARMAN AMX MU Series Bedienungsanleitung

Samsung

Samsung MOS-C1 Bedienungsanleitung

Samsung

Samsung SSC-1000 Bedienungsanleitung

Samsung

Samsung MIM-E03 series Bedienungsanleitung

Samsung

Samsung SPC-2010 Bedienungsanleitung

Samsung

Samsung MCM-A00N Bedienungsanleitung

Samsung

Samsung AC0 JNHDCH/AA Series Service-Handbuch

Samsung

Samsung SPC-1010 Bedienungsanleitung

Samsung

Samsung ET-YO324 Bedienungsanleitung

Samsung

Samsung MCM-A202DN Bedienungsanleitung

Samsung

Samsung Function controller Bedienungsanleitung

Samsung

Samsung SCC-101 Bedienungsanleitung

Samsung

Samsung WEC8500 Bedienungsanleitung

Samsung

Samsung SM-Z300H/DD Bedienungsanleitung

Samsung

Samsung MCM-C210 Bedienungsanleitung

Samsung

Samsung SCC-3000 Bedienungsanleitung

Samsung

Samsung RMC30D1 Bedienungsanleitung

Samsung

Samsung SCC-3100 Bedienungsanleitung

Samsung

Samsung MWR-WG00JN Bedienungsanleitung

Samsung

Samsung SPC-7000 Bedienungsanleitung

Samsung

Samsung MWR-WE13N Bedienungsanleitung

Samsung

Samsung MIM-H02 Leitfaden

Samsung

Samsung RS232C Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch