Samsung LN40A630MF Bedienungsanleitung

English-1

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/global/register.

LN40A630M1F/LN46A630M1F/

LN52A630M1F

Rear Panel / Side Panel Jacks

1AUDIO OUT

2DIGITAL AUDIO OUT (OPTICAL)

3PC IN [PC] / [AUDIO]

4HDMI IN 1, 2, 3 / DVI IN (HDMI2)

[R-AUDIO-L]

5 ANT IN

6 WISELINK

7 AV IN 2, S-VIDEO

8 HEADPHONE

9POWER INPUT

0COMPONENT IN 1, 2 / AV IN 1

!EX-LINK

@KENSINGTON LOCK

Audio Output Performance Comparison

OPTICAL (Digital)

AUDIO (Analog)

Best

Normal

Video Input Performance Comparison

HDMI/DVI

PC/COMPONENT

S-VIDEO

VIDEO

Best

Better

Good

Normal

Quick Setup Guide

BN68-01670A-00Eng-0613.indd 1 2008-06-13 ¿ÀÈÄ 7:36:58

English-2

Remote Control

See “Remote Control” in the owner’s instructions for details.

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to change the channel.

Press to select additional

channels (digital and analog)

being broadcast by the same

station. For example, to select

channel “54-3”, press “54”, then

press “ ” and “3”.

(MUTE)

Press to temporarily cut off the

sound.

VOL – / VOL +

Press to increase or decrease

the volume.

CH LIST

Used to display Channel Lists

on the screen.

TOOLS

Use to quickly select frequently

used functions.

INFO

Press to display information on

the TV screen.

COLOR BUTTONS

Use these buttons in the

Channel list, WISELINK, etc.

Controls the caption decoder.

E.MODE

Press to select the preset

display and sound modes for

sports, cinema and games.

Use these buttons in the

DMA, WISELINK and Anynet+

modes.

( : This remote can be

used to control recording on

Samsung recorders with the

Anynet+feature)

ON/OFF

Press to backlight the buttons

on the remote. This function is

convenient for using at night or

when the room is dark. (Using

the remote control with the

ON/OFF light button set

to On will reduce the battery

usage time.)

PRE-CH

Tunes to the previous channel.

CH / CH

Press to change channels.

SOURCE

Press to display and select the

available video sources.

W.LINK (WISELINK)

This function enables you to

view and play photo and music

files from an external device.

(

Displays the main on-screen

menu.

)

RETURN

Returns to the previous menu.

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

Use to select on-screen menu

items and change menu

values.

EXIT

Press to exit the menu.

DMA (Digital Media Adapter)

Use this when connecting

a SAMSUNG DMA device

through an HDMI interface and

switching to DMA mode.

For more information on the

operating procedures, refer to

the user manual of the DMA.

This button is available when

“Anynet+(HDMI-CEC)” is “On”.

MTS

Press to choose stereo, mono

or Separate Audio Program

(SAP broadcast).

FAV.CH

Press to switch to your favorite

channels.

P.SIZE

Picture size selection.

BN68-01670A-00Eng-0613.indd 2 2008-06-13 ¿ÀÈÄ 7:36:58

English-3

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI

TV Rear Panel

DVI to HDMI Cable (Not supplied)

2Audio Cable (Not supplied)

Connect a DVI to HDMI Cable or

DVI-HDMI Adapter between the

HDMI IN 2 jack on the TV and the

DVI jack on the DVD Player or Cable

Box/Satellite receiver (Set-Top Box).

Connect Audio Cables between the

DVI IN (HDMI 2) [R-AUDIO-L] jack on

the TV and the DVD Player or Cable

Box/Satellite receiver (Set-Top Box).

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI

What is HDMI?

•

HDMI(High-Definition Multimedia

Interface), is an interface that enables the

transmission of digital audio and video

signals using a single cable.

•

The difference between HDMI and DVI

is that the HDMI device is smaller in

size and has the HDCP (High Bandwidth

Digital Copy Protection) coding feature

installed.

•

DVI also requires a separate audio

connection (see below).

Connect an HDMI Cable between

the HDMI IN (1, 2 or 3) jack on

the TV and the HDMI jack on the

DVD Player or Cable Box/Satellite

receiver (Set-Top Box).

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.

When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the

cable.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

➣

TV Rear Panel

TV Side Panel

HDMI Cable (Not supplied)

Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD players/Cable Boxes/Satellite

receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound,

connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of

the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI

version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

➣

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

BN68-01670A-00Eng-0613.indd 3 2008-06-13 ¿ÀÈÄ 7:36:59

English-4

Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)

via Component cables

TV Rear Panel

1Component Cable

(Not supplied)

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

2Audio Cable (Not supplied)

Connect a Component Cable between

the COMPONENT IN (1 or 2)

[Y, P

, P

] jacks on the TV and the

COMPONENT [Y, P

, P

] jacks on

the DVD Player or Cable Box/Satellite

receiver (Set-Top Box).

Connect Audio Cables between the

COMPONENT IN(1 or 2) [R-AUDIO-L]

jacks on the TV and the AUDIO OUT

jacks on the DVD Player or Cable Box/

Satellite receiver (Set-Top Box).

Component video separates the video

into Y (Luminance (brightness)), Pb

(Blue) and Pr (Red) for enhanced video

quality. Be sure to match the component

video and audio connections.

For example, if connecting a Component

video cable to COMPONENT IN 1,

connect the audio cable to

COMPONENT IN 1 also.

Each DVD Player or Cable Box/Satellite

receiver (Set-Top Box) has a different

back panel configuration.

When connecting a DVD Player or

Cable Box/Satellite receiver (Set-Top

Box), match the color of the connection

terminal to the cable.

➣

Connecting a Camcorder

Connect a Video Cable (or S-Video

Cable) between the AV IN2 [VIDEO]

(or S-VIDEO) jack on the TV and the

VIDEO OUT jack on the camcorder.

Connect Audio Cables between the

AV IN2 [R-AUDIO-L] jacks on the TV

and the AUDIO OUT jacks on the

camcorder.

Each Camcorder has a different back

panel configuration.

When connecting a Camcorder, match

the color of the connection terminal to

the cable.

➣

Camcoder 1

TV Side Panel

Audio cable

(Not supplied)

S-Video cable (Not supplied)

Audio cable (Not supplied)

BN68-01670A-00Eng-0613.indd 4 2008-06-13 ¿ÀÈÄ 7:37:00

English-5

Connecting a VCR

If you have a “mono” (non-stereo) VCR,

use a Y-connector (not supplied) to

connect to the right and left audio input

jacks of the TV. Alternatively, connect

the cable to the “R” jack. If your VCR is

stereo, you must connect two cables.

➣

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable

(Yellow).

➣

TV Rear Panel

3RF Cable

(Not supplied)

5Audio Cable

(Not supplied)

VCR Rear Panel

Video Cable

(Not supplied)

Connect the cable or antenna

to the ANT IN terminal on the

back of the VCR.

Connect an RF Cable between

the ANT OUT terminal on the

VCR and the ANT IN terminal

on the TV.

Connect a Video Cable

between the VIDEO OUT jack

on the VCR and the AV IN 1

[Y/VIDEO] or AV IN 2 [VIDEO]

jack on the TV.

Unplug the cable or antenna

from the back of the TV.

Connect Audio Cables between

the AUDIO OUT jacks on the

VCR and the AV IN 1 (or AV IN 2)

[R-AUDIO-L] jacks on the TV.

Video Connection

S-Video Connection

TV Rear Panel

1RF Cable

(Not supplied)

S-Video Cable

(Not supplied)

VCR Rear Panel

Connect Audio Cables between

the AUDIO OUT jacks on the

VCR and the AV IN 2

[R-AUDIO-L] jacks on the TV.

Connect an S-Video Cable

between the S-VIDEO OUT jack

on the VCR and the AV IN 2

[S-VIDEO] jack on the TV.

To begin, follow steps 1–3 in

the previous section to connect

the antenna or cable to your

VCR and your TV.

An S-Video cable may be included

with a VCR. (If not, check your local

electronics store.)

Each VCR has a different back

panel configuration.

When connecting a VCR, match

the color of the connection

terminal to the cable.

➣

2Audio Cable

(Not supplied)

TV Side Panel

BN68-01670A-00Eng-0613.indd 5 2008-06-13 ¿ÀÈÄ 7:37:01

English-6

Connecting a Digital Audio System

TV Rear Panel

1Optical Cable (Not supplied)

Digital Audio System

Connect an Optical Cable between

the “DIGITAL AUDIO OUT

(OPTICAL)” jacks on the TV and

the Digital Audio Input jacks on the

Digital Audio System.

When a Digital Audio System is

connected to the “DIGITAL AUDIO

OUT (OPTICAL)” jack: Decrease

the volume of the TV and adjust

the volume level with the system’s

volume control.

5.1CH audio is possible when the TV

is connected to an external device

supporting 5.1CH.

Each Digital Audio System has a

different back panel configuration.

When the receiver (home theater) is

set to On, you can hear sound output

from the TV’s Optical jack. When the

TV is displaying a DTV(air) signal, the

TV will send out 5.1 channel sound to

the Home theater receiver. When the

source is a digital component such as

a DVD and is connected to the TV via

HDMI, only 2 channel sound will be

heard from the Home Theater receiver.

If you want to hear 5.1 channel audio,

connect the DIGITAL AUDIO OUT

(OPTICAL) jack on the DVD player

or Cable/Satellite Box directly to an

Amplifier or Home Theater, not the TV.

➣

Connecting an Amplifier/DVD Home Theater

TV Rear Panel

1Audio Cable (Not supplied)

Amplifier/DVD Home Theater

Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and AUDIO IN [R-AUDIO-L]

jacks on the Amplifier/DVD Home

Theater.

When an audio amplifier is connected

to the “AUDIO OUT [R-AUDIO-L]”

jack: Decrease the volume of the TV

and adjust the volume level with the

Amplifier’s volume control.

Each Amplifier/DVD Home Theater has

a different back panel configuration.

When connecting an Amplifier/DVD

Home Theater, match the color of the

connection terminal to the cable.

➣

BN68-01670A-00Eng-0613.indd 6 2008-06-13 ¿ÀÈÄ 7:37:02

English-7

Connecting a PC

TV Rear Panel

1D-Sub Cable

(Not supplied)

2PC Audio Cable

(Not supplied)

Connect a D-Sub Cable between

PC IN [PC] connector on the TV and

the PC output connector on your

computer.

Connect a PC Audio Cable between

the PC IN [AUDIO] jack on the TV

and the Audio Out jack of the sound

card on your computer.

Each PC has a different back panel

configuration.

When connecting a PC, match the

color of the connection terminal to the

cable.

When using an HDMI/DVI cable

connection, you must use the

HDMI IN 2 terminal.

➣

Using the D-Sub Cable

Connect an HDMI/DVI cable between

the HDMI IN 2 jack on the TV and

the PC output jack on your computer.

Connect a 3.5 mm Stereo mini-

plug/2RCA Cable between the DVI

IN(HDMI2) [R-AUDIO-L] jack on the

TV and the Audio Out jack of the

sound card on your computer.

Using the HDMI/DVI Cable

Using the D-Sub Cable

TV Rear Panel

1HDMI/DVI Cable

(Not supplied)

23.5 mm Stereo mini-plug/

2RCA Cable (Not supplied)

Using the HDMI/DVI Cable

BN68-01670A-00Eng-0613.indd 7 2008-06-13 ¿ÀÈÄ 7:37:03

English-8

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

With the power on, press the MENU button.

The main menu appears on the screen.

The menu’s left side has icons: Picture, Sound,

Channel, Setup, Input, Application.

Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the

icon’s sub-menu. Press the EXIT button to exit.

The on-screen menus disappear from the

screen after about one minute.

➣

Storing Channels in Memory

(Automatic Method)

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Channel”, then

press the ENTER button.

Press the ▲ or ▼ button to select “Auto Program”,

then press the ENTER button.

Press the ▲ or ▼ button to select the antenna

connection, then press the ENTER button.

When selecting the Cable TV system: Press the

ENTER button to start the auto program.

Press the ▲,▼, ◄ or ► to select the correct analog

signal cable system source among “STD”, “HRC”,

and “IRC”. Press the ▲ or ▼ button to select “Start”,

then press the ENTER button. If you have Digital

cable TV, select the cable system signal source for

both Analog and Digital.

Viewing the Menus

The TV begins memorizing all available stations.

Press the EXIT button to exit.

To Stop the Auto Program Function

Press the MENU button while the Auto Program function is

being executed. You can also press the ENTER button

to stop the setup.

Checking to see if Channels were Stored in Memory

Press the CH button. Only the channels stored in memory

will be selected (in order).

Selecting the antennas

• Air: “Air” antenna signal.

• Cable: “Cable” antenna signal.

• Auto: “Air” and “Cable” antenna signals.

After all the available channels are stored,

it starts to remove scrambled channels.

The Auto program menu then reappears.

➣

ReturnEnter

Auto Program

Select the Antenna source to memorize.

Air

Cable

Auto

Move

Start

ReturnEnter

Auto Program

Selects the cable system.

Analog

Digital

HRC IRC

Move

STD

Start

STD

Auto Program

Auto Program in Progress.

Stop

Enter

Cable 38

50%

Return

DTV Cable : 12 Cable : 32

Auto Program

Removing scrambled channel.

Stop

Enter

DTV Cable 41

77%

Return

DTV Cable : 16 Cable : 45

BN68-01670A-00Eng-0613.indd 8 2008-06-13 ¿ÀÈÄ 7:37:04

English-9

7Backlight

Enter Return

AdjustMove

Setting the Channel List

You can delete or add a channel to display the channels

you want.

Press the MENU button. Press the ▲ or ▼ button to

select “Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “Channel List”,

then press the ENTER button.

Press the ◄ button to select “Added Channels”.

Press the ▲ or ▼ button to select “All Channels”.

Press the ENTER button.

Press the ▲ or ▼ button to select a channel to

delete, then press the TOOLS button. Press the

ENTER button to select “Delete”.

Press the ▲ or ▼ button to select a channel to add,

then press the TOOLS button. Press the ENTER

button to select “Add”.

Changing the Picture Standard

You can select the type of picture which best corresponds

to your viewing requirements.

Press the MENU button to display the menu.

Press the ENTER button, to select “Picture”.

Press the ENTER button to select “Mode”.

Press the ▲ or ▼ button to select “Dynamic”,

“Standard” or “Movie”.

Press the ENTER button.

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions

numbers 1 and 2.

Press the ▲ or ▼ button to select “Backlight”,

“Contrast”, “Brightness”, “Sharpness”, “Color” or

“Tint(G/R)”, then press the ENTER button.

Picture Mode

• Dynamic: Selects the picture for high-definition in a bright

room.

•

Standard: Selects the picture for the optimum display in a

normal environment.

•

Movie: Selects the picture for viewing movies in a dark

room.

Press the ◄ or ► button to decrease or increase

the value of a particular item. Press the EXIT button

to exit.

When you make changes to “Backlight”,

“Contrast”, “Brightness”, “Sharpness”, “Color”

or “Tint(G/R)”, the OSD will be adjusted

accordingly.

In PC mode, you can only make changes to

“Backlight”, “Contrast” and “Brightness”.

Settings can be adjusted and stored for each

external device you have connected to an input

of the TV.

The energy consumed during use can be

significantly reduced if the level of brightness of

the picture is reduced, and that this will reduce

the overall running cost.

➣

Picture Adjustment

• Backlight: Adjusts the brightness of LCD back light.

•

Contrast: Adjusts the contrast level of the picture.

•

Brightness: Adjusts the brightness level of the picture.

•

Sharpness: Adjusts the edge definition of the picture.

•

Color: Adjusts color saturation of the picture.

•

Tint(G/R): Adjusts the color tint of the picture.

2 Air

4 Air

4-2 ♥ TV #8

8 Air

13 Air

13-1 ♥ TV #3

Alice’s Adventures in Wonderland

All Channels

Air



Antenna



Zoom



Select

Option

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

Auto Program

Picture

Mode

Dynamic

►

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Dynamic

Standard

Movie

Mode : Standard

Backlight :7 ►

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture Options

Picture

BN68-01670A-00Eng-0613.indd 9 2008-06-13 ¿ÀÈÄ 7:37:04

English-10

To Select the Source

Press the SOURCE button on the Remote Control

You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you

would like to watch.

Available signal sources: TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, USB.

You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be

highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.

Using the Color buttons on the remote with the Source list

• Red (Refresh): Refreshes the connecting external devices.

• TOOLS (Option): Displays the “Edit Name” and “Information” menus.

➣

AV1 ----

AV2 ----

S-Video ----

Component1 ----

Component2 ----

Refresh

Option

Source List

BN68-01670A-00Eng-0613.indd 10 2008-06-13 ¿ÀÈÄ 7:37:05

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Flachbildfernseher Handbücher

Samsung

Samsung PN58A550S1F Bedienungsanleitung

Samsung

Samsung UN85S9AF Leitfaden

Samsung

Samsung BN68-03088A-01 Bedienungsanleitung

Samsung

Samsung LT-P 1545 Bedienungsanleitung

Samsung

Samsung BN68-02712A-06 Bedienungsanleitung

Samsung

Samsung LN-T4065F Bedienungsanleitung

Samsung

Samsung HG40NA590 Bedienungsanleitung

Samsung

Samsung LNS4695DX Bedienungsanleitung

Samsung

Samsung PN50B860Y2F Bedienungsanleitung

Samsung

Samsung UN40C6300SF Bedienungsanleitung

Samsung

Samsung PN50A510P3F Bedienungsanleitung

Samsung

Samsung UN55ES7003F Leitfaden

Samsung

Samsung BN68-02714F-02 Installations- und Betriebshandbuch

Samsung

Samsung LN32A540P2D Montage- und Bedienungsanleitung

Samsung

Samsung LED 6300 Series Leitfaden

Samsung

Samsung PN42B430 Bedienungsanleitung

Samsung

Samsung LN40D503F6FXZA Leitfaden

Samsung

Samsung PN50B560T5FXZA Bedienungsanleitung

Samsung

Samsung S22C650D Bedienungsanleitung

Samsung

Samsung PN50C6400TF Bedienungsanleitung

Samsung

Samsung LN-T4669FX - 46" LCD TV Bedienungsanleitung

Samsung

Samsung CL-17K10MJ Benutzerhandbuch

Samsung

Samsung PN42B450BD Bedienungsanleitung

Samsung

Samsung LW32A33W Kurzanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

RCA

RCA MR53R400 Bedienungsanleitung

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung

Philips

Philips Magnavox 37MF331D/37 Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung