Samsung PN50A760TF Bedienungsanleitung

English - 1

Rear & Side Panel Jacks

PN50A760T1F/

PN58A760T1F/ PN63A760T1F

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

To register this product please visit

www.samsung.com/global/register.

POWER IN

DIGITAL AUDIO OUT (OPTICAL)

AUDIO OUT (R/L)

PC IN[PC]/[AUDIO]

DVI IN (HDMI 2) (AUDIO-R/L)

HDMI IN 1, 2, 3

ANT IN

LAN

COMPONENT IN 1, 2 / AV IN 1

EX-LINK

HDMI IN 4

WISELINK PRO

S-VIDEO

AV IN 2

HEADPHONE

Video Input Performance Comparison

/ HDMI/DVI Best

/ PC/COMPONENT Better

S-VIDEO Good

VIDEO Normal

Audio Output Performance Comparison

OPTICAL (Digital) Best

AUDIO (Analog) Normal

BN68-01654A-Eng.indd 1 2008-07-02 오후 8:23:54

English - 2

You can use the remote control up to a distance of about 23 feet from the TV.

Remote Control Buttons

➢The performance of the remote control may be affected by bright light.

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to directly select the channel.

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

Press to select additional channels

(digital and analog) being broadcast

by the same station. For example,

to select channel “54-3”, press “54”,

then press “

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

” and “3”.

MUTE

Press to temporarily cut off the

sound.

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

VOL

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

Press to increase or decrease the

volume.

SOURCE

Press to display and select the

available video sources.

CH LIST

Used to display Channel Lists on the

screen.

TOOLS

Use to quickly select frequently used

functions.

UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

Press the Up/Down/Left/Right

sections of the wheel button and

Enter to select on-screen menu

items and change menu values.

You can navigate up and down the

menu, switch channels and adjust

the volume by turning the wheel

button. (See pages 18~19 of the

owner's manual)

While using MENU, TOOLS, and

WISELINK, the screen goes back

to the regular display if idle for more

than 20 seconds.

INFO

Press to display information on the

TV screen.

COLOR BUTTONS

Use these buttons in the Channel list

and WISELINK, etc.

Controls the caption decoder.

E.MODE

Press to select the preset display

and sound modes for sports, cinema

and games.

Use these buttons in the DMA,

WISELINK and Anynet+ modes.

(

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

: This remote can be used

to control recording on Samsung

recorders with the Anynet+ feature)

ON/OFF

Press to backlight the buttons on the

remote.

This function is convenient for using

at night or when the room is dark.

(Using the remote control with the

ON/OFF( ) light button set to On

will reduce the battery usage time.)

PRE-CH

Tunes to the previous channel.

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

Press to change channels.

(

Displays the main on-screen menu.

)

W.LINK(WISELINK)

This function enables you to view

and play photo and music files from

an external device. (Refer to pages

71 (Photo) and 81 (Music))

RETURN

Returns to the previous menu.

EXIT

Press to exit the menu.

INFO.L

Press to use the News, Stock

Market and Weather Forecast

information services available over

Samsung's network.

(see page 119 of the owner's

manual)

DMA (Digital Media Adapter)

Use this when connecting a

Samsung DMA device through an

HDMI interface and switching to

DMA mode.

For more information on the

operating procedures, refer to the

user manual of the DMA.

➢This button is available when

“Anynet+(HDMI-CEC)” is “On”.

(see page 125 of the owner's

manual)

CONTENT

This function enables you to view

“Contents Library”.

FAV.CH

Press to switch to your favorite

channels.

BN68-01654A-Eng.indd 2 2008-07-02 오후 5:26:33

English - 3

Connecting to HDMI (High Definition Multimedia Interface)

Connect an HDMI Cable between

the HDMI IN (1, 2, 3 or 4) jack on

the TV and the HDMI jack on the

DVD/Blu-Ray player or Cable Box /

Satellite receiver (Set-Top Box).

➢

What is HDMI?

• HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using

a single cable.

• The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed.

➢

DVI also requires a separate audio connection (see below).

➢

Each DVD/Blu-Ray player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢

The TV may not output sound and pictures may be displayed with abnormal color when DVD/Blu-Ray player or Cable Box /

Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no

sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back

of the TV. If this happens, contact the company that provided the DVD/Blu-Ray player or Cable Box / Satellite receiver to confirm

the HDMI version, then request an upgrade.

➢

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Connecting a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI

Connecting to DVI (Digital Visual Interface)

Connect a HDMI/DVI Cable or DVI-

HDMI Adapter between the HDMI

IN 2 jack on the TV and the DVI jack

on the DVD/Blu-Ray player or Cable

Box/Satellite receiver (Set-Top Box).

Connect Audio Cables between the

DVI IN (HDMI 2)

[R-AUDIO-L] jack on the TV and the

DVD/Blu-Ray player or Cable Box /

Satellite receiver (Set-Top Box).

➢

Each DVD/Blu-Ray player or Cable

Box / Satellite receiver (Set-Top

Box) has a different back panel

configuration.

➢

When connecting a DVD/Blu-Ray

player or Cable Box / Satellite receiver

(Set-Top Box), match the color of the

connection terminal to the cable.

➢

When using an HDMI / DVI cable

connection, you must use the HDMI IN

2 jack.

TV Rear Panel TV Side Panel

DVD/Blu-Ray Player or Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

DVD/Blu-Ray player or Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

HDMI Cable (Not supplied)

Connecting a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via DVI

BN68-01654A-Eng.indd 3 2008-07-02 오후 5:26:36

English - 4

Connecting a DVD/Blu-Ray player or Cable Box / Satellite receiver (Set-Top Box) via Component cables

Connecting to Y, PB, PR



Connect a Component Cable

between the COMPONENT IN (1 or

2) [Y, PB, PR] jacks on the TV and

the COMPONENT [Y, PB, PR] jacks

on the DVD/Blu-Ray player or Cable

Box / Satellite receiver(Set-Top

Box).



Connect Audio Cables between

the COMPONENT IN (1 or 2) [R-

AUDIO-L] jacks on the TV and the

AUDIO OUT jacks on the DVD/Blu-

Ray player or Cable Box / Satellite

receiver (Set-Top Box)

➢

Component video separates the video

into Y (Luminance (brightness)),

PB (Blue) and PR (Red) for

enhanced video quality. Be sure to

match the component video and

audio connections. For example, if

connecting a Component video cable

to COMPONENT IN 1, connect the

audio cable to COMPONENT IN 1

also.

➢

Each DVD/Blu-Ray player or Cable

Box / Satellite receiver (Set-Top

Box) has a different back panel

configuration.

➢

When connecting a DVD/Blu-Ray

player or Cable Box / Satellite receiver

(Set-Top Box), match the color of the

connection terminal to the cable.



Connect a Video Cable

(or S-Video Cable) between the AV

IN 2 [VIDEO]

(or S-VIDEO) jack on the TV

and the VIDEO OUT jack on the

Camcorder.

Connect Audio Cables between the

AV IN 2

[L-AUDIO-R] jacks on the TV

and the AUDIO OUT jacks on the

Camcorder.

➢

Each Camcorder has a different back

panel configuration.

➢

When connecting a Camcorder, match

the color of the connection terminal to

the cable.

Connecting a Camcorder

Camcorder

TV Side Panel

DVD/Blu-Ray player or Cable Box/

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

S-Video Cable(Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

BN68-01654A-Eng.indd 4 2008-07-02 오후 5:26:37

English - 5

Connecting to Video



Unplug the cable or antenna from

the back of the TV.

Connect the cable or antenna to the

ANT IN terminal on the back of the

VCR.



Connect an Antenna Cable between

the ANT OUT terminal on the VCR

and the ANT IN terminal on the TV.

Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN 1 [Y/VIDEO] or AV IN 2

[VIDEO] jack on the TV.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 1 (or AV IN 2) [R-AUDIO-

L] jacks on the TV.

➢

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the

TV. Alternatively, connect the cable to the “R” jack.

If your VCR is stereo, you must connect two cables.

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a VCR

VCR Rear Panel

TV Side Panel

Video Cable (Not supplied)

Audio Cable

(Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

Connecting to S-Video

To begin, follow steps 1–3 in the

previous section to connect the

antenna or cable to your VCR and

your TV.

Connect an S-Video Cable between

the S-VIDEO OUT jack on the VCR

and the AV IN 2 [S-VIDEO] jack on

the TV.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 2 [R-AUDIO-L] jacks on

the TV.

An S-Video cable may be included with your VCR. (If not, check your local electronics store.)

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

VCR Rear Panel

TV Side Panel

S-Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

BN68-01654A-Eng.indd 5 2008-07-02 오후 5:26:40

English - 6

Connect an Optical Cable

between the DIGITAL AUDIO OUT

(OPTICAL) jacks on the TV and the

Digital Audio Input (OPTICAL) jacks

on the Digital Audio System.

When a Digital Audio System is

connected to the DIGITAL AUDIO

OUT (OPTICAL) jack:

Decrease the volume of the TV,

and adjust the volume level with the

system’s volume control.

➢

What is OPTICAL?

• An optical cable converts an electric

signal into an optical light signal,

and transmits it through glass fibers.

S/PDIF is a transmission system of

digital audio in the form of a light wave

that uses a glass conductor.

➢

5.1CH audio is possible when the TV

is connected to an external device

supporting 5.1CH.

➢

Each Digital Audio System has a

different back panel configuration.

➢

When the receiver (home theater) is

set to On, you can hear sound output

from the TV’s Optical jack. When the

TV is displaying a DTV(air) signal, the

TV will send out 5.1 channel sound to

the Home theater receiver. When the

source is a digital component such as

a DVD and is connected to the TV via

HDMI, only 2 channel sound will be

heard from the Home Theater receiver.

If you want to hear 5.1 channel audio,

connect the DIGITAL AUDIO OUT

(OPTICAL) jack on the DVD/Blu-Ray

player or Cable/Satellite Box directly to

an Amplifier or Home Theater, not the

TV.

Connecting a Digital Audio System

Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD Home

Theater.

When an audio amplifier is

connected to the AUDIO OUT [R-

AUDIO-L] jacks terminals : Decrease

the volume of the TV, and adjust

the volume level with the Amplifier’s

volume control.

➢

Each Amplifier / DVD Home

Theater has a different back panel

configuration.

➢

When connecting an Amplifier / DVD

Home Theater, match the color of the

connection terminal to the cable.

Connecting an Analog Amplifier / DVD Home Theater

Digital Audio System

TV Rear Panel

Optical Cable (Not supplied)

Amplifier / DVD Home Theater

TV Rear Panel

Audio Cable (Not supplied)

BN68-01654A-Eng.indd 6 2008-07-02 오후 5:26:43

English - 7

Using the D-Sub Cable

Connect a D-Sub Cable between

PC IN [PC] jack on the TV and the

PC output jack on your computer.

Connect a PC Audio Cable between

the PC IN [AUDIO] jack on the TV

and the Audio Out jack of the sound

card on your computer.

Connecting a PC

Using the HDMI/DVI Cable

Connect a HDMI/DVI cable between

the HDMI IN 2 jack on the TV

and the PC output jack on your

computer.

Connect a 3.5 mm Stereo plug to

2RCA cable between the DVI IN

(HDMI2) [R-AUDIO-L] jack on the TV

and the Audio Out jack of the sound

card on your computer.

➢

Each PC has a different back panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

➢

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

Using the D-Sub Cable

Using the HDMI/DVI Cable

TV Rear Panel

3.5 mm Stereo plug to 2 RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

BN68-01654A-Eng.indd 7 2008-07-02 오후 5:26:48

English - 8

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢

It may take a little while before you see a full picture.

Turning the TV On and Off

Viewing the Menus

With the power on, press the MENU button.

The main menu appears on the screen. The menu’s

left side has icons:

Picture, Sound, Channel, Setup, Input,

Application.

 

Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s

sub-menu.

➢

To move to a lower menu, turn the wheel

clockwise when the menu Display is on the

screen. To move to a higher menu, turn the

wheel counterclockwise.



Press the EXIT button to exit.

➢

It takes about one minute until the on-screen

menu disappears.

Your TV can memorize and store all of the available

channels for both air and cable channels. After the

available channels are memorized, use the CH

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

or CH

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

button to scan through the channels. This eliminates

the need to change channels by entering the channel

digits. There are three steps for memorizing channels:

selecting a broadcast source, memorizing the channels

(automatic) and adding and deleting channels (Channel

Lists).

Memorizing the Channels

Selecting the Video Signal-source

Press the ENTER button to select Antenna.

Press the ▲ or ▼ button to select Air or Cable,

then press the ENTER button. Press the EXIT

button to exit.

Storing Channels in Memory

(Automatic Method)

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Press the ▲ or ▼ button to select Auto Program,

then press the ENTER button.

Before your television can begin memorizing the

available channels, you must specify the type of signal

source that is connected to the TV (i.e. an Air or a

Cable system).

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.

Mode :Standard

Cell Light : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture

Antenna

Air

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

Air

Cable

ChannelChannel

Antenna

Air ►

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

Channel

Antenna : Air

Auto Program

►

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

Auto Program

Select the Antenna source to memorize.

Air

Cable

Auto

ReturnEnterMove

Start

BN68-01654A-Eng.indd 8 2008-07-02 오후 5:26:49

English - 9

Press the ▲ or ▼ button to select the antenna

connection, then press the ENTER button.

● Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

When selecting the Cable TV system:

Press the ENTER button to start the auto program.

Press the ◄ or ► to select the correct analog signal

cable system source among STD, HRC, and IRC,

then press the ENTER button. If you have Digital

cable TV, select the cable system signal source for

both Analog and Digital.

● STD, HRC, and IRC identify various types

of cable TV systems. Contact your local

cable company to identify the type of cable

system that exists in your particular area.

At this point the signal source has been

selected.

The TV begins memorizing all available stations.

After all the available channels are stored, the TV

starts to remove scrambled channels (see page 47

of the owner's manual). The Auto program menu

then reappears.

● If you want to stop Auto Programming, press the

ENTER button.

The Stop Auto Program? message will be

displayed. Select Yes by pressing the ◄ or ►

button, then press the ENTER button.

Press the EXIT button to exit.

Viewing the Channel Lists

Using this menu, you can Add/Delete or set Favorite

channels and use the program guide for digital

broadcasts.

Press the MENU button.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button. Press the ▲ or ▼ button

to select Channel List, then press the ENTER

button.

Press the ◄ button to select Added Channels.

Press the ▲ or ▼ button to select All Channels,

then press the ENTER button.

➢ Shows all currently available channels.

Press the ▲ or ▼ button to select a channel to view,

then press the ENTER button.

Auto Program

Select the cable system.

Analog

Digital

HRC IRC

HRC IRCSTD

Start

ReturnEnterMove

STD

Auto Program

Stop

Removing scrambled channel.

DTV Cable 41

77%

DTV Air : 5 Air : 4

DTV Cable : 7 Cable : 5

ReturnEnter

Auto Program

Auto Program in Progress.

Stop

Cable 3

DTV Air : 5 Air : 4

DTV Cable : -- Cable : --

Enter Return

Channel

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

6 Air

6-1 ♥ TV #6

7 Air

7-1 ♥ TV #7

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

19 Air

All Channels

Air

Antenna

Zoom

Select Option

6 Air

6-1 ♥ TV #6

7 Air

7-1 ♥ TV #7

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

19 Air

Added Channels

Air

Antenna

Zoom

Select Option

BN68-01654A-Eng.indd 9 2008-07-02 오후 5:26:49

English - 10

Use to select TV or other external input sources such

as DVD/Blu-Ray players or Cable Box/Satellite receivers

(Set-Top Box) connected to the TV. Use to select the input

source of your choice.

To Select the Source

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Input, then press

the ENTER button.

Press the ENTER button to select Source List.

Press the ▲ or ▼ button to select the signal source,

then press the ENTER button.

➢

Available signal sources: TV, AV1, AV2,

S-Video, Component1, Component2, PC,

HDMI1, HDMI2/DVI, HDMI3, HDMI4,USB,

DLNA.

➢

You can choose only those external devices

that are connected to the TV.

In the Source List, connected inputs will be

highlighted and sorted to the top. Inputs that

are not connected will be sorted to the bottom.

➢Using the Color buttons on the remote with

the Source list.

• Red (Refresh): Refreshes the connecting

external devices.

• TOOLS (Option): Displays the Edit Name

and Information menus.

Your television has several setting options that allow you

to control the picture quality.

To select the desired picture mode, follow the

“Changing the Picture Standard” instructions number

1 to 2.

Press the ▲ or ▼ button to select Cell Light,

Contrast, Brightness, Sharpness, Color, or Tint

(G/R), then press the ENTER button.

You can select the type of picture which best

corresponds to your viewing requirements.

Press the MENU button to display the menu.

Press the ENTER button to select Picture.

Press the ENTER button to select Mode.

Press the ▲ or ▼ button to select Dynamic,

Standard, or Movie.

Press the ENTER button.

●

Dynamic: Select the picture for high-definition in

a bright room.

●

Standard

: Select the picture for the optimum

display in a normal environment.

●

Movie: Select the picture for viewing movies in a

dark room.

Picture Control

Changing the Picture Standard

Customizing the Picture Settings

Press the ◄ or ► button to decrease or increase the

value of a particular item.

Press the ENTER button.

Press the EXIT button to exit.

➢

●When you make changes to Cell Light, Contrast,

Brightness, Sharpness, Color, or Tint (G/R) the

OSD will be adjusted accordingly.



●When in PC mode, Tint(G/R), Sharpness and

Color are not available.



●Each adjusted setting will be stored separately

according to its input mode.

➢

This TV includes the Cell Light function to adjust

the panel brightness.

●

Cell Light: Adjusts the brightness of PDP Cell Light (pixels).

● Contrast: Adjusts the contrast level of the picture.

Picture

Mode

Cell Light : 7

Contrast : 80

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Dynamic

Standard

Movie

Mode

Standard

Cell Light : 7 ►

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture Options

Picture

7Cell Light

ReturnEnterAdjustMove

95Contrast

ReturnEnterAdjustMove

Source List

Edit Name

Input

● Brightness: Adjusts the brightness level of the picture.

● Sharpness: Adjusts the edge definition of the picture.

● Color: Adjusts color saturation of the picture.

● Tint(G/R): Adjusts the color tint of the picture by

compensating the red and green color.

AV1

----

AV2

----

S-Video

----

Component1

----

Component2

----

Refresh Option

BN68-01654A-Eng.indd 10 2008-07-02 오후 5:26:50

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Flachbildfernseher Handbücher

Samsung

Samsung LN22A650AD Bedienungsanleitung

Samsung

Samsung LNS4695DX Bedienungsanleitung

Samsung

Samsung LN19A330J1D Bedienungsanleitung

Samsung

Samsung CL-17K10MJ Benutzerhandbuch

Samsung

Samsung LNR1550X Bedienungsanleitung

Samsung

Samsung CT-21K40ML Bedienungsanleitung

Samsung

Samsung LN40C630K1FXZA Bedienungsanleitung

Samsung

Samsung LE32R53B Bedienungsanleitung

Samsung

Samsung LN19B650 - 19" LCD TV Bedienungsanleitung

Samsung

Samsung HG40NA590 Bedienungsanleitung

Samsung

Samsung CL-21M21MQ Benutzerhandbuch

Samsung

Samsung UN55ES8000FXZA Bedienungsanleitung

Samsung

Samsung PN42C430A1D Bedienungsanleitung

Samsung

Samsung LN40D503F6FXZA Leitfaden

Samsung

Samsung BN68-03116A-01 Bedienungsanleitung

Samsung

Samsung LN52C530 Bedienungsanleitung

Samsung

Samsung UN40B7000 - 40" LCD TV Bedienungsanleitung

Samsung

Samsung LN46D503F6F Bedienungsanleitung

Samsung

Samsung LED 7450 Bedienungsanleitung

Samsung

Samsung UN55D6900 Bedienungsanleitung

Samsung

Samsung PN50C6400TF Bedienungsanleitung

Samsung

Samsung LN40B530P7FXZA Bedienungsanleitung

Samsung

Samsung UN32C4000PD Bedienungsanleitung

Samsung

Samsung HLP5085W - 50" Rear Projection TV Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

RCA

RCA MR53R400 Bedienungsanleitung

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung

Philips

Philips Magnavox 37MF331D/37 Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung