Samsung LW32A23W Kurzanleitung
English-1
Viewing the Connection Panel
☛Whenever you connect an audio or video system to your set, ensure that all elements are switched
off.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-Acable television network
-Asatellite network
Connecting Set-Top Box, VCR or DVD
-Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
-If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
➣Input/Output Specification
Connecting External A/V Devices
-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-Connect RCA audio cables to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
-Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone
is connected, the sound from the built-in speakers will be disabled.
Power Input
1
2
3
4
Connector
SCART 1
SCART 2
Video Audio (L/R) S-Video RGB Video+Audio (L/R)
✔✔ ✔ Only TV Out
✔✔ Monitor Out
(TV/AV1/AV2/AV3/S-VHS)
Input Output
English-2
Viewing the Connection Panel
Connecting Component Devices (DTV/DVD)
-Connect component video cables to component connector (“Y”,“Pb”,“Pr”)on the rear of your set and the
other ends to corresponding component video out connectors on the DTV or DVD.
-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector (“Y”,“Pb”,“Pr”)on your set.
-The Y, Pb and Pr connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
-Connect RCA audio cables to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
Connecting Computer
-Connect the DVI connector to the PC video connector.
-Connect the stereo audio cable to “PC AUDIO IN (STEREO)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting Digital Audio Inputs
Connect optical digital audio cable or coaxial cable (RCA audio cable) to “DIGITAL AUDIO IN” on the rear of
your set and the other end to “DIGITAL OUT” of the equipment with a digital output to enjoy digital sound
(Multi-Channel Surround Sound, Stereo or Dolby Pro-Logic II).
Source Video Horizontal Frequency Vertical Frequency Resolution
(kHz) (Hz) (Lines)
TV/VIDEO PAL 15.625 50 575
SECAM 15.625 50 575
NTSC4.43 15.734 60 483
NTSC3.58 (Except RF) 15.704 60 483
Component 1/2 480/60i 15.734 60 483
480/60p 31.469 60 483
576/50i 15.625 50 576
576/50p 31.250 50 576
720/60p 45.000 60 720
1080/50i 28.125 50 1080
1080/60i 33.750 60 1080
5
6
7
English-3
Viewing the Connection Panel
Connecting 5.1 Channel Speakers For Home Theater
The other speakers
(Surround/Center/Sub
woofer):Connect the each
speaker audio cable to the
speaker output jack(surround
/Center / Woofer 1 )on the
rear of your set making sure
that the +, -polarities are
correctly aligned.
➢
Wind the speaker cable on
the core twice or more.
8
10
12 11
Main Speaker : When the speakers are attached with LCD TV
Main Speaker : When the speakers are separated from LCD TV
Connect the speaker audio cables to the main
speaker output jacks on the rear of your set
making sure that the +, -polarities are correctly
aligned.
➢The speakers MUST have more than
10watts rating (Impedance 8Ω).
Mount the brackets on the speaker
and your set.
Connect the speaker and your set
using screws.
Surround
Speaker
Surround
Speaker
Woofer
Center Speaker
LCD TV Rear
Main Speaker Main Speaker
9
9
English-4
How to Install the Wall Bracket
How to Adjust the Angle of the Bracket
List of Contents
Wall bracket Main body bracket Screws
1Wall bracket plate
2Assembly hinges
(Make sure they are a
left/right pair.)
1Bracket bar
2Brackets
(Left and Right)
(The two brackets
are interchangeable.)
Plastic screw anchors: 4
Screws: 8
Screws: 4
➢Please adjust the angle of the bracket to 0 degrees before you fix it to the wall.
Captive screws
Make sure you put the right
hinge to the right side of the
bracket and vice versa.
Be aware of the correct installation direction
of the bracket when you set the angle to 30
and 32 degrees. (The direction for 30 and 32
degrees is indicated on the bracket surface.)
When you first open the box, the bracket is
not assembled.
Put the left and right brackets in the direction
of the arrow and tighten the captive screws.
1. Attach the LCD TV onto the wall bracket.
(Follow the instructions below.)
2. Pull the upper part of the LCD TV fixed to
the bracket forward in the direction of the
arrow and adjust the angle.
3. You can adjust the angle to your liking
between 0°~20°(±2°).
English-5
How to Install the Wall Bracket
How to Attach the LCD TV to the Bracket
The LCD TV in the picture may not look exactly like yours.
(You assemble the plastic screw anchors and the screws the same way regardless of the model of your TV.)
Assemble the main body bracket as in the
pictures in 2. and below.
3
Put the four holders on the back of the TV
into the holes on the wall bracket, (1) lower
the TV, and (2) hang the TV on the bracket.
Fasten the TV securely to the wall bracket with
stickscrews as in (3) so that the two will not
separate.
4
Assemble the plastic screw anchors
and the screws. (See the picture below.)
1
Assemble the main body bracket as below
and put the plastic screw anchors in.
2
LCD TV
Wall bracket
Wall
1) Attach the plastic screw anchors to
each of the left/right brackets as in 1.
2) Assemble the bracket bars to the
left/right brackets as in the picture
on the left.
They are left-right and upper-lower
symmetry and the assembly direction
does not matter.
Warning
1. Installing a wall bracket must be done by a
qualified professional installer.
2. After you hang the LCD TV on the wall
bracket, check from both sides to see if the
plastic screw anchors are securely in
place.
3. Be careful not to get your fingers caught
during installation or while adjusting the
angle of the bracket.
4. The LCD TV may fall from the wall and
hurt someone if the wall bracket is not
attached securely to the wall. Make sure
the bracket is screwed tightly to the wall.
Andere Handbücher für LW32A23W
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Samsung LCD-Fernseher Handbücher
Samsung
Samsung 6 series Bedienungsanleitung
Samsung
Samsung LA32N7 Bedienungsanleitung
Samsung
Samsung LW22A13W Bedienungsanleitung
Samsung
Samsung LE26R7 Bedienungsanleitung
Samsung
Samsung LN46E550F6F Bedienungsanleitung
Samsung
Samsung UE32EH4000W Leitfaden
Samsung
Samsung UN50F5500 Leitfaden
Samsung
Samsung LN52B630 - 52" LCD TV Bedienungsanleitung
Samsung
Samsung S22C550H Bedienungsanleitung
Samsung
Samsung LA32R8 Bedienungsanleitung
Samsung
Samsung LT-P2045U Bedienungsanleitung
Samsung
Samsung 6 series Bedienungsanleitung
Samsung
Samsung LA22B650T6M Bedienungsanleitung
Samsung
Samsung UN32C6500VF Bedienungsanleitung
Samsung
Samsung 950 Bedienungsanleitung
Samsung
Samsung S8 C Series Bedienungsanleitung
Samsung
Samsung LW15N13W Bedienungsanleitung
Samsung
Samsung J6300 Leitfaden
Samsung
Samsung LN32D450 Leitfaden
Samsung
Samsung Series 4+ Bedienungsanleitung
