Samsung SCI-503 Bedienungsanleitung

Owner’s

Instructions

SFT-503

SCI-503

Digital Satellite Receiver (FTA, CI)

user's 4/9/01 3:24 PM Page 1

Safety Precautions

This STB has been manufactured to meet international safety standards.

Please read the following safety precautions carefully before you handle the STB.

MAIN SUPPLY Use only 90-250V AC 50/60Hz.

CABLE Use standard certified cables to prevent any malfunction of

the STB.

LOCATION Locate the STB indoor. Locate STB away from potential

hazards such as houseplants, lightning, raining and direct

sunlight.

CLEANING 1. Always disconnect the STB power cord from the wall socket

before cleaning it.

2. Use a light damp cloth(no solvents)to dust the STB.

OVERLOADING Do not overload wall outlets, extension cords or adapters.

These can cause fire or electrical shock.

VENTILATION 1. NEVER block ventilation slots of STB.

2. NEVER stand the STB on soft furnishings or carpets.

3. Ensure that a free airflow is maintained around the STB.

4. Do not use or store the STB where it is exposed to direct

sunlight or near a heater.

5. NEVER stack other electronic equipment on top of the STB.

LIQUIDS Keep liquids away from the STB.

SMALL OBJECTS Coins or other small objects must be kept away from the STB.

They can fall through ventilation slots of the STB and cause

serious damage.

ATTACHMENTS Do not use any attachments that are not recommended.

These may cause hazards or damage the equipment.

CONNECTION TO Before connecting or disconnecting the cable from the satellite

THE SATELLITE dish to the STB, disconnect the STB from the mains supply.

DISH LNB FAILURE TO DO SO CAN DAMAGE THE LNB.

EARTHING The LNB cable MUST BE EARTHED to the system earth for the

satellite dish. The earthing system must comply with SANBS061.

General Information

user's 4/9/01 3:24 PM Page 2

For best satisfaction of SAMSUNG’s customer, we do our best for each product and serv-

ices.

Also we will support our customer through our local sales, service network and electronic

server system of SAMSUNG.

Moreover, we maintain very close working relationships with our customers.

We take a highly disciplined engineering approach to product design, manufacture, test-

ing, acceptance and to technical and maintenance support.

We conduct comprehensive testing of the units, provide complete documentation support

and deliver the highest quality, most consistent products on time, every time.

SAMSUNG supports you via its homepage with useful information and new software of

the STB.

When you have a question about this product, please refer the following homepage.

Homepage : http://stb.samsungcorp.com

To provide you the convenience of usage SAMSUNG has the right to make changes and

improvements to any of the products described in this manual and the manual of the

products without any notice in advance.

LIGHTNING 1. The STB must remain connected at all times to the main

power supply and satellite dish.

2. However, Manufacture's instructions for safeguarding other

equipment connected to the STB, TV set, etc., must be

followed during lightning storms.

3. Ensure lightning protection devices for the terrestrial

antenna, mains, and LNB are installed.

SERVICING 1. Do not attempt to service this product yourself.

2. Refer all servicing to qualified service representatives.

Support & Copyright

General Information

user's 4/9/01 3:24 PM Page 3

Contents

Understanding the Remote Control Unit 1 ~ 2

Connecting Your Equipment 3

Front Panel 3

Rear Panel 4

Connection 5 ~ 6

Reference 7 ~ 8

Setting Up Your System 9

Menu Tree 9

Automatic Channel Search for a Satellite 10

Manual Channel Search for Transponder 10

NIT channel search 11

Basic Function 11 ~ 12

Menu Operation 13

Main Menu 13

Channel List 14

Program Guide 15

Channel Control 16

Edit Channel List 16

Edit Favorite TV/Radio Channels 17

Edit Lock Channel 18

Rename Channel 19

user's 4/9/01 3:24 PM Page 4

Contents

Installation 19

DiSEqC Mode 20

Channel Search 21

Rename Satellite 21

Automatic Channel Search 22

Manual Channel Search 23

NIT Channel Search 24

Parental Lock 25

Receiver Lock 25

Change PIN Code 26

Factory Reset 26

Delete Whole Channel 26

System Setting 27

Utillity 28 ~ 29

Common Interface 30

Troubleshooting 31

Technical specifications 32 ~ 33

user's 4/9/01 3:24 PM Page 5

Understanding the

Remote Control Unit

SLEEP(option)

Remote Control Unit (RCU)

18 MUTE

17 PAUSE

TEXT (option)

11 CHANNEL

UP/DOWN

6 BACK

5 INFORMATION

4 TV/RADIO

7 EPG

14 NUMERIC

10 VOLUME UP/DOWN

STANDBY

SOUND

TIME

SUBTITLE(option)

LEFT/RIGHT

PAGE UP/DOWN

EXIT

FAVORITE

(F1,F2,F3,F4)

TV/SAT

user's 4/9/01 3:24 PM Page 6

Understanding the

Remote Control Unit

Please note: The design of the Remote Control Unit (RCU) may be changed

without notice in advance.

SOUND

Selects the sound track list for the current

service.

SUBTITLE (RED)

Used to change satellite at channel

control menu.

TIME (GREEN)

Displays the current time on the right side

of the screen .

TV/RADIO (YELLOW)

Receiver switches between TV program

and Radio only receive mode.

INFORMATION (BLUE)

Displays the program information box on

the screen .

BACK (At channel control menu.)

Returns to the item.

EPG

Displays the TV/Radio program guide.

Displays the Main Menu on the screen or

returns to the previous menu.

Used to confirm your choice.

VOLUME UP/DOWN

Used to increase or decrease the volume.

CHANNEL UP/DOWN

Used to tune to the next or previous channel.

Used to move up or down highlight marked

cursor.

EXIT

Returns to the viewing mode from a menu.

STANDBY

Switches between Operation and Standby

mode.

NUMERIC

Used to select the service and enter the channel

information and PIN Code.

FAVORITE (F1,F2,F3,F4)

Used to set the favorite service list of each user.

4 users can have his own favorite option.

Displays the Favorite channel.

TV/SAT

Receiver switches between TV and Satellite

receive mode.

PAUSE

Used to select the freeze function.

Press once to freeze the screen picture.

Press again or change channel to go to normal

again.

MUTE

Used to enable or disable the audio.

LEFT/RIGHT, PAGE UP/DOWN

Used to move left or right highlight

marked Cursor.

Used to move up or down a page in the

channel list.

user's 4/9/01 3:24 PM Page 7

Connecting Your Equipment

STANDBY Switches between Operation and Standby mode.

MENU Displays the Main Menu on the screen or returns to the previous memu.

CLEAR Returns to the viewing mode from a menu (in menu mode).

CH UP/DOWN Use to tune to the next or previous channel.

Use to move up or down highlight marked Cursor.

VOL UP/DOWN Use to increase or decrease the volume.

Use to move left or right highlight marked Cursor .

OK Use to confirm your choice.

CAM Slots 2 Slots for Common Interface CAM (VIACCESS, IRDETO,

NAGRAVISION, CRYPTOWORKS, CONAX) with SmartCard

Front Panel

12345 6 7

user's 4/9/01 3:24 PM Page 8

Connecting Your Equipment

ANT IN Connect to TV ANT input

TV OUT Connect to TV or VCR via a coaxial cable.

RS232 Connect to a PC for S/W upgrade.

VCR SCART Connect this socket to that of VCR via scart cable.

(SFT-503E only)

TV SCART Connect this socket to that of TV via scart cable.

(SFT-503E only)

0V / 12V Connect 12V to an external 0V/12V switch.

VIDEO Connect video to TV using RCA jack.

AUDIO Connect audio R/L to TV or Audio Amp or System.

LOOP THROUGH Connect to the other satellite receiver.

LNB Connect to satellite antenna.

POWER Power ON( ), OFF( )

Rear Panel

12 3 4 5 6 8 79

user's 4/9/01 3:24 PM Page 9

Connecting Your Equipment

Connection

There are several ways of connecting the STB to your existing Audio/TV system.

We recommend using one of the following connection cases for best results:

1. TV only

1. Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of

the STB and the other end to a RCA/Cinch jack on your TV.

If your TV doesn’t have a RCA/Cinch jack, connect one end of RF cable to the

TV OUT on the back of the STB and the other end to a RF input jack on your TV.

2. Finally connect the coaxial cable from the LNB to the LNB IN jack on the STB.

2. With Hi Fi System

Connect an RCA/Cinch stereo cable from the AUDIO L, R jacks on the back of

the STB to the LINE, AUX, SPARE OR EXTRA input jacks on your Hi Fi System.

(To RCA/Cinch on your TV)

(If your TV does’nt have

a RCA/Cinch Jack)

user's 4/9/01 3:24 PM Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Empfänger Handbücher

Samsung

Samsung HT-DL100 Bedienungsanleitung

Samsung

Samsung DSB-A200C Bedienungsanleitung

Samsung

Samsung HW-D7000 Bedienungsanleitung

Samsung

Samsung SWA-5000 Bedienungsanleitung

Samsung

Samsung HT-AS700 Bedienungsanleitung

Samsung

Samsung DSR 3700 Bedienungsanleitung

Samsung

Samsung DTB-D700F Bedienungsanleitung

Samsung

Samsung SWA-4000 Bedienungsanleitung

Samsung

Samsung HT-AS610 Bedienungsanleitung

Samsung

Samsung DCB-B270R Bedienungsanleitung

Samsung

Samsung CW28C7NG8XXEC Bedienungsanleitung

Samsung

Samsung HT-DB120 Bedienungsanleitung

Samsung

Samsung HT-DS610 Bedienungsanleitung

Samsung

Samsung CK3366ZR4X/BWT Bedienungsanleitung

Samsung

Samsung DSR 9500A Bedienungsanleitung

Samsung

Samsung DSR 9500A Bedienungsanleitung

Samsung

Samsung SWA-8500S Bedienungsanleitung

Samsung

Samsung SP42W4HPX/BWT Bedienungsanleitung

Samsung

Samsung DTB-B570E Bedienungsanleitung

Samsung

Samsung CS21K5NLX/XTT Bedienungsanleitung

Samsung

Samsung HT-AS610 Bedienungsanleitung

Samsung

Samsung CL-29Z43MQ Bedienungsanleitung

Samsung

Samsung HW-D700 Bedienungsanleitung

Samsung

Samsung SWA-5000 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung