Samsung SOC-4030 Bedienungsanleitung

SOC-4030

High Resolution Day & Night

Built-in V/F Lens Camera

INSTRUCTION MANUAL

P/No. : Z6806-0676-01A

VAN 05. 10

www.samsungtechwin.com

www.samsungcctv.com

•SAMSUNG TECHWIN CO., LTD.

145-3,Sangdaewon1-dong,Jungwon-gu,Seongnam-si,

Gyeonggi-do462-703,Korea

TEL :+82-31-740-8137~8141 FAX:+82-31-740-8145

•SAMSUNG OPTO-ELECTRONICS AMERICA,INC.

ELECTRONIC IMAGING DIV.

40SeaviewDrive,Secaucus,NJ07094,U.S.A

TEL :+1-201-902-0347 FAX:+1-201-902-0429

•SAMSUNG TECHWIN MOSCOW OFFICE

Korp14,37-A,PR-KT,Lenningradsky,Moscow125167,Russia

TEL :+7-95-258-9296,9298 FAX:+7-95-258-9297

•SAMSUNG OPTO-ELECTRONICS UK, LTD.

SamsungHouse,1000HillswoodDrive,HillswoodBusiness

ParkChertsey,SurreyKT16OPS

TEL :+44-1932-45-5308 FAX:+44-1932-45-5325

•TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.

7PingchangRd,NankaiDist.Tianjin300190,P.RChina

TEL :+86-22-2761-4724(33821) FAX:+86-22-2761-6514

SALES NETWORK

About this manual

Pleasereadthismanualcarefullybeforeinstallingandusingthecamera.Besuretokeepthemanualhandyforlaterreference.

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

INFORMATION-This equipment has been tested and found to comply with limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

WARNING -Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

WARNING : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicablein the European Union andotherEuropeancountries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other

household wastes at the end of its working life. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local

government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before operating the camera, confirm the camera model and proper input

power voltage. In order to that you can understand this manual thoroughly,

we'll introduce our model description.

■SDC-415 SERIES

• NTSC MODELS •PAL MODELS

SOC-4030N SOC-4030P

■ MODEL DESCRIPTION

• SOC-4030X

• SIGNAL SYSTEM

N --> NTSC MODEL

P --> PAL MODEL

• POWER SOURCE

DC12V/AC24V compatible

SIGNAL SYSTEM

Front

Side

Back

Connecting To Power

Panning & Tilting Control

Precautions

Composition

Name and Function of Each Section

Setting

• LENS (selection)

• SHUTTER (condition and speed control)

• WHITE BALANCE control

• BACKLIGHT (Backlight Compensation)

• AGC (Auto Gain Control)

• SSNR (Samsung Super Noise reduction)

• SENS-UP

• SPECIAL

Camera Operation

Installation

Contents

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

Specification

Troubleshooting

Warning

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time, a fire

may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not handle the camera with wet hands

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

Features

Built-in Auto Iris Vari-Focal Lens.

The focal length of lens is 3 to 9 mm, Equivalent

to3Xzoom. The built-inlens allow thecamera

to have wider dynamic range, therefore you

can use in various applications.

Electronic DAY & NIGHT

This camera has a function that electronically

selects the mode that is appropriate for daytime

or night-time conditions. The COLOR mode

operates in daytime conditions to provide

optimum colors, and BW mode operates in

night-time conditions to enhance the definition

of the image.

PRIVACY Function

The PRIVACY function conceals the areas

you do not wish to appear on the screen.

Controlled by OSD Menu

The camera can be controlled by selecting

text displayed on the monitor screen.

High Sensitivity

The built-in high sensitivity COLOR CCD

enables a clear image even in 0.3Lux or

lower illumination.

SSNR (Samsung Super Noise

Reduction)

By using built-in SSNR function manufactured

by SAMSUNG TECHWIN, the amount of low

illuminance noise has been significantly

reduced, and the signal-to-noise ratio (S/N)

as well as horizontal resolution have been

improved, resulting in a clear and sharp

image display even in the dark.

Compatible Power Source

One power connection self-configures to

either 12V DC or 24AC. AC Line lock standards

with all cameras In 24V AC operation.

Additional Functions

SENS-UP, MOTION DETECTION, MIRROR,

SHARPNESS and SYNC(INT/LL) functions

are also available.

COLORCCD CAMERA User’s Manual

Do not install under extreme

temperature conditions.

Use only under temperature conditions

between -10˚C and +50˚C. Provide good

ventilation when using in high temperature

conditions.

Do not install in high humidity

environment.

Maylower imagequality.

Do not install under unstable

lighting conditions.

Severe lighting changes or flickering may

hinder normal camera operation.

Avoid touching the camera lens.

Thelens isthe mostimportant component

of the camera. Be careful not to smear it

with fingerprints.

Do not drop the camera or

subject it to physical shock.

May cause a product malfunction.

Never keep the camera face to

strong light directly.

May damage the CCD.

Do not expose the camera to

radioactivity.

Radioactivity exposure may damage the

CCD.

Do not expose the camera to

rain or other types of liquids.

Wipe dry any liquids. Liquids may contain

minerals that are corrosive to electronic

components.

• Exposure to a spotlight or an object emitting strong light may cause smear or

blooming.

• Ensure that the power source complies with normal specifications before supplying

it to the camera.

Notes

Precautions

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

Composition

Name and Function of Each Section

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

1110

FRONT

1. High Resolution Day & Night Built-in

V/F Lens Camera SOC-4030N/P

3. Instruction Manual

2. DC 12V/500mA Adaptor

TrIpod Mounting Bracket Screw Hole

Used to fix the Tripod mounting bracket on the top of the camera.

Control Cover

Used to access focus or zoom handle.

Zoom Handle

To adjust zoom magnification by turning

Focus Handle

To provide for accurate focusing of an object within the lens field of view

• When you finish adjusting zoom and focus lever, fix the lever by turning clockwise.

Notes

SIDE BACK

Name and Function of Each Section

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

1312

You can remove and install this bracket on the top

of the camera. You must use the supplied screw or

the equivalent (within 6mm). If not, the bracket

may not be fixed properly.

Tripod Mounting Hole

Used to install the camera on

an optional tripod. The tripod

must be equipped with the

screw specified as shown

below.

Tripod Mounting Bracket

Video output terminal

Sends video signal and connects to the video input terminal of the monitor.

Setting button

• SETUPbutton :Used for the menu display. This button can be used to confirm

settings after changing the value of the selected function or

current conditions.

• UP &DOWNbuttons :Used for selecting items by moving the cursor up or down

on the menu screen.

•LEFT& RIGHTbuttons :Used when changing item values, by moving the cursor

to the left or right on the menu screen.

Power input terminal

Connects to the power appropriate to each model.

Power lamp

Lights up when the correct power is supplied to the camera.

1/4"-20 UNC (20 THREAD)

L:4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

Installation

Connecting to a Monitor

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

1514

Please connect the video output terminal located on the back of the camera to the

monitor.

• The connection method varies depending on the type of monitor and accessories.

Please refer to the user's manual for each instrument.

• Please turn off the power when connecting.

• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and

select 75Ωfor the Intermediate device as shown in the picture below.

CCD Camera

CCD Camera Intermediate End monitor

Monitor •UseAC24V/300mAorDC12V/500mApowersource forSOC-4030N/SOC-4030P.

•As the voltage drop according to the length of the cable in the above table,

a camera may malfunction if there is an excessively long cable run.

* Voltage for camera operation: 12V DC ±10%

* Voltage drops in the above table are variable according to types of cable manufacturer.

Connecting to Power

Resistance of copper wire [at 20C˚ (68˚F)]

Copper wire size(AWG) #24(0.22mm2)#22(0.33mm2)#20(0.52mm2)#18(0.83mm2)

Resistance value(Ω/m) 0.078 0.050 0.030 0.018

Voltage drop(V/m) 0.028 0.018 0.011 0.006

• Be sure to connect power only after all the installation is complete.

• Note that AC or DC adaptor is not supplied with camera.

• Use the UL listed, class 2 power transformer of AC 24V adaptor.

• Ground should be connected to the GND terminal.

Notes

Camera Operation

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

1716

SETUP menu

LENS ·DC

SHUTTER(Conditonandspeedcontrol) · FLK

WHITEBALANCEcontrol ·ATW ·AWC ·MANUAL

BACKLIGHT ·OFF ·LOW ·MIDDLE

(Backlightcompensation) ·HIGH

AGC(AutoGainControl) ·OFF ·LOW ·MIDDLE

·HIGH

SSNR ·OFF ·LOW ·MIDDLE

(Samsungsupernoisereduction) ·HIGH

SENS-UP(Lowilluminance) ·OFF ·AUTO

SPECIAL ·CAMERAID ·COLOR

·SYNC ·MOTIONDET

·PRIVACY ·MIRROR

·SHARPNESS ·RESET

·RETURN

EXIT

1. Please press the SETUP button

• Settings can now be made. The SETUP menu is displayed on the monitor.

2. Please select any function you wish to activate by using the UP and DOWN

buttons.

•

The arrow can be moved up or down by using the UP and DOWN buttons.

Please position the arrow to point to the function you wish to operate.

LEFT button

UP button

SETUP button

RIGHT button

DOWN button

Menu Settings

Settings can be made using the 5 buttons located on the back of the camera.

Camera Operation

COLORCCD CAMERACOLORCCD CAMERA User’s ManualUser’s Manual

1918

3. Please press the LEFT or RIGHT button if you wish to change mode.

• When the LEFT or RIGHT button is pressed, available values and modes

are displayed in order. Please keep pressing the button until you get to the

mode you wish to operate.

4. Please select 'EXIT' and then press the SETUP button to finish the setting.

LENS (selection)

This function is used to adjust the brightness of the screen.

1. When the SETUP menu is displayed on the screen, please position the arrow

to point to 'LENS' by using the UP and DOWN buttons.

2. Lens type is fixed DC.

Select any function you

wish to operate by

using the UP and

DOWN buttons.

Modes can be changed

using the LEFT and

RIGHT buttons.

DC: you can control the brightness of the screen.

3. Please press the SETUP button if you wish to return to the previous menu.

• If appears at the mode you wish to operate, it means that there is a sub-

menu which can be selected by pressing the SETUP button.

• If---appears at the mode item, it means that there is no mode available to be

selected.

Notes •The brightness of the screen can be adjusted within the range of 1~70. The

optimum level of brightness for the user can be achieved by adjustment.

Notes

Inhaltsverzeichnis

Andere Samsung Sicherheitskamera Handbücher

Samsung

Samsung SCC-C6433(P) Bedienungsanleitung

Samsung

Samsung SND-560 Bedienungsanleitung

Samsung

Samsung SCC-B5355 Bedienungsanleitung

Samsung

Samsung SCC-B9374 Bedienungsanleitung

Samsung

Samsung SCD-2081 Bedienungsanleitung

Samsung

Samsung SCC-B53X Series Bedienungsanleitung

Samsung

Samsung SNP-6321H Bedienungsanleitung

Samsung

Samsung SCV-2080 Bedienungsanleitung

Samsung

Samsung iPolis SND-460V Bedienungsanleitung

Samsung

Samsung SCC-B5344 Bedienungsanleitung

Samsung

Samsung iPOLiS SNP-3120 Bedienungsanleitung

Samsung

Samsung SCC-B5395 Bedienungsanleitung

Samsung

Samsung SCC-C6455 Bedienungsanleitung

Samsung

Samsung SHB-4300H Bedienungsanleitung

Samsung

Samsung Wisenet SDC-9443DF Bedienungsanleitung

Samsung

Samsung SDZ-375 Bedienungsanleitung

Samsung

Samsung BW-4302 Series Bedienungsanleitung

Samsung

Samsung IPOLIS SNC-570 Bedienungsanleitung

Samsung

Samsung iPolis SND-3082 Bedienungsanleitung

Samsung

Samsung SCB-2001 Bedienungsanleitung

Samsung

Samsung SCZ-3430N Bedienungsanleitung

Samsung

Samsung iPolis SND-460V Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Samsung

Samsung WISENET SNH-V6410PN Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung