Samsung SMT-i5243 Bedienungsanleitung

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 APRIL 2011

TABLE OF CONTENTS

USER INSTRUCTIONS SECTION

PART DESCRIPTION PAGE

1 ENHANCED DISPLAY PROGRAMMING

1.1 OVERVIEW ............................................................................................................................. 1.1

1.2 LOCKING YOUR KEYSET.................................................................................................... 1.4

1.3 CHANGING YOUR PASSCODE ........................................................................................ 1.5

1.4 CALL FORWARDING........................................................................................................... 1.6

1.5 SETTING YOUR ANSWER MODE..................................................................................... 1.8

1.6 PROGRAMMING YOUR STATION’S NAME.................................................................. 1.9

1.7 PROGRAMMING PERSONAL SPEED DIAL LOCATIONS ........................................1.11

1.8 NAMING YOUR PERSONAL SPEED DIAL LOCATIONS ..........................................1.12

1.9 ADDING EXTENDERS TO KEYS .....................................................................................1.13

1.10 CHECKING STATION STATUS ........................................................................................1.14

1.11 CHANGING YOUR TIME AND DATE DISPLAY ..........................................................1.15

1.12 SETTING STATION ON/OFF OPTIONS ........................................................................1.16

1.13 SELECTING A RING TONE ............................................................................................... 1.19

1.14 ALARM REMINDER............................................................................................................1.20

1.15 STATION VOLUME ............................................................................................................1.21

1.16 SETTING A PROGRAMMED MESSAGE........................................................................1.23

1.17 ALARM REMINDER WITH MESSAGE ...........................................................................1.24

1.18 CALLER ID DISPLAY..........................................................................................................1.25

2 SMT-i5243 USER GUIDE

3 SMT-i5230 USER GUIDE

4 SMT-i5220 USER GUIDE

5 SMT-i5210 USER GUIDE

6 SMT-i3105 USER GUIDE

7 MOBEX USER GUIDE

8 ITP-5112L USER GUIDE

9 ITP-5121D USER GUIDE

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 APRIL 2011

10 ITP-5107S USER GUIDE

11 DS 5000 SERIES USER GUIDE

12 iDCS KEYSET USER GUIDE

13 DCS KEYSET USER GUIDE

14 SYSTEM ADMINISTRATION AND SPECIAL FEATURES GUIDE

15 STANDARD TELEPHONE USER GUIDE

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.1

PART 1. ENHANCED DISPLAY PROGRAMMING

1.1 OVERVIEW

•iDCS KEYSETS

This diagram illustrates the keys on a

iDCS 28 BUTTON and a iDCS 18

BUTTON keyset that have special

functions during programming. When

required, these keys will be referred to by

the names described in the diagram.

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.2

This diagram illustrates the keys on a iDCS 8 BUTTON

keyset that have special functions during

programming. When required, these keys will be

referred to by the names described in the diagram.

•ITP and DS 5000 Series Keysets

This diagram illustrates the keys on an ITP 5121-D keyset. The ITP and DS 5000 keysets have

keys that have special functions during programming. When required, these keys will be

referred to by the names described in the diagram.

A BC D EF

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.3

•SMT-i Series Keysets

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.4

1.2 LOCKING YOUR KEYSET

You can lock your keyset to prevent other people from making or receiving calls while you are

away. You can unlock it when you return.

ACTION DISPLAY

1. Press the transfer key followed by 100

Display shows

[201] STN LOCK

PASSCODE:_

2. Enter your passocde

Default is 1234

[201] STN LOCK

UNLOCKED

3. Enter 1for locking outgoing calls (Internal

calls will still be allowed).

[201] STN LOCK

LOCKED OUTGOING

4. Enter 2for locking all calls (Internal and

external calls will not be allowed).

[201] STN LOCK

LOCKED ALL CALLS

5. Enter 0to unlock your phone. [201] STN LOCK

UNLOCKED

6. Press the transfer key to save and exit

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.5

1.3 CHANGING YOUR PASSCODE

Each keyset user can set or change his/her individual passcode. This passcode is used to lock

or unlock keysets, for toll restriction override and to access the DISA feature.

NOTE: Default passcodes cannot be used for toll restriction override or for DISA access.

ACTION DISPLAY

1. Press the transfer key followed by 101

Display shows

[201] PASSCODE

OLD CODE:_

2. Enter the existing passcode (default = 1234) [201] PASSCODE

OLD CODE:****

3. Enter the new passcode [201] PASSCODE

NEW CODE:_

4. Reenter the new passcode to verify the number

If reentered correctly, display shows

[201] PASSCODE

VERIFY :SUCCESS

5. Press the transfer key to save and exit

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.6

1.4 CALL FORWARDING

The OfficeServ 7030 allows the system administrator to program the call forward destinations

for other station users. This MMC also allows call forward to be set after the destination has

been entered.

The OfficeServ 7030 system allows six types of call forwarding. There is an option, FORWARD

BUSY/NO ANSWER, that allows both busy and no answer to be activated at the same time,

provided that destinations have been entered for both. The destinations for all these forwards

can be either an internal number or an external number.

0 = FORWARD CANCEL 3 = NO ANSWER

1 = ALL CALL 4 = BUSY/NO ANSWER

2 = BUSY 5 = FORWARD DND

6 = FOLLOW ME

0 = FORWARD CANCEL This option will cancel any call forwarding set in MMC 102. It

will not remove the programmed destination and will not

override any preset forward settings in MMC 316.

1 = ALL CALL This option, when set, will forward all calls to the

programmed destination. If the programmed destination is a

station then that station can call the forwarded station to put

calls through.

2 = BUSY This option, when set, will forward calls to the programmed

destination when the forwarded keyset is busy.

3 = NO ANSWER This option, when set, will forward calls to the

programmed destination if the forwarded station does

not answer a call before the forward no answer timer in

MMC 502 expires.

4 = BUSY/NO ANSWER This option will activate both the BUSY option and the NO

ANSWER option at the same time.

5 = FWD DND This option will forward all calls to the programmed

destination whenever the forwarded station goes into DND.

6 = FOLLOW ME This option will forward all calls from another station to this

one.

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.7

ACTION DISPLAY

1. Press the transfer key followed by 102

Display shows

[201] FORWARD

0:FORWARD CANCEL

2. Dial 0 – to select forward type

[201] FORWARD

1:ALL CALL:NONE

Press UP or DOWN to select forward type and

press RIGHT soft key to move cursor

3. Dial destination number (e.g., 201)

[201] FORWARD

1:ALL CALL:205

Press UP or DOWN to select destination and

press RIGHT soft key to move cursor

4. Dial 1 for YES, 0 for NO

[201] FORWARD

CURENTLY SET :YES

Press UP or DOWN to select YES or NO and

press RIGHT soft key to return to step 2

5. Press the transfer key to store and exit

Home Page

OfficeServ 7030 USER INSTRUCTIONS

TECHNICAL MANUAL PART 1 MAY 2010

1.8

1.5 SETTING YOUR ANSWER MODE

Each keyset can have its answer mode for intercom calls set to one of the following options:

RING MODE—The station will ring in one of eight custom ring patterns. Calls are answered by

pressing the ANS/RLS key or lifting the handset.

AUTO ANSWER MODE—After giving a short attention tone, the station will automatically

answer calls on the speakerphone. When a C.O. line is transferred to a station in Auto Answer,

the screened portion of the call will be Auto Answer, but the keyset will ring when the transfer

is complete if the user has not pressed the ANS/RLS key or lifted the handset.

VOICE ANNOUNCE—The station will not ring. After a short attention tone, callers can make an

announcement. The called party must press the ANS/RLS key or lift the handset to reply.

ACTION DISPLAY

1. Press the transfer key followed by 103

Display shows

[201] ANS MODE

RING MODE

2. Dial 0, 1or 2to change the ring mode, e.g., 2

[201] ANS MODE

VOICE ANNOUNCE

Press UP or DOWN to select the ring mode

3. Press the transfer key to store and exit

Home Page

Andere Handbücher für SMT-i5243

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Telefonsystem Handbücher

Samsung

Samsung DCS-816 Technisches Datenblatt

Samsung

Samsung OfficeServ 7200 Bedienungsanleitung

Samsung

Samsung DCS-408 Bedienungsanleitung

Samsung

Samsung OfficeServ 7200 Bedienungsanleitung

Samsung

Samsung DCS 400SI Bedienungsanleitung

Samsung

Samsung OfficeServ 7400 Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungsanleitung

Samsung

Samsung iDCS 500 Bedienungsanleitung

Samsung

Samsung OFFICESERV 500 Series Bedienungs- und Wartungsanleitung

Samsung

Samsung NX-828 Bedienungsanleitung

Samsung

Samsung iDCS 100 Bedienungsanleitung

Samsung

Samsung DCS 50si Bedienungsanleitung

Samsung

Samsung iDCS 500 Bedienungsanleitung

Samsung

Samsung OFFICESERV 7100 Bedienungsanleitung

Samsung

Samsung OFFICESERV 100 Series Bedienungsanleitung

Samsung

Samsung DCS-816 Bedienungsanleitung

Samsung

Samsung OfficeServ 7200 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ 12 Bedienungs- und Wartungsanleitung

Samsung

Samsung OfficeServ 7200 Bedienungsanleitung

Samsung

Samsung DS 616 Bedienungsanleitung

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung OfficeServ 7000 Series Bedienungsanleitung

Samsung

Samsung DCS Bedienungsanleitung

Samsung

Samsung iDCS 500 Bedienungs- und Wartungsanleitung

Beliebte Telefonsystem Handbücher anderer Marken

Teleco

Teleco Perfect Voice Tis 16 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

Tynetec

Tynetec Advent xt Bedienungsanleitung

Ericsson

Ericsson DCT1800-S Bedienungsanleitung

NEC

NEC Electra Elite 192 Bedienungsanleitung

Alcatel

Alcatel EASY REFLEXES 4200 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Bticino

Bticino PABX 28D Bedienungsanleitung

NEC

NEC SL 2100 Bedienungsanleitung

Sonifex

Sonifex Phone In 6 Bedienungsanleitung

TransTel Communications

TransTel Communications TD-824i Montageanleitung

Nortel

Nortel BCM50 Produkthandbuch

Panasonic

Panasonic KX-TS25B Bedienungsanleitung

ASCOM

ASCOM TD 92375GB Betriebsanleitung

Karel

Karel MS26S Produktinformationsblatt

EnGenius

EnGenius DuraFon PRO Bedienungsanleitung

Teledat

Teledat X130 DSL Bedienungsanleitung

SpectraLink

SpectraLink MOG400 Bedienungsanleitung