Sangean PR-D7 Bedienungsanleitung

PR-D7

Version 1

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with

the instructions.

Do not install near any heat sources such as radiators, heat reg-

isters, stoves or other apparatus (including ampliers) that pro-

duce heat.

Do not defect the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet –

USA version only.

Important Safety Instructions

Protect the power cord from being walked on or pinched par-

ticularly at plug, convenience receptacles, and the point where

they exit from the apparatus.

Only use attachments/accessories specified by the manufac-

turer.

Use only with the cart, stand, tripod, bracket, or table specied

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused

for long periods of time.

Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

To reduce the risk of re or electric shock, Do not expose this

appliance to Rain or Moisture.

The Shock Hazard Marking and Associated Graphical Symbol

is provided on the bottom panel of unit.

Apparatus shall not be exposed to dripping or splashing and no

objects lled with liquids, shall not be placed on the apparatus.

10.

11.

12.

13.

14.

15.

16.

17.

Controls

Speaker

Band Selection

LCD Display

Charge LED indicator

Alarm by radio

Alarm by buzzer

Power/Auto shut off button

Volume Control

Tuning Control

Station Scan and Time Set

Station Presets

Battery Compartment

FM Telescopic Antenna

Headphone socket

DC In socket

LCD Display

Radio Band

Station Frequency

Sleep and Snooze

Clock Set

Clock

Buzzer Alarm

Radio Alarm

Frequency unit

Preset Station

Battery Power Indicator

Battery operation using alkaline batteries

1. Remove the battery cover on the back of the unit by sliding the

cover in the direction of the arrow.

2. Insert 6 x AA ( UM3, LR6 ) alkaline batteries into the spaces in

the compartment. Take care to ensure the batteries are inserted

with correct polarity as shown inside the battery compartment.

3. Slide the battery switch to the Alkaline position and then replace

the battery cover.

Important:

when using alkaline batteries, the battery switch must be placed in

the alkaline position. Failure to do so could result in serious

damage to the batteries or radio.

Reduced power, distortion and a “ stuttering “ sound are all signs

that the batteries may need replacing.

If the radio is not to be used for any extended of time, it is recom-

mended that the batteries are removed from the radio.

We would suggest for economy that the radio is used via the sup-

plied AC power adaptor whenever possible, with battery operation

for occasional or stand-by use only. If extended listening using an-

ticipated, then the use of rechargeable batteries is suggested.

Battery operation using rechargeable batteries

1. Remove the battery cover on the back of the unit by sliding the

cover in the direction of the arrow.

2. Insert 6 x rechargeable AA ( UM3 ) batteries into the spaces in

the compartment. Take care to ensure all batteries are inserted

with the correct polarity as shown inside the battery compartment.

The radio is designed to be used with Nickel Metal Hydrive

(NiMH) rechargeable batteries.

3. Slide the battery switch to the Rechargeable position and then

replace the battery cover.

4. Insert the supplied AC power adaptor into the DC IN socket on

the left hand side of the radio and plug the adaptor into a standard

13A mains socket outlet.

5. The charge light will flash indicating batteries are charging.

Batteries will be fully charged in around 7 hours while charge

LED will stop ashing.

Important:

when using rechargeable batteries, the battery switch must be

placed in the Rechargeable position. Batteries will only be charged

when the radio is switched off and connected to the AC adaptor.

6. Reduced power, distortion and a “ stuttering “ sound are all signs

that the batteries may need recharging. Charge LED will be

lighted when batteries have no power to turn on the radio.

7. If the radio is not to be used for any extended period of time, it is

suggested that the batteries are removed from the radio.

Note:

Please be aware that the rechargeable battery undergoes a time of

charging and discharging, the battery capacity will gradually decline

during over time with repeated use. The battery icon shows the re-

maining battery life on the LCD screen when the radio is turned on.

In addition, the calculation of charging time is based on the capac-

ity of the rechargeable battery and charging current power output

of the charger. The two examples in the below table are for your

reference only.

PR-D7(p6)

Size Model Capacity

(mAh)

Charging Current

(mA)

Charging Time

(hrs)

AA GP2700 2600 Approx. 350 Approx. 7.5

GP1800 1800 350 5

Using the supplied AC power adaptor

The supplied AC adaptor is 12 Volts DC output 500 mA center pin

positive.

1. Insert the adaptor plug into the DC IN socket on the left hand side

of the radio.

2. Plug the adaptor into a standard 13A mains socket outlet. Whenever

the adaptor is plugged into the radio and switched on the mains,

the batteries are automatically disconnected.

If the adaptor is plugged into the radio but not the mains is not

switched on then the radio will run from the batteries if tted.

The AC adaptor should be disconnected from the mains supply and

the radio when not is use.

Setting the clock

1. Clock can be set either the radio is power on or off.

2. Display will show “ - : - - “ when the batteries are installed when

the radio is connected to the mains supply.

3. Press and hold the button for more than 2 seconds, display

will ash time set symbol and also the hour digit, followed

by a beep.

4. Press Tuning Up/Down to set required hour.

5. Press button again, the minute digits will ash.

6. Press Tuning Up/Down to set required minute.

7. Press button to complete time setting.

Operating the radio

This radio is equipped with three tuning methods – Scan tuning,

Manual tuning and Memory presets recall.

Scan tuning

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button. For

FM band fully extend and rotate telescopic aerial to get best

reception. For AM ( MW ) band, rotate the radio to get best signal.

3. Press and release Scan button ( long press Scan button more

than 2 seconds will activate time setting ), the radio will up search

and stop automatically when it nds a radio station with good signal.

Press the Scan button again to pick up the found station.

The radio will continue to search next available stations if you do

not press Scan button again when it nds a radio station.

4. Rotate the Volume Control to get required sound level.

5. To turn off the radio, press the Power button. Display will show

OFF.

Andere Handbücher für PR-D7

Inhaltsverzeichnis

Andere Sangean Tragbares Radio Handbücher

Sangean

Sangean ATS-505P Bedienungsanleitung

Sangean

Sangean DT-120CL Bedienungsanleitung

Sangean

Sangean ATS-606 Bedienungsanleitung

Sangean

Sangean ATS-606A Bedienungsanleitung

Sangean

Sangean PR-D4W Bedienungsanleitung

Sangean

Sangean ATS-808A Bedienungsanleitung

Sangean

Sangean LUNCHBOX Betriebsanleitung

Sangean

Sangean PR-D8 Bedienungsanleitung

Sangean

Sangean SR-2 - DATASHEET 2 Bedienungsanleitung

Sangean

Sangean DT-180 Bedienungsanleitung

Sangean

Sangean ATS-606AP Bedienungsanleitung

Sangean

Sangean WR-2 Bedienungsanleitung

Sangean

Sangean MMR-99DAB Bedienungsanleitung

Sangean

Sangean PR-D12 Bedienungsanleitung

Sangean

Sangean DT-110CL Bedienungsanleitung

Sangean

Sangean ATS-818ACS Bedienungsanleitung

Sangean

Sangean DT-220A Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean PR-D3L Bedienungsanleitung

Sangean

Sangean PT 10 Bedienungsanleitung

Sangean

Sangean PR-D14USB Bedienungsanleitung

Sangean

Sangean DT-210 Bedienungsanleitung

Sangean

Sangean DT-200X Bedienungsanleitung

Sangean

Sangean WFR-27C Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung