Sangean Sangean- RCR-3 Bedienungsanleitung

RCR-3

Version 1

DGB

Read and understand all safety and operating instructions before

the radio is operated.

Retain instruction: The safety and operating instructions should

be retained for future reference.

Heed warnings. All warnings on the appliance and operating

instructions should be followed.

Follow all operations and use instructions.

Water and moisture: The appliance should not be used near

water. Do not use near a bathtub, washbowl, laundry tub, kitchen

sink, wet basement, swimming pool, etc.

Unplug the radio from the AC power outlet before cleaning. Use

only a damp cloth for cleaning the exterior of the radio.

Do not place the radio on an unstable cart, stand, bracket or

table. The radio may fall, causing serious personal injury and

damage to the radio.

Ventilation: This radio should be situated so that its location

or position does not interfere with its proper ventilation. For

example, the radio should not be used on a bed, sofa, rug or

other soft surfaces that may block the ventilation openings. It

should not be placed in a built-in situation like a cabinet that may

reduce air ow through the ventilation openings.

Important safety instructions

Power sources: The radio should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

radio dealer or power company.

Power cords: The power cord should be positioned so it is not

walked on, pinched, or items placed on top of it. Pay particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the unit. Unplug the power cord by

gripping the power plug, not the cord. Operate the radio using

only the current type of power source indicated. If you are not

sure of the type of power supply to your home, consult your

dealer or local power company.

Do not overload wall outlets or extension cords. This can result

in a risk of re or electrical shock. Never insert objects of any

kind into the radio through opening. The objects may touch

dangerous voltage points or short out parts. This could cause a

re or electrical shock.

If the radio is left attended and unused for long periods of time,

unplug it form the wall outlet. This will prevent damage caused

by lightning or power line surges.

Do not attempt to service the receiver yourself. Removing the

cover may expose you to dangerous voltage, and will void the

warranty. Refer all servicing to authorized service personnel.

10.

11.

12.

13.

Object and Liquid Entry-Never push objects of any kind into this

radio through opening as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind of product.

The appliance should be serviced by qualified service

personnel when:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen or liquid had been spilled into the radio.

C. The radio has been exposed to rain or water.

D. The radio does not appear to operate normally or exhibits a

marked change in performance.

E. The radio has been dropped, or the enclosure damaged.

14.

15.

Controls

Info / Menu button

Preset button

Tuning up / down button / Snooze button

Band / Select button

Nap button

Alarm 3 button

Alarm 1 button

Date set button

Time set button

Power button / Sleep timer

Display

Alarm 2 button

Alarm 4 button

Light button

Clock

Reset button

Alarm sound level control

Light level control

Headphone socket

Volume control

Tone control

Aux in socket

Main power socket

Display

Time and frequency indicator

Radio-controlled time signal

RDS indicator

Stereo indicator

Alarm 1 with buzzer alarm indicator

Alarm 1 with radio alarm indicator

Alarm 2 with buzzer alarm indicator

Alarm 2 with radio alarm indicator

Alarm 3 with buzzer alarm indicator

Alarm 3 with radio alarm indicator

Alarm 4 with buzzer alarm indicator

Alarm 4 with radio alarm indicator

Sleep / Snooze indicator

Nap indicator

Using the clock radio for the rst time

1. Place your clock radio on a at surface.

2. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is straight as possible extending

either above or below the radio.

3. Insert the adaptor plug into the AC socket located on the rear of

your clock radio. The display will show "time zone" for a few

seconds and then the display will ask you to set your time zone.

To set the time zone, press the Tuning up/down button and the

Select button to conrm. The clock hands will then move to 12:00

and _ _: _ _ will show on the display. The radio will scan for signal

and if a signal is found and received completely it will then show

on the screen without ashing. Now the radio will show both

the current time and the clock hands will then move to show the

correct time.

4. If no signals are found, will be ashing on the display. It may

be necessary to relocate your clock radio to a position giving

better reception.

IMPORTANT:

The mains adaptor is used as the means of connecting the clock

radio to the mains supply. The mains socket used for the clock

radio must remain accessible during normal use. In order to

disconnect the radio from the mains completely, the mains adaptor

should be removed from the mains socket outlet completely.

Characters appearing on the LCD display indicates the clock radio

is connected to and powered from the mains supply.

Clock

Manual clock setting (only if automatic setting fails)

1. Press and hold the TIME button to enter the clock setting, and

the hour digits will ash on the display.

2. Press the TUNING up or down button to adjust the hours. Then

press the BAND / SELECT button to confirm the setting. The

minute digits will ash on the display.

3. Press the TUNING up or down button to adjust the minutes.

Then press the BAND / SELECT button to conrm the setting.

Now the clock setting is completed.

Manual date setting (only if automatic setting fails)

1. Press and hold the DATE button to enter the date setting and

then the year digits will ash.

2. Press the TUNING up or down button to adjust the year. Then

press the BAND / SELECT button to confirm the setting. The

month digits will ash.

3. Press the TUNING up or down to adjust he month. Then press

the BAND / SELECT button to conrm the setting. The date digits

will ash.

4. Press the TUNING up or down button to adjust the date. Then

press the BAND / SELECT button to conrm the setting. Now the

time setting is completed.

Change 12/24 hour clock format

1. Press and hold INFO/MENU button to enter the setting.

2. Press the TUNING up or down button until ‘CLOCK 24H’ is

highlighted on the display. Press the BAND/SELECT button to

enter the setting.

3. Press the TUNING up or down button to choose 12/24 hour

clock format. Press BAND/SELECT button to conrm the setting

D.S.T. (Daylight Saving Time)

1. Press and hold the INFO/MENU button to enter the menu setting.

2. Press the TUNING up or down button until ‘DST OFF’ is appeared

on the display. Press the BAND/SELECT button to enter the setting.

3. Press the TUNING up or down button to choose ‘+1H’ (activated

D.S.T.) or ‘OFF’. Then press the BAND/SELECT button to conrm

the setting.

Andere Handbücher für Sangean- RCR-3

Inhaltsverzeichnis

Andere Sangean Tragbares Radio Handbücher

Sangean

Sangean DT-220A Bedienungsanleitung

Sangean

Sangean PR-D7 Bedienungsanleitung

Sangean

Sangean DT-220V Bedienungsanleitung

Sangean

Sangean PR-D1 Bedienungsanleitung

Sangean

Sangean WFR-27C Bedienungsanleitung

Sangean

Sangean ATS-404 Bedienungsanleitung

Sangean

Sangean WR-2 Bedienungsanleitung

Sangean

Sangean PR-D12 Bedienungsanleitung

Sangean

Sangean MMR-77 Bedienungsanleitung

Sangean

Sangean ATS-606AP Bedienungsanleitung

Sangean

Sangean WR-12BT Bedienungsanleitung

Sangean

Sangean DT-200V Bedienungsanleitung

Sangean

Sangean U-1 Bedienungsanleitung

Sangean

Sangean FATBOX Bedienungsanleitung

Sangean

Sangean ATS-818 Bedienungsanleitung

Sangean

Sangean DT-120 Bedienungsanleitung

Sangean

Sangean DT-110CL Bedienungsanleitung

Sangean

Sangean PR-D5CL Bedienungsanleitung

Sangean

Sangean WR-11BT Montageanleitung

Sangean

Sangean PR-D14USB Bedienungsanleitung

Sangean

Sangean PR-D17 Bedienungsanleitung

Sangean

Sangean ATS-606 Bedienungsanleitung

Sangean

Sangean DPR-17 Bedienungsanleitung

Sangean

Sangean DT-110 Betriebsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung