Sangean WR-1 Bedienungsanleitung

WR-1

Version 1

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5.Do not use this apparatus near water.

6. Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9.Do not defeat the safety purpose of the polarized or

grounding-type plug.Apolarized plug has two blades with one

wider than the other.Agrounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your

outlet. consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged. liquid has

been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. To Reduce the Risk of Fire or Electric Shock, Do not Expose

This Appliance To Rain or Moisture.

16. The Shock Hazard Marking and AssociatedGraphical Symbol is

provided on the bottom panel of unit.

17.Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, shall not be placed on the apparatus.

18. Excessive sound pressure on ear- and headphones could

impair the hearing ability. Higher setting that idle on the

equalizer leads to higher signal voltages on the output for

ear and headphones.

Features

(1)AM/FM 2 bands.

(2) Wooden cabinet made of MDF in real cherry or walnut or other

optional wood veneer.

(3) Soft and precision tuning.

(4)Rotary tuning and volumecontrol.

(5) Tuning LEDindicator.

(6)Detachable power cord.

(7) Headphone socket.

(8) REC out socket can be used as a separate tuner to the

Hi-Fi amplifier or record the radio program by using the output .

(9)Aux in. socket to connect stereo/mono audio source like

CD walkman.

(10) 3 inches 7Wfull range heavy-duty magnet speaker.

(11) Dynamic Bass compensation for rich bass.

(12) ExternalAM antenna terminal to connect outdoorsAM antenna

(USA version only).

(13) External F type FM antenna terminal to connect outdoors

FM antenna.

(14) Internal/External FM antenna switch to select built-in or

external antenna.

(15) 9-14 voltages power adaptor socket forAC adaptor or

vehicle/boat power.

DC 12 V 1A

910 811

3 2

Controls

Power andAM/FM band switch

Volume Control

Speaker

Dial scale

Dial indicator

Tuning Control

AC power cord socket

12VDC input socket ( ideal for vehicles/boats )

Headphone socket

REC out socket

Aux in socket

External/Internal antenna switch

F-type external antenna terminal

AM external antenna terminal (USAversion only )

Tuning LEDindicator

Power your radio

AC operation

Before you plug theAC cord into the radio, be sure theAC voltage is

correct. Insert the plug on the end of the supplied power cord into the

AC power socket on the back of the radio.

DC operation

For outdoors use, you can power the radio by using 12VDC input

socket from aDC power supply (example, from the power supply of

vehicles or boats). AnAC power adaptor with 1Ampere and center

positive in polarity can also power the radio in house.

Operating your radio FM

1. Connect theAntenna

The radio comes with built-inAM/FM antenna. To improve

FM reception, insert the end of the supplied FM wire antenna into

the F-type antenna terminal and adjust the wire for best reception.

A75 ohm coaxial cable of outdoor antenna may also be attached

to the terminal. Be sure to switch external/internal antenna switch to

external position while using the supplied wire antenna or connect

the outdoor antenna. In some of the European countries, you may

have to connect the supplied antenna terminal adaptor to connect

withthe outdoorantenna.

2. Turn on your radio by switching the Power knob to FM position.

3. Rotate the Tuning Control to select the desired station. On FM,

the tuning scale is marked in MHz (Megahertz).The tuning

LEDindicator will appear brightest when best tuning has

been achieved.

4.Adjust theVolume Control for comfortable listening.

5. To switch off the radio , turn the Power knob to OFF position.

Operating your radio AM

1. Connecting the antenna

The radio comes with built-inAM antenna which should be

enough for normal listening.To improve theAM reception,

you may connect the outdoorAM antenna withAM antenna

terminal(USA version only).

2. Turn on your radio by switching the Power knob toAM position.

3. Rotate the Tuning Control to select the desired station. OnAM,

the tuning scale is marked in kHz (Kilohertz). The tuning LED

will appear brightest when best tuning has been achieved.

4. Rotate your radio for best reception.

5.Adjust theVolume Control for comfortable listening.

6. To switch off your radio , turn the power knob to OFF position.

Headphone use

Headphone use with this radio should be fitted with a 3.5 mm jack

plug. Insert the headphones plug into the socket marked on the

rear side of the radio. When the headphones are plugged in, the

loudspeaker is automatically disconnected.

AUX IN socket

Connect a stereo or mono audio source (like CDwalkman) to this

input to listen the audio program via the speaker.

REC out socket

The radio can be used as a separate tuner by connecting this input to

Hi-Fi system (amplifier) or using this input to make recording in mono

from audio program.

Specifications

Frequency Coverage:

FM 87.50 - 108 MHz

AM 520 - 1710 kHz

Power:AC 120 V/60 Hz/25W orAC 230 V/50 Hz/25W

InternalAntennaSystem:

AM Built-in ferrite aerial

FM Built-in wire aerial

Externalantennaterminal:

AM antenna terminal (USAversion only)

FM F-type antenna terminal

Output Power: 7W 10% T.H.D. @100Hz

Headphones socket:

3.5 mm dia. Stereo jack monaural output

Output : 5mW + 5mW

Andere Handbücher für WR-1

Inhaltsverzeichnis

Andere Sangean Tragbares Radio Handbücher

Sangean

Sangean ATS-606AP Bedienungsanleitung

Sangean

Sangean ATS-909X - WORLD BAND RADIOS Benutzerhandbuch

Sangean

Sangean U-3 Bedienungsanleitung

Sangean

Sangean PR-D5CL Bedienungsanleitung

Sangean

Sangean ProTravel PT10 Benutzerhandbuch

Sangean

Sangean PR-D5CL Bedienungsanleitung

Sangean

Sangean ATS-505P Bedienungsanleitung

Sangean

Sangean DT-220V Bedienungsanleitung

Sangean

Sangean ATS-505P Bedienungsanleitung

Sangean

Sangean WFR-32 Bedienungsanleitung

Sangean

Sangean ATS-404 Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean DT-200X Bedienungsanleitung

Sangean

Sangean PR-D14USB Bedienungsanleitung

Sangean

Sangean ATS-818ACS Bedienungsanleitung

Sangean

Sangean DT-210 Bedienungsanleitung

Sangean

Sangean DPR-32 Bedienungsanleitung

Sangean

Sangean PR-D1 Bedienungsanleitung

Sangean

Sangean PR-D8 Bedienungsanleitung

Sangean

Sangean ATS-606A Bedienungsanleitung

Sangean

Sangean PT 10 Bedienungsanleitung

Sangean

Sangean H201 Bedienungsanleitung

Sangean

Sangean ATS-505P Bedienungsanleitung

Sangean

Sangean FATBOX Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung