Sanus Systems VMAV Bedienungsanleitung

Assembly Instructions for Model: VMAV

Thank you for choosing a Sanus Systems VisionMount™ VMAV. The VMAV is designed to hold a VCR, DVD player, cable box, satel-

lite receiver or stereo component weighing up to 45 lbs.

Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a quali-

ed contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective

parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replace-

ment parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper instal-

lation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied by Sanus Systems.

Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call

Sanus Systems before returning products to the point of purchase.

Required Tools: Drill, 1/4” drill bit and a socket set

Supplied Parts and Hardware: Some parts not shown as actual size*

(1) Wall Plate - a* (1) Cover - b* (1) Tube - c* (2) Cap - d

(4) Foot - e (4) Lag Bolt - f (2) Set Screw - g (1) Allen Key - h

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.13.05

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Step 1: Attach Wall Plate

The Wall Plate (a) must be mounted to a wood

stud. Make sure the Wall Plate is oriented so that

the at side is against the wall as shown in Diagram

1. Use the Wall Plate as a template to mark the 4

hole locations for the Lag Bolts (f) between the two

edges of the chosen stud. Pre-drill four holes 2.5”

deep at the marked locations using a 1/4” drill bit.

Attach the Wall Plate to the wall using all 4 of the

Lag Bolts as shown in diagram 1. Tighten each Lag

Bolt with the appropriate socket head.

WARNING: Tighten Lag Bolts (f) only until the

Wall Plate (a) is pulled rmly against the wall. DO

NOT OVER-TIGHTEN THE LAG BOLTS!

Diagram 1

Step 2: Add Cover

Slide the Cover (b) so it clips onto the Wall Plate

(a). See Diagram 2 for assistance.

Step 3: Add Feet and Caps

Press t a Foot (e) into each of the 4 holes in the top

portion of the Tube (c). Press t a Cap (d) into each

end of the Tube. See Diagram 3 For assistance.

Step 4: Install Tube

Insert the Tube (c) into the Wall Plate (a). Insert a

Set Screw (g) into each hole in the Wall Plate as

shown in the Detailed View of Diagram 4. Tighten

each Set Screw rmly with the Allen Key (h).

Diagram 4

Diagram 2

Diagram 3

Detailed View

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7.13.05

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Inhaltsverzeichnis

Andere Sanus Systems Rack & Stand Handbücher

Sanus Systems

Sanus Systems VisionMount VMCA7 Bedienungsanleitung

Sanus Systems

Sanus Systems VM2 Bedienungsanleitung

Sanus Systems

Sanus Systems SANA1A Bedienungsanleitung

Sanus Systems

Sanus Systems WMS3 Bedienungsanleitung

Sanus Systems

Sanus Systems MF110 Bedienungsanleitung

Sanus Systems

Sanus Systems VisionMount VMAA26 Bedienungsanleitung

Sanus Systems

Sanus Systems HTSAT Bedienungsanleitung

Sanus Systems

Sanus Systems New Foundations 100 Series Bedienungsanleitung

Sanus Systems

Sanus Systems PFV36SB-01 Installationsanleitung

Sanus Systems

Sanus Systems PFV59S Installationsanleitung

Sanus Systems

Sanus Systems PFV60-B1 Bedienungsanleitung

Sanus Systems

Sanus Systems VISIONMOUNT VMCA8 Bedienungsanleitung

Sanus Systems

Sanus Systems Wall Mount LL22 Bedienungsanleitung

Sanus Systems

Sanus Systems FM37 Bedienungsanleitung

Sanus Systems

Sanus Systems VMPL50 Bedienungsanleitung

Sanus Systems

Sanus Systems PFFP Bedienungsanleitung

Sanus Systems

Sanus Systems VM400 Bedienungsanleitung

Sanus Systems

Sanus Systems WMS5 Bedienungsanleitung

Sanus Systems

Sanus Systems WMS3 Bedienungsanleitung

Sanus Systems

Sanus Systems SD115 Bedienungsanleitung

Sanus Systems

Sanus Systems VMCA9 Bedienungsanleitung

Sanus Systems

Sanus Systems Sanus VisionMount LC1A Bedienungsanleitung

Sanus Systems

Sanus Systems VisionMount MT25 Bedienungsanleitung

Sanus Systems

Sanus Systems VMUC1 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung