Sanus A701 Bedienungsanleitung

Sanus Systems

2221 Hwy 36 West

Saint Paul, MN 55113 USA

Customer Service

Americas: 800-359-5520 • 651-484-7988 • [email protected]om

Europe, Middle East, and Africa: + 31 40 2324700 • eur[email protected]om

Asia Paciﬁc: 86 755 8996 9226 • sanus.ap@milestone.com

accents.sanus.com

All other brand names or marks are used for identiﬁcation purposes and are trademarks of their respective owners.

A701

(6904-002018 <00>)

3 mm

(1/8 in.)

Wood Stud

12 mm

(7/16 in.)

6 mm

(15/64 in.)

2.4 mm

(3/32 in.)

6904-002018 <00>

Thank you for purchasing the ELM701 anti-tip strap. Installing this product is as easy as 1 - 2 - 3!

1. Attach to the TV.

2. Attach to the furniture.

3. Optional - Attach to the wall.

See manual for more detailed instructions.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

6904-002018 <00> 3

Wood stud walls Tools required CAUTION / WARNING Loosen/Tighten Heavy! Assistance Required.

WARNING: This product contains small items that could be a

choking hazard.

CAUTION: Avoid potential personal injuries and property damage!

Do not use this product for any purpose not explicitly specied by manufacturer.

This product is designed for use in wood frame walls only!

If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer

Customer Service or call a qualied contractor.

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

CAUTION:

6904-002018 <00>

Supplied Parts and Hardware

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer

Service. Never use damaged parts!

NOTE:

Not all hardware included will be used.

M8 x 40mm

M4 x 30mm

M6 x 35mm

M5 x 30mm

M4 / M5 M6 / M8

1/4 x 2.0 in. 1/4 in.

#10 x 1 in.

1/4-20

[08] x 2 [09] x 2

[10] x 2 [11] x 2

[12] x 2 [13] x 2 [14] x 2 [15] x 2

[04] x 2

[05] x 1 [06] x 1 [07] x 1

[01] x 1 [02] x 1

[03] x 2

6904-002018 <00> 5

CAUTION:

Attach TV Supports (T) to TV

1. Hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M5, M6, or M8).

2. Attach TV supports (T) using one of the M4, M5, M6, or M8 screw, washer, spacer combinations shown.

CAUTION: Avoid potential personal injuries and property damage!

TV supports (T) must be attached to the to bottom most mounting holes on the back of your TV.

Do not use screws without spacers.

Standard congurations are shown. For special applications, or if you are uncertain about your hardware selection, contact Customer Service.

(T)

[14] [14]

[15] [15]

[12] [12]

[13] [13]

[08] [09]

[10] [11]

[01] [01]

[01]

(T)

6904-002018 <00>

Attach the Mounting Plate (P) to Furniture

If you are attaching the anti-tip strap to compatible furniture, see step 2-1.

If you are attaching the anti-tip strap to wood furniture that is at least 26 mm (1 in.) thick, see step 2-2.

If you are attaching the anti-tip strap to metal furniture that is at least 3 mm (1/8 in.) thick, see step 2-3.

6904-002018 <00> 7

(P)

(S)

(P)

[05]

2-1

If you are attaching the anti-tip strap to compatible furniture:

1. Place the mounting plate (P) over the threaded insert on the back of the furniture.

2. Insert and tighten screw [05].

CAUTION:

To avoid potential injuries or property damage!

Ensure mounting plate (P) is securely fastened to the furniture.

Ensure all straps (S) are tight.

CAUTION:

6904-002018 <00>

2-2

If you are attaching the anti-tip strap to wood furniture:

1. Locate a secure area near the top of the furniture that is at least 26 mm (1 in.) thick.

2. Drill pilot hole to a depth of 26 mm (1 in.) using a 2.4 mm (3/32 in.) diameter drill bit.

3. Place the mounting plate (P) over the drilled hole on the back of the furniture. Insert and tighten screw [06].

CAUTION:

To avoid potential injuries or property damage!

Ensure mounting plate (P) is securely fastened to the furniture.

Ensure all straps (S) are tight.

CAUTION:

(S)

(P) [06]

(P)

(S)

2.4 mm

(3/32 in.)

6904-002018 <00> 9

2-3

1 2

(S)

(P)

[07]

(P)

(S)

If you are attaching the anti-tip strap to metal furniture:

1. Locate a secure area near the top of the furniture that is at least 3 mm (1/8 in.) thick.

2. Drill pilot hole to a depth of 13 mm (1/2 in.) using a 6 mm (15/64 in.) diameter drill bit.

3. Place the mounting plate (P) over the drilled hole on the back of the furniture. Insert and tighten screw [07].

CAUTION:

To avoid potential injuries or property damage!

Ensure mounting plate (P) is securely fastened to the furniture.

Ensure all straps (S) are tight.

CAUTION:

6 mm

(15/64 in.)

6904-002018 <00>

33 mm

(1/8 in.)

12 mm

(7/16 in.)

[02]

[01]

Attach Wall Plate [02] and Anti-tip Strap [01] to Wood Stud Wall

1. Locate stud. Verify the center of the stud with an awl or thin nail or use an edge to edge stud nder.

2. Level the wall plate [02] and mark the hole locations.

3. Drill pilot holes as illustrated.

4. Tighten the lag bolts [03] only until the washers [04] are pulled rmly against the wall plate [02].

5. Insert the strap hook (H) into the wall plate [02].

6. Rotate the strap hook (H) so that it is perpendicuar to the wall plate [02].

7. Tighten straps (S).

NOTE: If you need to move your funiture, loosen the straps and then unclip the strap hook (H) from the wall plate [02].

CAUTION:

Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Pilot holes must be drilled to a depth of 63.5 mm (2.5 in.), using a 3mm (1/8 in.) diameter drill bit.

Do not over-tighten the lag bolts [03].

Any material covering the wall must not exceed 16 mm (5/8 in.).

CAUTION:

Inhaltsverzeichnis

Andere Sanus Rack & Stand Handbücher

Sanus

Sanus Classic MST15 Bedienungsanleitung

Sanus

Sanus WSECS1-B2 Bedienungsanleitung

Sanus

Sanus CFR1610 Bedienungsanleitung

Sanus

Sanus WMS3 Bedienungsanleitung

Sanus

Sanus VisionMount VLF210 Bedienungsanleitung

Sanus

Sanus VisionMount ML11 Bedienungsanleitung

Sanus

Sanus WSEDH1 Bedienungsanleitung

Sanus

Sanus FSF110 Bedienungsanleitung

Sanus

Sanus CFR115 Bedienungsanleitung

Sanus

Sanus VLL61 Bedienungsanleitung

Sanus

Sanus Secura QML12 Bedienungsanleitung

Sanus

Sanus CFR2100 Series Bedienungsanleitung

Sanus

Sanus VisionMount LF228 Bedienungsanleitung

Sanus

Sanus Sanus VisionMount ML22 Bedienungsanleitung

Sanus

Sanus SAN213 Bedienungsanleitung

Sanus

Sanus F215 Bedienungsanleitung

Sanus

Sanus F107 Bedienungsanleitung

Sanus

Sanus LR1A Bedienungsanleitung

Sanus

Sanus VisionMount VMPR1 Bedienungsanleitung

Sanus

Sanus BSTV2 Bedienungsanleitung

Sanus

Sanus VMA301 Bedienungsanleitung

Sanus

Sanus F11C Bedienungsanleitung

Sanus

Sanus VML5 Bedienungsanleitung

Sanus

Sanus VSTV1 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung