Sanus BLT2 Bedienungsanleitung

BLT

INSTRUCTION MANUAL

WE’RE HERE TO HELP

Our US-based install experts

are standing by to help.

Call us at:

800-359-5520

Or, chat at:

SANUS.com/chatSP

Get it right the ﬁrst time.

HeightFinder™ shows you

where to drill.

Check it out at:

SANUS.com/1172

Want to watch a video that

shows how easy this DIY

project will be?

Watch it now at:

SANUS.com/2513

Texto en español, página 12

GET IT

RIGHT

THE FIRST TIME

Follow this step-by-step

instruction manual to

speed up your installation.

TV Weight Limit

(including accessories)

DO NOT EXCEED

Call Customer Service

Tools Needed

Wall

Construction

ONLY install on

these acceptable

wall types.

Unsure

wood studs Solid concrete or

concrete block Steel studs

ACCEPTABLE ACCEPTABLE

Steel stud kit SSMK1

is required for install,

but NOT INCLUDED.

Call Customer Service

Wood Stud

Install

Steel Stud

Install

Concrete

Install

Awl Awl

Pencil Level Tape

Stud Finder Stud Finder

ScrewdriverTape

Measure

7/32 in.

(5.5 mm)

Wood

1/2 in.

(13 mm)

Steel

Drill Bit Drill Bit

Electric

Drill

Hammer

1/2 in.

(13 mm)

Socket

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

CAUTION:

DO NOT install

in drywall alone

150 lbs.

(68.0 kg) 110 lbs.

(49.8 kg)

For wood stud and

Solid Concrete or

Concrete Block Walls

For Steel

Stud Walls

Drywall alone

will NOT hold

the weight

of your TV.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of

this product, contact Customer Service.

CAUTION: Avoid potential personal injuries and property damage!

●This product is designed ONLY to be installed into wood stud, solid concrete or concrete block or steel stud walls.

— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.

●This product is designed for INDOOR USE ONLY.

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined.

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer.

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

If your TV, plus accessories, weighs MORE

than indicated, this mount is NOT compatible.

Visit SANUS.com or call customer service to

ﬁnd a compatible mount.

BEFORE YOU BEGIN

Remove the stand from

your TV — if attached. Install any accessories you may

have purchased, if they requireTV removal

prior to assembly. The TV is removable for

future accessory purchases.

Soft clean surface

Protect the face of your TV

when laying it down for installation.

Dimensions in. [mm]

600mm

23.62in

430mm

16.93in

200mm

7.87in

668mm

26.30in

762mm

30.00in

241.3mm

9.50in

177.8mm

7.00in

8.4mm

.33in

406.4mm

16.00in

609.6mm

24.00in

600mm

23.62in

450mm

17.72in

460mm

18.11in

762mm

30.00in

323.5mm

12.73in

144.8mm

5.70in

69.7mm

2.74in

7deg

12deg

1" HEIGHT ADJUST

69.7mm

2.74in

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

600mm

23.62in

430mm

16.93in

200mm

7.87in

668mm

26.30in

762mm

30.00in

241.3mm

9.50in

177.8mm

7.00in

8.4mm

.33in

406.4mm

16.00in

609.6mm

24.00in

600mm

23.62in

450mm

17.72in

460mm

18.11in

762mm

30.00in

323.5mm

12.73in

144.8mm

5.70in

69.7mm

2.74in

7deg

12deg

1" HEIGHT ADJUST

69.7mm

2.74in

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

600mm

23.62in

430mm

16.93in

200mm

7.87in

668mm

26.30in

762mm

30.00in

241.3mm

9.50in

177.8mm

7.00in

8.4mm

.33in

406.4mm

16.00in

609.6mm

24.00in

600mm

23.62in

450mm

17.72in

460mm

18.11in

762mm

30.00in

323.5mm

12.73in

144.8mm

5.70in

69.7mm

2.74in

7deg

12deg

1" HEIGHT ADJUST

69.7mm

2.74in

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

600mm

23.62in

430mm

16.93in

200mm

7.87in

668mm

26.30in

762mm

30.00in

241.3mm

9.50in

177.8mm

7.00in

8.4mm

.33in

406.4mm

16.00in

609.6mm

24.00in

600mm

23.62in

450mm

17.72in

460mm

18.11in

762mm

30.00in

323.5mm

12.73in

144.8mm

5.70in

69.7mm

2.74in

7deg

12deg

1" HEIGHT ADJUST

69.7mm

2.74in

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

600mm

23.62in

430mm

16.93in

200mm

7.87in

668mm

26.30in

762mm

30.00in

241.3mm

9.50in

177.8mm

7.00in

8.4mm

.33in

406.4mm

16.00in

609.6mm

24.00in

600mm

23.62in

450mm

17.72in

460mm

18.11in

762mm

30.00in

323.5mm

12.73in

144.8mm

5.70in

69.7mm

2.74in

7deg

12deg

1" HEIGHT ADJUST

69.7mm

2.74in

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

Parts and Hardware for STEP 1

22mm

M6 x 12mm M6 x 35mm

2.5mm

5mm

M8 x 25mm M8 x 50mm

M8 x 45mm

M8 x 35mm

M8 x 16mm

M8 x 20mm

Right

TV Bracket

Left

TV Bracket

ATTACH TV BRACKET TO TVSTEP 1

CAUTION: Avoid potential

personal injury or property damage!

The TV brackets contain potential

pinch points during operation.

Keep fingers away from

pinch points when

retracting the TV. (arrows)

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

1.1 Select TV

Screw Diameter

1.2 Select TV Screw Length / Spacers

TV Screws

(qty. 4 each) [Only one size ﬁts your TV] Washers

(qty. 4 each)

Spacers

[If necessary]

(qty. 4 each)

0302

M6/M8 M6/M8

(qty. 1)

TV Bracket

04 04

05 05

02 01

Too Short Too Long Correct

Inset Holes Cables Rounded Back

Only one screw size ﬁts your TV.

M6 M8

• Flat Back TV

[TV brackets

lay ﬂat on your TV]

NO SPACER SPACER NEEDED

• Flat Back TV with

Extra Space Needed

[for deep inset holes

or cable interference]

• Rounded or

Irregular Back TV

[TV brackets NOT

resting ﬂat on your TV]

A B

Use short TV screws 01 .

Spacers 03 not needed. Use long TV screws 01 and spacers 03 to

create extra space between the TV and TV bracket.

CAUTION: Verify adequate thread engagement

with your screw 01 , washer 02 , spacer 03

combination AND TV bracket 04 /05 .

— Too short will not hold your TV.

— Too long will damage your TV.

NOTE: If your TV

included inset spacers or

adapters, use them UNDER

the mount hardware.

05 2SECURELY TIGHTEN

1.3 Attach TV Bracket Assembly to TV

1POSITION

TIP: The tilt tension knob T on TV brackets 04 /05 should be

oriented to the outside edges.

5⁄16 in. x 2 ¾ in.

Fischer UX10 x 60R

Parts and Hardware for STEP 2

Lag Bolt

Wall Plate

Wall Plate Template

Hex Key

3/16 in.

Concrete Anchor

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

ATTACH WALL PLATE TO WALL

STEP 2

02 02

03 01

NO SPACER SPACER NEEDED

A B

(qty. 1)

(qty. 4)

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

Max. 5/8 in. (1.5 cm)

Min. 16 in. (40.6 cm) Min. 3 ½ in. (8.9 cm)

Min. 1 ½ in. (3.8 cm)

CAUTION: Avoid potential

personal injury or property damage!

●Drywall covering the wall

must not exceed 5/8 in. (1.5 cm)

●Minimum wood stud size:

nominal 2 x 4 in. (5.1 x 10.2 cm)

actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)

●Minimum horizontal space

between fasteners:16 in. (40.6 cm)

●Stud centers must be veriﬁed

STEP 2A Wood Stud Installation

1LOCATE 2VERIFY 3MARK

2 ¾ in. (6.9 cm)

7/32 in.

(5.5 mm)

4POSITION TEMPLATE

TIP: To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

sanus.com

/1172

HeightFinder™

Visit 5DRILL

CAUTION:

Be sure you drill into the CENTER of the stud.

Skip to STEP 3 on PAGE 9.

6REMOVE TEMPLATE 7SECURELY TIGHTEN

All four lag bolts 08 MUST BE firmly tightened to prevent

unwanted movement of the wall plate 07 . Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

06 06

Skip to STEP 3 on PAGE 9.

TIP:

TIP: To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

Min. 16 in. (40.6 cm)

1POSITION TEMPLATE

Solid Concrete or Concrete Block Installation

●Mount the wall plate 07 directly onto the concrete surface

●Minimum solid concrete thickness: 8 in. (20.3 cm)

●Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

●Minimum horizontal space between fasteners: 16 in. (40.6 cm)

●For concrete applications, TV brackets 04 /05 must remain

centered in wall plate 07 . Keep this in mind when selecting

the wall plate location

STEP 2B

CAUTION: Avoid potential personal injury or property damage!

sanus.com

/1172

HeightFinder™

Visit

Never drill into the mortar between blocks.

CAUTION:

Never drill into the mortar between blocks.

2DRILL

CAUTION:

All four lag bolts 08 MUST BE firmly tightened to prevent

unwanted movement of the wall plate 07 . Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

CAUTION:

Be sure the anchors 09 are seated ﬂush

with the concrete surface.

CAUTION:

5SECURELY TIGHTEN

3REMOVE TEMPLATE

3/8 in.

(10 mm)

3 in. (7.6 cm)

34 INSERT ANCHORS

Steel Stud Installation Kit SSMK1 (NOT INCLUDED)

Min. 16 in. (40.6 cm)

CAUTION: Avoid potential personal injury

or property damage!

STEP 2C

1LOCATE 2VERIFY 3MARK

●Studs must be at least 2x4 / 25 ga.

●If back side of wall is unﬁnished, drywall must be

installed to a minimum of one stud left and right

of the stud(s) being used to install the mount

●Drywall must be a minimum of 1/2 in. (13

mm) thick on each side of the studs, and a

minimum clearance of 1 ⅞ in. (48 mm)

behind the wall is required

●This product must be centered on the studs

●Stud type and structural strength must conform to

the North American Specification for the Design of

Cold-Formed Steel Structural Members

[362 S 125 18, C-Shape, S - Stud Section]

●Drywall must be secured to studs with screws

12 in. (304.8 mm) on center

1/4-20 x 1 ¾ in.

1/4 in.

S2 x4

1/4-20 SNAP Toggle BB

*Contact Customer Service to inquire about the additional hardware.

1 in. (25 mm)

1/2 in.

(13 mm)

4POSITION TEMPLATE

TIP: To calculate your precise wall plate location, check out

our Height Finder at sanus.com [www.san.us/1172].

www.

san.us/1172

HeightFinder™

Visit 5DRILL

CAUTION:

Be sure you drill into the CENTER of the stud.

Steel Stud Installation

S1 S1

P4X

6INSTALL ANCHORS 7SECURELY TIGHTEN

All four screws S2 MUST BE firmly tightened to prevent

unwanted movement of the wall plate 07 . Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

CAUTION: Be sure cap P is

seated against the drywall surface.

S 3 S2

For CONCRETE APPLICATIONS:

TV brackets 04 / 05 MUST remain centered in wall plate 07 .

CAUTION: Avoid potential personal injury or property damage!

NOTE: For WOOD STUD APPLICATIONS, TV brackets 04 / 05 can

be slid anywhere along wall plate 07 for optimal positioning of your TV.

ATTACH TV TO WALL PLATE

STEP 3

1HANG

HEAVY! You may need

assistance with this step.

2ATTACH

Always make sure TV brackets 04 / 05 are in the locked

position so the TV is securely fastened to the wall plate 07 .

CAUTION: Avoid potential personal injury or property damage!

TIP:

TIP: Extend the TV outward AND tilt the TV up or down to gain better access to the back of the TV.

MANAGE CABLES

ADJUSTMENTS

To level your TV, turn the level

adjustment screw S on the top of

either TV bracket 04 / 05 to raise or

lower that respective side of the TV.

Adjust the height by turning the level

adjustment screw S on the top of

both TV brackets 04 / 05 .

LEVEL

HEIGHT

RAISE

LOWER

TILT

Your TV should adjust easily when

moved, then stay in place.

Adjust the tilt tension knob T if

your TV naturally tilts up or down.

NOTE: If you do not intend to

adjust the tilt for different viewing

locations, you can tighten the

tilt tension knobs T to prevent

unwanted movement.

Inhaltsverzeichnis

Sprachen:

Andere Sanus Rack & Stand Handbücher

Sanus

Sanus FMF319-B2 Bedienungsanleitung

Sanus

Sanus LR1A Bedienungsanleitung

Sanus

Sanus SOA-EDM1 Service-Handbuch

Sanus

Sanus Trillium 63 Bedienungsanleitung

Sanus

Sanus SA808 Bedienungsanleitung

Sanus

Sanus VML41 Bedienungsanleitung

Sanus

Sanus VisionMount ML11 Bedienungsanleitung

Sanus

Sanus WSSMM1 Bedienungsanleitung

Sanus

Sanus F80 Bedienungsanleitung

Sanus

Sanus VSL4 Bedienungsanleitung

Sanus

Sanus SAN213 Bedienungsanleitung

Sanus

Sanus SONOS WSWM Bedienungsanleitung

Sanus

Sanus WSSATM1 Bedienungsanleitung

Sanus

Sanus CAPS27 Bedienungsanleitung

Sanus

Sanus LR1A Bedienungsanleitung

Sanus

Sanus WSS22 Bedienungsanleitung

Sanus

Sanus BFAV344 Bedienungsanleitung

Sanus

Sanus VLF525 Bedienungsanleitung

Sanus

Sanus LL22 Bedienungsanleitung

Sanus

Sanus Sanus VisionMount ML22 Bedienungsanleitung

Sanus

Sanus WSSAWM1 Bedienungsanleitung

Sanus

Sanus VLL10 Bedienungsanleitung

Sanus

Sanus BSTV2 Bedienungsanleitung

Sanus

Sanus FSF110 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung