Sanus LMT1 Bedienungsanleitung

Para Español ver página 14

LMT1

INSTRUCTION MANUAL

Recommended placement Our US-based

install experts

are standing

by to help.

Call us at:

1-855-734-7805

Get it right the

ﬁrst time.

HeightFinder™

shows you

where to drill.

Check it out at:

SANUS.com/2850

Want to watch a

video that shows

how easy this DIY

project will be?

Watch it now at:

SANUS.com/2845

WE’RE HERE TO HELP

80 lbs.

(36.3 kg)

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let’s make sure this mount is perfect for you!

—

Perfect!

Yes

—

This mount is NOT compatible. Visit MountFinder.Sanus.com or call

1-855-734-7805 to ﬁnd a compatible mount.

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service at 1-855-734-7805.

Do you have

all the tools

needed?

What is your

wall made of?

Ready to begin?

Does your TV

(including accessories)

weigh more than

80 lbs. (36.3 kg)?

CAUTION:

DO NOT install

into drywall alone

Unsure?

Drywall with

wood studs? Solid concrete or

concrete block?

Call Customer Service: 1-855-734-7805

Perfect!

CAUTION: Avoid potential personal injuries and property damage!

●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Wood Stud Install

Concrete Install

Awl

Pencil Level Stud Finder

Screwdriver

Tape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric

Drill Hammer

1/2 in.

(13 mm)

Socket

Wrench Drill Bit

3/8 in.

(10 mm)

Concrete

Concrete Installation kit required (not included)

Dimensions

7.87in

200mm

MIN

0.35in

8.8mm

15.75in

400mm

MAX

7.87in

200mm

MIN

15.75in

400mm

MAX

4.75in

120.7mm

15.42in

391.7mm

2.93in

74.4mm

3.91in

99.4mm

0.33in

8.4mm

17.78in

451.6mm

16.93in

430mm

0.38in

9.7mm

OFFSET

7.87in

200mm

LATERAL SHIFT

AT 200 VESA

0.35in

8.8mm

6.50in

165.2mm

2.04in

51.8mm

LEVEL

ADJUST

SCREW

5deg

TIL

10deg

TILT

DOWN

TV INTERFACE

WALL PLATE

FRONT VIEW - LATERAL SHIFT

3-D

SIDE VIEW - TILT

SIDE VIEW

FULLY ASSEMBLED MOUNT

Before getting started, let’s make sure this mount is perfect for you!

Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts

are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.

Never use damaged parts!

NOTE: Not all hardware included will be used.

STEP 1 Parts and Hardware

M6 x 12mm

M6 x 35mm

M6 x 20mm

M4 x 12mm M4 x 35mm

M8 x 16mm M8 x 35mm

M8 x 25mm M8 x 50mm

TV Bracket

TV Screws

(qty. 4 each) [Only one size ﬁts your TV] Washers Spacer

[If necessary]

M6/M8

M4/M6/M8

22 mm

M4/M6/M8

2.5 mm

(qty. 1)

04 (qty. 1)

(qty. 4)

Wall Plate Template Wall Plate

Concrete Installation Kit CMK1 (NOT INCLUDED)

Parts and Hardware for STEP 2

5/16 x 2¾ in.

.695 x .350 x .075 in.

5/16 x 2¾ in.

.695 x .350 x .075 in.

5/16 x 2¾ in.

.695 x .350 x .075 in.

5/16 in.

5/16 x 2 ¾ in.

Contact Customer Service to inquire about the CMK1 Concrete Installation Kit.

Fischer UX 10 x 60R Anchor

M4/M5 M6/M8

M4 x 12mm M8 x 16mm M8 x 20mm

M4 x 35mm

M8 x 35mm

M6 x 12mm

M6 x 35mm

M6 x 20mm

⁄ x2 ⁄ in.

M5 x 12mm

M5 x 35mm

⁄ in.

Lag Bolt

Washer

5/16 x 2¾ in.

.695 x .350 x .075 in.

5/16 x 2 ¾ in.

5/16 in.

(qty. 1)

06 (qty. 1)

(qty. 2)

C1 (qty. 3) C2 (qty. 3) C3 (qty. 3)

STEP 1 Attach Brackets to TV

FLAT BACK ROUND BACK CABLESINSET HOLES

1-1 Select TV

Screw Diameter

1-2 Select TV

Screw Length

If your TV has a flat back AND you want your TV closer to

the wall, use the shorter screws (a).

Use the spacers and longer screws (b) to accommodate:

●Round/irregular back TVs

●TVs with inset mounting holes

●Extra space needed for cables

Too Short

Too Long

CAUTION:

Verify adequate thread

engagement with the screw or

screw/spacer combination.

-Too short will not hold the TV.

-Too long will damage the TV.

Correct

M4 M6 M8

Only one size fits your TV.

If your TV included inset

spacers or wall mount adapters,

use them

UNDER the

mount hardware.

STEP 1 Attach Brackets to TV

1-3 Attach TV Brackets

Ensure that your brackets 04 and 05 are level on the back of the TV. Standard conﬁgurations are shown. For special applications, or if you

are unsure about your hardware selection, contact Customer Service.

aFlat Back

bRound Back / Extra Space

03 02

STEP 2A Attach Wall Plate to Wall Wood Stud Option

CAUTION: Avoid potential personal injuries and property damage!

●Drywall covering the wall must not exceed 5/8 in. (16 mm)

●Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the wall plate template 06 at your desired height and line up the holes with your stud center line. Level the template and tape in

place.

Max. 5/8 in.

(16 mm)

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template 06 .

IMPORTANT: Be sure to drill into the center of the stud.

IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).

4. Install wall plate 07 using two lag bolts 08 and two washers 09 . Tighten the lag bolts only until they are pulled firmly against the wall

plate.

CAUTION: Avoid potential personal injury or property damage! Both lag bolts 08 MUST BE firmly tightened to prevent unwanted

movement of the wall plate 07 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.

08 09

33 in.

(75 mm)

7/32 in.

(5.5 mm)

STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option

002862.eps

Concrete Installation Kit CMK1 is not included

(see page 5) Contact Customer Service

at 1-855-734-7805 to inquire about the

additional hardware.

3/8 in.

(10 mm)

3 in.

(75 mm)

Min. 4 ¾ in.

(120.6 mm)

CAUTION: Avoid potential personal injuries and property damage!

●Mount the wall plate 07 directly onto the concrete surface

●Minimum solid concrete thickness: 8 in. (203 mm)

●Minimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)

●Minimum horizontal space between the top two fasteners: 4 ¾ in. (120.6 mm)

1. Position the wall plate template 06 on the wall at your desired height. Level the wall plate template and mark the hole locations.

2. Drill three (3) pilot holes (2 on top, 1 on bottom) using a 3/8 in. (10 mm) diameter masonry drill bit.

Inhaltsverzeichnis

Sprachen:

Andere Sanus Rack & Stand Handbücher

Sanus

Sanus SASB1 Bedienungsanleitung

Sanus

Sanus WSECS1-B2 Bedienungsanleitung

Sanus

Sanus WSSAWM1 Bedienungsanleitung

Sanus

Sanus VST15 Bedienungsanleitung

Sanus

Sanus VMA301 Bedienungsanleitung

Sanus

Sanus SOA-SBM1 Bedienungsanleitung

Sanus

Sanus OLF24-B2 Bedienungsanleitung

Sanus

Sanus VMA401 Bedienungsanleitung

Sanus

Sanus SAN213 Bedienungsanleitung

Sanus

Sanus BFAV344 Bedienungsanleitung

Sanus

Sanus LR1A Bedienungsanleitung

Sanus

Sanus LMF115 Bedienungsanleitung

Sanus

Sanus Classic MST15 Bedienungsanleitung

Sanus

Sanus AMAZON ECHO SHOW 5 Bedienungsanleitung

Sanus

Sanus BMF320 Bedienungsanleitung

Sanus

Sanus SSASB2 Bedienungsanleitung

Sanus

Sanus VST4 Bedienungsanleitung

Sanus

Sanus VTM27 Montageanleitung

Sanus

Sanus F80 Bedienungsanleitung

Sanus

Sanus VisionMount MF202 Bedienungsanleitung

Sanus

Sanus SASB1 Bedienungsanleitung

Sanus

Sanus SA808 Bedienungsanleitung

Sanus

Sanus SLF9 Bedienungsanleitung

Sanus

Sanus HTB7 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung