Sanus VisionMount VMPl50A Bedienungsanleitung
Customer Service
SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA
©2020 Legrand AV Inc. All rights reserved. SANUS is a division of Legrand AV.
All other brand names or marks are used for identication purposes and are trademarks of their respective owners.
SANUS.com
We are here to help!
Please contact Customer Service with any questions.
VMPL50A Instruction Manual
Installation
video
available at
SANUS.com
2
English - How to use this manual
For best results, reference both the text and illustrations. Cut along
the dashed lines to match your language with the illustrations.
OR
OR
Select one item or the other.
OPT
OPT
This item is optional
English Text Pages 3-10
Français - Utilisation de ce guide
Pour obtenir de meilleurs résultats, reportez-vous à la fois au texte
et aux illustrations. Couper le long de la ligne pointillée pour faire
correspondre les illustrations à votre langue de préférence.
OR
OR
Sélectionnez un article ou l’autre.
OPT
OPT
Cet article est facultatif.
Texte français page 12-13
Español - Cómo usar este manual
Para obtener mejores resultados, consulte el texto y las ilustraciones.
Corte por las líneas discontinuas para hacer coincidir su idioma con
las ilustraciones.
OR
OR
Seleccione uno de los elementos.
OPT
OPT
Este elemento es opcional.
Texto en español página 14-15
3
Specifications
ÙWeight capacity-DO NOT EXCEED: 68 kg (150 lbs) includes TV and any accessories
ÙTilt: -10° to +8.5°
CAUTION: Avoid potential personal injuries and property damage!
ÙDo not use this product for any purpose not explicitly specified by manufacturer.
ÙThe wall must be capable of supporting five times the weight of the monitor and mount combined.
ÙThis product is not designed for use in metal stud walls!
ÙIf you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this
product, contact manufacturer Customer Service or call a qualified contractor.
ÙManufacturer is not responsible for damage or injury caused by incorrect assembly or use.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
TV INTERFACE
WALL PLATE
TOP VIEW - EXTENDED
3-D
SIDE VIEW RETRACTED
FULLY ASSEMBLED MOUNT
3.94
100
MIN
23.62
600 MAX
15.75
400
MAX
3.94
100
MIN
29.98
761.5
7.10
180.3
27.25
692.2
2.92
74.1
24.00
609.6
16.00
406.4
16.68
423.6
1.8
47.0
0.50
12.7
TOTAL HEIGHT
ADJUST
10deg
8.5˚
English
Dimensions in [mm]
4
M6 x 20 mm M6 x 35 mm
M8 x 25 mm M8 x 50 mm
M6 x 12 mm
M8 x 35 mm
M4 x 12 mm M4 x 35 mm
2.5mm5mm22mmM6/M8M4
M8 x 16 mm
10 mm
(3/8 in.)
5.5mm
(7/32 in.)
13 mm
(1/2 in.)
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged
item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: M4, M6, or M8 describes the diameter, mm describes the length of screws that are labeled M0 X 00mm. Not all hardware included will be used.
Required Tools
[04]
M4
M6
M8
[05] [06]
[01]
qty. 1
qty. 4 each
qty. 4 each
qty. 4
qty. 4
qty. 4
qty. 1
qty. 4 each
qty. 1 qty. 1
[02] [03]
[08]
[09]
⁄ x 2 ¾ in.
UX10 x 60R
[07]
[10]
⁄ in. Hex Key
5
1 Install TV Brackets
Before you begin, hand thread screws into the threaded
inserts on the back of your TV to determine the correct
screw diameter (M4, M6, or M8). Verify that there are
adequate threads to secure the brackets to the monitor. If
you encounter resistance, stop immediately and contact
customer service.
CAUTION: Avoid potential personal injuries and property
damage! Use the shortest screw and spacer combination to
accommodate your needs. Using hardware that is too long
may damage your monitor’s internal components.
1-1 For TV's with a flat/unobstructed back
M4/M6/M8
Ensure the brackets are level on the back of the TV and
the directional arrow at the bottom of each bracket is
pointing upward.
If you require additional space for cables, recesses, or
protrusions, see the next conguration.
[01], [02]
[04]
[05] [02] [01]
6
1-2 For TV's with an irregular/obstructed back
M4/M6/M8
[06]
[05]
[04]
For TVs with an irregular back
Ensure the brackets are level on the back of the TV and
the directional arrow at the bottom of each bracket is
pointing upward.
Standard congurations are shown. For special
applications, or if you are uncertain about your hardware
selection, contact Customer Service.
[01], [02]
[01]
[02]
7
≤ 16 mm
(5/8 in.) 40.6 - 61 cm
(16 - 24 in.)
2Mount the Wall Plate
Wood stud mounting
Wood stud only
5.5mm
(7/32 in.)
13 mm
(1/2 in.)
For assitance in determining wall plate location, see Height Finder at SANUS.com.
Locate studs. Verify the center of the stud with an awl or thin
nail or use an edge to edge stud finder.
CAUTION: Avoid potential personal injuries and property
damage!
ÙDrywall covering the wall must not exceed 16 mm (5/8
in.).
ÙMinimum wood stud size: common 51 x 102 mm (2 x 4
in.) nominal 38 x 89 mm (1½ x 3½ in.).
ÙMinimum horizontal space between fasteners: 40.6 cm
(16 in.).
[03]
[03]
[08]
[07]
Drill pilot holes as illustrated.
CAUTION: Improper use could reduce the holding power
of the lag bolt. To avoid potential injuries or property damage:
pilot holes MUST be drilled to a depth of 75 mm (3 in.), using
a 5.5 mm (7/32 in.) diameter drill bit.
Level wall plate [03] and mark hole locations.
CAUTION: Improper use could reduce the holding power
of the lag bolt. To avoid potential injuries or property damage:
pilot holes MUST be drilled to a depth of 75 mm (3 in.), using
a 5.5 mm (7/32 in.) diameter drill bit.
Tighten lag bolts [07] only until the washers [08] are pulled
firmly against the wall plate [03].
CAUTION: Improper use could reduce the holding power
of the lag bolt. To avoid potential injuries or property damage
DO NOT over-tighten the lag bolts [07].
75 mm
(3 in.)
8
2Mount the Wall Plate
Solid concrete or concrete block
concrete only
13 mm
(1/2 in.)
10 mm
(3/8 in.)
For assitance in determining wall plate location, see Height Finder at SANUS.com.
[03]
002862.eps
75 mm
(3 in.)
[09]
Drill pilot holes as illustrated.
CAUTION: To avoid potential injuries or property damage:
ÙPilot holes MUST be drilled to adepth of 75 mm (3 in.) using a
10 mm (3/8 in.) diameter drill bit.
ÙNever drill into the mortar between blocks.
Insert lag bolt anchors [09].
CAUTION: To avoid potential injuries or property damage be
sure the anchors [09] seat flush with the concrete surface.
Tighten the lag bolts [07] only until the washers [08] are pulled
firmly against the wall plate [03].
CAUTION: Improper use could reduce the holding power of
the lag bolt. To avoid potential injuries or property damage DO NOT
over-tighten the lag bolts [07].
[03]
[08]
[07]
Level wall plate and mark the hole locations.
CAUTION: Avoid potential personal injuries and property
damage!
ÙMount the wall plate [03] directly onto the concrete surface.
ÙMinimum solid concrete thickness: 203mm (8 in.).
ÙMinimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.).
ÙMinimum horizontal space between fasteners: 40.6 cm (16 in.).
9
3 Hang the TV with Mounting Brackets onto the Wall Plate
CAUTION: You will need assistance with this step.
Install the TV / Bracket assembly by fitting the top
hooks of the mounting brackets over the top edge of
the wall mount.
Swing the mounting brackets down until the spring
loaded locking tabs slip over and fully engage the
bottom edge of the wall mount. You will hear an
audible “CLICK”.
Tilt tension can be adjusted with the vertical bracket
knobs by hand or using the hex key [10].
[10]
10
±12.7 mm
(± ½ in.)
5 Remove the TV from the Wall
4 Adjust Level
ProSet Post Installation Leveling
To remove the TV from the wall plate, flip the locking
tabs of each vertical bracket away from the wall plate
to release the brackets, then lift the TV up and out from
the wall.
CAUTION: You will need assistance with this step.
[10]
Andere Handbücher für VisionMount VMPl50A
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Sanus Rack & Stand Handbücher
Sanus
Sanus VST15 Bedienungsanleitung
Sanus
Sanus CFR115 Bedienungsanleitung
Sanus
Sanus OLF24-B2 Bedienungsanleitung
Sanus
Sanus 6901-170053 Bedienungsanleitung
Sanus
Sanus CAPS27 Bedienungsanleitung
Sanus
Sanus SSASB2 Bedienungsanleitung
Sanus
Sanus CFR1610 Bedienungsanleitung
Sanus
Sanus VTM27 Montageanleitung
Sanus
Sanus VLF510B1 Bedienungsanleitung
Sanus
Sanus WSS22 Bedienungsanleitung
Sanus
Sanus VSTV1 Bedienungsanleitung
Sanus
Sanus VMTV Bedienungsanleitung
Sanus
Sanus Secura QML12 Bedienungsanleitung
Sanus
Sanus WSEDM2 Bedienungsanleitung
Sanus
Sanus WSS21 Bedienungsanleitung
Sanus
Sanus Secura QLL12 Bedienungsanleitung
Sanus
Sanus Sanus VisionMount ML22 Bedienungsanleitung
Sanus
Sanus VisionMount VMPl50A Bedienungsanleitung
Sanus
Sanus A701 Bedienungsanleitung
Sanus
Sanus SAN213 Bedienungsanleitung
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
