Sanyo Xacti VPC-CA8GX Bedienungsanleitung
VPC-CA8EX
VPC-CA8GX
INSTRUCTION MANUAL
Digital Movie Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-CA8EX and VPC-
CA8GX.
Any information regarding only one of these products will be labeled as such.
iEnglish
Warning
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of
California (USA):
WARNING:
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or other reproductive harm. Wash
hands after handling.
iThis equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
hReorient or relocate the receiving antenna.
hIncrease the separation between the equipment and receiver.
hConnect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
hConsult the dealer or an experienced radio/TV technician for help.
iChanges or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Declaration of Conformity
Model number: VPC-CA8EX, VPC-CA8GX
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
English ii
FOR CANADIAN USERS
iThis Class B digital apparatus complies with Canadian ICES-003.
FOR EU USERS
Note:
iThis symbol mark and recycle system apply only to EU
countries and do not apply to countries in other areas of
the world.
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
FOR RUSSIAN USERS
This product certified by official certification company
which is authorized by Russian Federation.
SANYO FISHER Sales (Europe) GmbH
Stahlgruberring 4, D-81829 München, Germany
SANYO Electric Co., Ltd.
1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan
iii English
Symbols used in this manual
HINT Points giving some extended instructions or special points to pay
attention to.
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.
You may find the answers to questions or problems concerning camera
operation in the sections “COMMONLY ASKED QUESTIONS” (page 165)
and “TROUBLESHOOTING” (page 172).
English iv
SHOOT, PLAY BACK AND SAVE
Install the battery pack and card
1 Insert the battery pack.
2 Insert the SD Memory Card.
hAn SD Memory Card is not included with your camera. Please
purchase a commercially sold card.
hIn this manual, the SD Memory Card is referred to as the “card”.
Lever
1Press the latch
Battery pack slot
2Insert
1Push 2Open
Bottom side
Card slot
2Insert
1Open
vEnglish
SHOOT, PLAY BACK AND SAVE
Before capturing those important shots, be sure to first take a
test shot to confirm that your camera is set up and ready to go
iSanyo declines any claim for compensation for recorded contents etc. in
case of photographing or recording failure due to a chance camera or card
flaw.
Shooting
kVideo clip recording
1 Open the monitor unit, and
press the ON/OFF button
for at least 1 second.
hThe camera turns on.
h
If the screen to set the date
and time appears, press
the MENU button 2 times
to cancel it.
For how to set the date
and time, see page 32.
2 Press the [ ] button.
hRecording begins.
hTo stop recording, press
the [ ] button again.
kStill image
photography
1 Open the monitor unit, and
press the ON/OFF button
for at least 1 second.
hThe camera turns on.
2 Press the [ ] button.
hA still image is captured.
668
668
01:17:32
01:17:32
668 01:17:32
Monitor unit
[]button
[ ] button
ON/OFF button
English vi
Playback
kVideo clip playback
1
Press the REC/PLAY button.
hThe display switches to the
Playback Screen.
hPress the [G] or [H] button
to display the video clip you
wish to play back.
hVideo clips are indicated by
a video clip pattern along
the left and right sides of the
screen.
2 Press the SET button.
hPlayback of the selected
video clip begins.
kStill image playback
1
Press the REC/PLAY button.
hThe display switches to the
Playback Screen.
hTo view other images, press
the [G] or [H] button.
<To return to the Shooting
Screen>
hPress the REC/PLAY
button.
When you are finished using the camera...
Press the ON/OFF button for at least 1 second to turn the camera off.
PLAY
SAVE
PLAY
SAVE
SET button
REC/PLAY button
<Example: After recording
a video clip>
Arrow buttons
Video clip pattern
vii English
SHOOT, PLAY BACK AND SAVE
Burn your recorded video clips onto a DVD
(Windows XP)
Introduced here is the procedure to use the supplied DVD-ROM (Xacti
Software DVD) to burn movies captured with your camera to a DVD,
creating your original DVD.
Install the application programs
Install the following program from the Xacti Software DVD to your computer:
Adobe Premiere Elements 4.0 (in this manual, referred to as Premiere
Elements) for creating DVDs.
1 Set the supplied DVD-ROM (Xacti Software DVD) in your computer’s
DVD drive.
hThe installation window opens.
2 Click on the application program you wish to install.
hAfter clicking on an application program, follow the instructions shown
on the monitor to install the program.
hWhen installing Premiere Elements, input the serial number found on
the DVD-ROM envelope. It looks similar to the following:
SERIAL NUMBER: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
( ↑input this number)
hWhen the installation is complete, the product registration window will
appear, but click on the Exit button to close the window.
Install Premiere Elements.
English viii
3 In the installation window, click on [Finish].
hThe installation window closes.
hRemove the DVD-ROM from your computer’s DVD drive.
<About the Kodak online service>
hWhen the installation window closes, a dialog box to connect to the
website introducing Kodak’s online service appears. Check the [No
thanks !] option button, and then click on the [OK] button.
Copy data from your camera to the computer
Connect your camera to a computer, and copy the desired data to the
computer.
1 Turn on the computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
hConnect the cable between the camera’s USB/AV terminal and the
computer’s USB connector.
2 Turn on the camera (page 30).
hThe USB Connection Screen appears on the camera’s monitor.
OK
CANCEL
USB CONNECTION
CANCEL
PRINTER
COMPUTER
To USB/AV terminal
on the camera
To USB connector
on the computer
Supplied dedicated
USB interface cable
SET button
ix English
SHOOT, PLAY BACK AND SAVE
3 Select “COMPUTER”, and press the SET button.
hThe screen to select the computer
connection mode appears.
4 Select “CARD READER”, and press the SET button.
5 Copy data from your camera to a computer.
USB CONNECTION
MTP
CARD READER
SCREEN CAPTURE
PC CAMERA
CANCEL
OK
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Sanyo Camcorder Handbücher
Sanyo
Sanyo VPC-HD2000ABK Bedienungsanleitung
Sanyo
Sanyo VPC-TH1BL Bedienungsanleitung
Sanyo
Sanyo Xacti VPC-HD2000A Bedienungsanleitung
Sanyo
Sanyo Xacti VPC-WH1YL Bedienungsanleitung
Sanyo
Sanyo Xacti VPC-C1EX Bedienungsanleitung
Sanyo
Sanyo Xacti VPC-C1 Bedienungsanleitung
Sanyo
Sanyo VPC-HD1A Bedienungsanleitung
Sanyo
Sanyo XACTI VPC-SH1EX Montageanleitung
Sanyo
Sanyo Xacti VPC-GH1EX Montageanleitung
Sanyo
Sanyo VPC-CG22 Bedienungsanleitung
Sanyo
Sanyo VM-D90R Bedienungsanleitung
Sanyo
Sanyo VPC-HD1010BK Bedienungsanleitung
Sanyo
Sanyo Xacti HD VPC-HD2000EX Bedienungsanleitung
Sanyo
Sanyo XACTI VPC-GH3EX Bedienungsanleitung
Sanyo
Sanyo VPC-CG88EX Bedienungsanleitung
Sanyo
Sanyo XACTI VPC-SH1GX Montageanleitung
Sanyo
Sanyo Xacti VPC-FH1 Series Bedienungsanleitung
Sanyo
Sanyo VPC-CG20 - Full HD 1080 Video Bedienungsanleitung
Sanyo
Sanyo VCC-WD8870P Bedienungsanleitung
Sanyo
Sanyo Xacti VPC-CG10BK Bedienungsanleitung
Beliebte Camcorder Handbücher anderer Marken
Panasonic
Panasonic AG-HMC152EN Bedienungsanleitung
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung
MYDLINK
MYDLINK DCS-6100LH Bedienungsanleitung
Sony
Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung
SECURECOM
SECURECOM V-5014B Bedienungsanleitung
Panasonic
Panasonic HDC-SD100 Bedienungsanleitung
