Sanyo VCB-3572IRP Bedienungsanleitung
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
VCB-3572IRP
B/W CCD Camera
CCD-Schwarzweißkamera
Caméra CCD Noir et Blanc
CCD
About this manual
Before installing and using the camera, please read this
manual carefully. Be sure to keep it handy for later reference.
Über diese Bedienungsanleitung
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.
A propos de ce manuel
Avant d’installer et d’utiliser la caméra, veuillez lire ce
manuel attentivement. Gardez-le à portée de main
pour toute référence ultérieure.
L72H2/XE2 GB 1999, 3, 2
CONTENTS
PRECAUTIONS..................................................................................... 2
PARTS NAMES..................................................................................... 3
CONCERNING AUTO-IRIS LENSES...................................................... 5
MOUNTING THE LENS........................................................................ 6
CONNECTIONS.................................................................................... 8
SETTINGS............................................................................................. 9
TROUBLESHOOTING........................................................................... 11
SPECIFICATIONS.................................................................................. 12
ACCESSORIES...................................................................................... 13
Depending on the conditions of use, installation and environment,
please be sure to make the appropriate settings and adjustments. If
you need help with installation and/or settings, please consult your
dealer.
FEATURES
•Infrared signals immediate area sensitivity is improved by about 10
d from previous models.
•uilt-in interline transfer method 1/2" CCD, approx. 470,000
picture elements
•Low smear, anti-blooming, low lag, no burning and no geometric
distortion using the CCD solid state image device.
•100% solid state components giving excellent immunity to shock
and vibration
•Not subject to interference from magnetic or electrostatic fields
•High sensitivity, minimum required illumination of 0,02 lux with
F1.2 lens
•Horizontal resolution, more than 560 TV lines
•New backlight compensation function (Active when using an
auto-iris lens)
•Externally adjustable flange back (mechanical focus)
•Low power consumption and quick start
•12 V DC operation
L72H2/XE2 G 1999, 3, 2
English 1
PRECAUT ONS
n case of problem
Do not use the camera if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage
to the unit. For internal settings and repairs, consult your dealer (or a
Sanyo Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the camera. If used with a foreign object inside, it could cause a fire,
short-circuits or damages.
If water or a liquid gets inside the camera, disconnect the power cord
immediately, and consult your dealer (or a Sanyo Authorized Service
Centre). e careful to protect the camera from rain, sea water, etc.
Be careful when handling the unit
To prevent damages, do not drop the camera or subject it to strong
shock or vibration.
nstall away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.
Protect from humidity and dust
To prevent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.
Protect from high temperatures
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc., or where it could be subject to direct sunlight, as
that could cause deformation, discoloration or other damages.
e careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may raise to high levels.
Install where the temperature range will stay between –10˚C and 50˚C.
(no condensation)
Cleaning
•Dirt can be removed from the cabinet by wiping it with a soft
cloth. To remove stains, wipe with a soft cloth moistened with a
soft detergent solution and wrung dry, then wipe dry with dry soft
cloth.
•Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling. efore
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes
in contact with the cabinet for a long period of time, as that may
cause damage or paint peeling.
ENGL SH
L72H2/XE2 G 1999, 3, 2
2 English
PARTS NAMES
1Video output connector (V DEO OUT: BNC type)
Connect this connector to a device such as a VCR or monitor with a V DEO N connector.
2External sync composite video signal input connector
(VS N: BNC type)
Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite
signal of a video distributor.
3Power indicator (POWER)
Comes on when the power to the camera is on.
412 V DC input terminal (12 V DC, NC)
Connect DC connecting cord from the AC adaptor to the 12V DC input terminal on the camera.
Then, plug the AC adaptor into an AC outlet.
5Camera setup section (under the cover)
These settings are for when using a 1/2 inch CS mount DC (without EE internal amplifier) type lens. However,
if due to installation conditions or environment the settings may need to be modified for best results (see
"SETT NGS").
To access the controls, loosen the cover fixing screw A, then remove the cover.
6Lens iris output connector (LENS)
This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.
13
2
4
5
6
4
1
2
3
A
L72H2/XE2 G 1999, 3, 2
English 3
PARTS NAMES
7Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens (sold separately).
8Flange-back adjustment screw (FLANGE BACK ADJ.)
9Flange-back lock screw (FLANGE BACK LOCK)
FCamera installation bracket
The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the
longer screws and install the shorter screws on the opposite side to seal the openings.
1Shorter screws: M3 x 4
2Longer screws: M3 x 6
3Camera mounting screw hole: 1/4"-20 UNC
CAUT ON:
When installing the camera support, select a location that can support the total weight of the
camera and accessories.
1232
1
F
78
9
L72H2/XE2 G 1999, 3, 2
4 English
CONCERN NG AUTO- R S LENSES
DC type auto-iris lens
A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is
referred to as DC type coil lens or DC type non-amplifier lens.
(Set the A. . LENS switch to the DC position.)
V DEO type auto-iris lens
A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is
referred to as EE amplifier type lens.
ALC and LEVEL volume level controls are available on the lens for iris adjustments.
(Set the A. . LENS switch to the V DEO position.)
Compatible auto-iris lenses
1/2 inch Sanyo DC type lens 1/2 or 2/3 inch V DEO type lens
VCL-CS12GY: Standard angle, f= 12 mm Semi-wide angle, f= 9 mm
VCL-CS6GY: Wide angle, f= 6 mm Standard angle, f= 12 mm
VCL-CS3GY: Ultra-wide angle, f= 3.7 mm Telephoto angle, f= 16 mm
f using a V DEO type auto-iris lens
•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned
all the way to Av (Average).
•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL
volume on the lens casing to correct.
DC
VIDEO
A. I.
LENS
L72H2/XE2 G 1999, 3, 2
English 5
MOUNT NG THE LENS
Please use a DC type auto-iris lens (sold separately).
Checking the lens mount
Do not use a lens if length “L” is more than 7 mm. If not, that may damage the camera and prevent
proper installation.
1Remove the lens mount cap from the camera.
2Install the auto-iris lens.
CS mount type lens
Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
C mount type lens
To allow for flange-back adjustment, install the supplied C-mount adaptor on the lens mount, then
carefully align the lens mount with the camera opening and turn the lens slowly to install it.
3Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.
When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.
In such a case, remove the original plug and using a soldering iron, connect the supplied lens iris plug
according to the diagram. (Refer to page 7.)
CAUT ON:
When using an auto-iris lens, the supplied clamping core ( ) must be installed on the lens wire, in order to
prevent electromagnetic interference to the other devices connected.
L
C mount type lens
1
2
2
3
CS mount
type lens
L72H2/XE2 G 1999, 3, 2
6 English
MOUNT NG THE LENS
Rewiring the lens cable in the lens iris plug
1Prepare the lens cable.
Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each
wire.
2nstall the lens iris plug.
Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close
the plug cover.
Pin layout
DC type lenses V DEO type lenses
1rake coil (–) +12 V DC (50 mA max.)
2rake coil (+) Not used
3Drive coil (+) Video output (1.0 Vp-p, high impedance)
4Drive coil (–) Ground (for video signal and DC power)
Flange-back adjustment
If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of
focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the
flange-back position as described below.
1Using a + screwdriver, loosen the FLANGE BACK LOCK screw (M2:+).
Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.
2Set the zoom lens to the maximum wide angle position, set the focus using the FLANGE BACK ADJ. screw.
3Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle shot.
When the setting is complete, tighten the FLANGE BACK LOCK screw.
1
2
4
31
4
31
22
1
1
3
LOCK
2
ADJ.
L72H2/XE2 G 1999, 3, 2
English 7
CONNECT ONS
Basic c nnecti n f r m nit ring r rec rding
The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.
1Make the video signal connection between the camera and the monitor or time lapse VCR.
2Connect DC connecting cord from the AC adaptor to the 12 V DC input terminal on the camera.
•When using this unit, the supplied clamping core (A) must be installed on the power cord, in order to
prevent electromagnetic interference to the other devices connected.
WARN NG:
•This AC adaptor is specially conceived for this camera. Never use another type of AC adaptor with this
camera, and do not use this AC adaptor to power other types of cameras.
•Not for use with toys.
•Never try to disassemble or modify the AC adaptor.
3Insert the plug of this power cord into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the monitor using the rightness and Contrast
controls.
Coaxial cable type and maximum length
•Cable type RG-59U (3C-2V), 250 m maximum.
•Cable type RG-6U (5C-2V), 500 m maximum.
•Cable type RG-11U (7C-2V), 600 m maximum.
CAUT ON:
•The RG-59U type cable should not be run through electrical conduits or through the air.
•Using CCTV/Video-grade coaxial cable.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
1
3
2
L72H2/XE2 G 1999, 3, 2
8 English
SETT NGS
Control name Position
aHigh speed electronic shutter switches (E.S.) All OFF:
1/50 sec
bElectronic iris (E )/Backlight compensation
(BLC) switch
OFF
cAuto-iris lens switch (A. . LENS)
Refer to page 5
DC
dLens iris level volume (LEVEL) about centre
High speed electronic shutter setting
Normally, the speed setting switches for the high speed electronic
shutter are all set to the OFF position. This sets the electronic shutter
speed to 1/50 sec. The switches can be set as indicated in table A to
select one of the 8 speeds available.
CAUT ON:
•When using the high speed electronic shutter, the E /BLC switch
must be set to the OFF position.
•Using the high speed electronic shutter indoors with low lighting,
will give darker pictures. In such a case, add some lights to make
sure the lighting is sufficient. If the lighting is very bright, pay
attention to the light angle in order to avoid or minimize the
smear phenomenon effect.
Table A
1
1/50
2
1/120
3
1/250
4
1/500
5
1/1000
6
1/2000
7
1/4000
8
1/10000
(Unit: sec.)
ON
OFF
ON
E. S. BLC
L
E
V
E
L
DC
VIDEO
A. I.
LENS
LH
VR401
ON
123
EI
d
abc
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
L72H2/XE2 G 1999, 3, 2
English 9
Inhaltsverzeichnis
Andere Sanyo Sicherheitskamera Handbücher
Sanyo
Sanyo VCB-3412P Bedienungsanleitung
Sanyo
Sanyo VCC-HD4600P Bedienungsanleitung
Sanyo
Sanyo VCC-3972P Bedienungsanleitung
Sanyo
Sanyo VCB-3442P Bedienungsanleitung
Sanyo
Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network... Bedienungsanleitung
Sanyo
Sanyo VDC-DP7584S - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung
Sanyo
Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung
Sanyo
Sanyo VCC-ZM500P Bedienungsanleitung
Sanyo
Sanyo VDC-DP7584 - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung
Sanyo
Sanyo VCC-6975 Bedienungsanleitung
Sanyo
Sanyo VCC-4794E - 1/3" Color CCD DSP Day/Night... Bedienungsanleitung
Sanyo
Sanyo VCC-5884EA - 1/3" Color CCD DSP High-Resolution... Bedienungsanleitung
Sanyo
Sanyo VCC-4594 Bedienungsanleitung
Sanyo
Sanyo VCC-HD3300 Bedienungsanleitung
Sanyo
Sanyo VCB-3444 Bedienungsanleitung
Sanyo
Sanyo VCB-3524 Bedienungsanleitung
Sanyo
Sanyo VDC-HD3500 - Full HD 1080p Vandal Dome... Bedienungsanleitung
Sanyo
Sanyo VCB-3424 Bedienungsanleitung
Sanyo
Sanyo VCC-4312P Bedienungsanleitung
Sanyo
Sanyo VC-0450 Bedienungsanleitung
