Sanyo VCB-9312P Bedienungsanleitung

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

B/W CCD Camera

CCD-Schwarzweißkamera

Caméra CCD Noir et Blanc

VCB-9312P

Über diese Bedienungsanleitung

Lesen Sie bitte vor der Montage und dem

Inbetriebnehmen der Kamera zuerst diese

Bedienungsanleitung sorgfältig durch und bewahren Sie

sie zum späteren Nachschlagen auf.

About this manual

Before installing and using the camera, please read this

manual carefully. Be sure to keep it handy for later reference.

À propos de ce manuel

Avant d’installer et d’utiliser la caméra, veuillez lire ce

manuel attentivement. Gardez-le à portée de main

pour toute référence ultérieure.

CCD

L73E2/XE GB 1998, 8, 19

CONTENTS

PRECAUTIONS........................................................................................ 2

PARTS NAMES AND FUNCTIONS ......................................................... 3

CONNECTIONS AND INSTALLATION ................................................... 5

SETTINGS AND ADJUSTMENTS ........................................................... 8

TROUBLESHOOTING ............................................................................. 9

SPECIFICATIONS.................................................................................... 9

Accessories

1AC adaptor .............................................................................. 1 pc.

2AC adaptor mounting plate ..................................................... 1 pc.

: With 3 fixing screws

3Clamping core.......................................................................... 1 pc.

4Vertical holder plate................................................................. 1 pc.

1234

FEATURES

•Built-in interline transfer method 1/3 CCD, approx. 320,000

picture elements

•Low smear, anti-blooming, low lag, no burning and no geometric

distortion using the CCD solid state image device

•Built-in fixed focal lens, F=2.0, f=3.8 mm

•100% solid state components giving excellent immunity to shock

and vibration

•Not subject to interference from magnetic or electrostatic fields

•Built-in IR. LED by very required mininum illumination is approx.

0 lux at 4.5 m

•Horizontal resolution, more than 400 TV lines

•Power supply: 12 V DC operation

L73E2/XE GB 1998, 8, 19

English 1

RECAUTIONS

In case of problem

Do not use the camera if smoke or a strange odour comes from the

unit, or if it seems not to function correctly. Disconnect the power

cord immediately, and consult your dealer (or a Sanyo Authorized

Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage

to the unit. For internal settings and repairs, consult your dealer (or a

Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside

the camera. If used with a foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord

immediately, and consult your dealer (or a Sanyo Authorized Service

Centre). Be careful to protect the camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera or subject it to strong

shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor,

transformer, audio speakers the magnetic field they generate will

distort the image.

rotect from humidity and dust

To prevent damages to the camera, do not install it where there is

greasy smoke or steam, where the dampness may get too high, or

where there is a lot of dust.

rotect from high temperatures

Do not install close to stoves, or other heat generating devices, such

as spotlights, etc., or where it could be subject to direct sunlight, as

that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler

room, as the temperature may raise to high levels.

Install where the temperature range will stay between –10˚C and

50˚C. (no condensation)

Cleaning

•Dirt can be removed from the cabinet by wiping it with a soft

cloth. To remove stains, wipe with a soft cloth moistened with a

soft detergent solution and wrung dry, then wipe dry with dry soft

cloth.

•Do not use benzine, thinner or other chemical product on the

cabinet, as that may cause deformation and paint peeling. Before

using a chemical cloth, make sure to read all accompanying

instructions. Make sure that no plastic or rubber material comes in

contact with the cabinet for a long period of time, as that may

cause damage or paint peeling.

ENGLISH

L73E2/XE GB 1998, 8, 19

2 English

ARTS NAMES AND FUNCTIONS

567

The view angle of this camera is as follows:

Horizontal: 71˚

Vertical: 53˚

Diagonal: 90˚

To adjust the camera angle, use the camera

mounting bracket (sold separately).

L73E2/XE GB 1998, 8, 19

English 3

ARTS NAMES AND FUNCTIONS

1Hood lens

2Focus ring

The focus does not need adjustment for subjects 1 m and more

from the lens. If the subject is closer than 1 m, turn the focus ring

to adjust the focus as necessary. (See page 8.)

3Lens

4Lens cover

This cover will protect the lens from dust and damage.

512 V DC input terminal (12 V DC IN)

Connect DC connecting cord from the AC adaptor to the 12V DC

IN terminal on the base. Then, plug the AC adaptor into an AC

outlet.

WARNING:

• This AC adaptor is specially conceived for this camera. Never use

another type of AC adaptor with this camera, and do not use this

AC adaptor to power other types of cameras.

• Not for use with toys.

• Never try to disassemble or modify the AC adaptor.

6Camera mounting screw hole (1/4"–20 UNC)

When mounting the camera to the mounting bracket, use this

installation hole.

7Lens cover fixing screw

8GND (ground) terminal screw

Loosen the GND terminal screw, insert the coaxial cable into the

clamp and tighten the GND terminal screw.

9VIDEO OUT terminal screw

Align the centre wire of the coaxial cable with the VIDEO OUT

terminal, then first tighten the cable clamp and then the VIDEO

OUT terminal screw.

•Cable type RG-6U (5C-2V)

L73E2/XE GB 1998, 8, 19

4 English

CONNECTIONS AND INSTALLATION

Connecting the coaxial cable horizontally

1Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.

2Attach the coaxial cable to the base.

Loosen the VIDEO OUT terminal screw (A) and the GND terminal screw (B), then insert the

center wire of the coaxial cable in the VIDEO OUT terminal and make sure the shielding

mesh part of the cable is located into the GND cable clamper, then tighten both screws (A

and B) to attach the cable.

Connecting the coaxial cable vertically (using the vertical holder

plate)

1Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.

2Loosen the VIDEO OUT terminal screw and remove the GND terminal screw.

3Insert the coaxial cable into the GND terminal clamp (a), then attach the clamp to

the supplied vertical holder plate (b) using the screw (c) from the second GND

terminal.

4Attach the vertical holder plate to the GND terminal using the terminal screw, then

insert the centre wire of the coaxial cable into the VIDEO OUT terminal and tighten

the terminal screw.

(Return the shielding mesh here)

L73E2/XE GB 1998, 8, 19

English 5

CONNECTIONS AND INSTALLATION

Installing the BNC plug (sold separately)

To connect the camera to peripheral devices, use a coaxial cable with BNC plug.

1Cut the extremity of the coaxial cable (sold separately), as illustrated.

•Cable type RG-6U (5C-2V), 500 m maximum.

If the type of peripheral devices connected, the type of cable used and/or the cable

length are not as specified, the image and synchronization signals may not be

transmitted correctly.

CAUTION:

Use CCTV/Video grade coaxial cable. Due to its construction, an RG-59U cable will not

transmit the signal properly when installed through conduits or through the air, and

therefore cannot be used.

2Insert the cable through the adaptor, then turn the shielding mesh over.

3Loosen the center wire securing screw of the plug, then install the cable in the BNC

plug, so that the center wire is threaded through the plug center opening.

Before tightening the center wire securing screw, make sure the center wire comes out

through the plug center opening.

4Screw the adaptor onto the plug.

7mm 8mm

3 4

1 2

L73E2/XE GB 1998, 8, 19

6 English

CONNECTIONS AND INSTALLATION

Basic connections for monitoring or recording

The peripheral devices (VCR, monitor, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time

lapse VCR.

2lug the AC adaptor to a wall outlet.

Adjust the picture on the monitor using the Brightness and Contrast controls.

Multiple cameras connection

You can use multiple cameras by connecting them a camera switcher or a quad unit (sold

separately), then conducting the surveillance from one location by splitting the monitor screen to

view the image from each camera, or by switching the image from each camera on the monitor

screen. For detailed information, please refer to the installed devices instruction manuals.

(Example of connection to a monitor)

CAUTION:

•Make sure the AC adaptor is not

connected to the wall outlet before

connecting it to the 12 V DC input

terminals.

•When making the connections be careful

to respect the polarity and not to

shortcut the terminals.

•When using this unit, the supplied

clamping core must be installed on the

power cord (see Fig. 1), in order to

prevent electromagnetic interference to

the other devices connected.

Fig. 1

Fig. 2

VIDEO IN Time lapse VCR VIDEO OUT VIDEO IN

Monitor

(sold separately)

VIDEO IN

: VIDEO IN

: VIDEO OUT

L73E2/XE GB 1998, 8, 19

English 7

SETTINGS AND ADJUSTMENTS

Adjusting the focus

1Loosen the lens cover fixing screw (A).

2Turn the cover counterclockwise to align the tab (C) on

the lens cover with the tab (B) on the base and remove

the cover.

3Remove the hood lens (D), then while watching the

image on the monitor turn the focus ring (E) to adjust

the focus.

4When finished, install the hood lens, then align the tab

turn the cover clockwise until the tab (F) on the cover is

aligned with the tab (B) on the base. Tighten the lens

cover fixing screw (A).

L73E2/XE GB 1998, 8, 19

8 English

TROUBLESHOOTING

Before taking the camera for repairs, please check below to make

sure that the camera is used correctly. If it still does not perform

correctly, please consult your dealer or a Sanyo Authorized Service

Center.

No picture on the monitor screen

•Is the power turned on to all connected devices? Is the voltage

correct?

•Are all the signal connecting cables correctly connected?

•Is the lighting sufficient?

The picture is not clear

•Is the monitor correctly adjusted?

•Is the lens focus correctly adjusted?

•Are the lens surfaces clean?

If there is dust or finger prints on the lens, the image quality will

deteriorate. To clean the lens use a soft cloth or a commercially

available lens cleaning set.

SERVICE:

This camera is a precision instruments and, if treated with care, it

will provide years of satisfactory performance. However, in the

event of a problem, the owner is advised not to attempt to make

repairs or open the cabinet. Servicing should always be referred to

your dealer or Sanyo Authorized Service Center.

S ECIFICATIONS

Camera

TV system CCIR standard (625 TV lines, 25

frames/sec.)

Scanning system 625 TV lines, 50 field/sec.,

2:1 interlace

Image device Interline transfer method, 1/3 inch

solid state CCD

icture elements 537 (H) × 597 (V)

Effective picture elements 500 (H) × 582 (V)

Synchronization system Internal sync.

Resolution 400 TV lines horizontally, 400 TV

lines vertically

Video output signal level 1.0 Vp-p/75Ω (screw-on terminal)

S/N ratio More than 50 dB

Minimum required

illumination

0 lux

Electronic iris range 1/50 to 1/80,000 sec.

Iris system Electronic iris

Gain control Automatic

Lens Built-in, F2.0, f=3.8 mm, fixed focal

lens, focus adjustment

Angle of view Horizontally: Approx. 71˚

Vertically: Approx. 53˚

Diagonal: Approx. 90˚

L73E2/XE GB 1998, 8, 19

English 9

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCB-3572IRP Bedienungsanleitung

Sanyo

Sanyo VCC-HD4000 - Network Camera Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100P Bedienungsanleitung

Sanyo

Sanyo VCC-6580P Bedienungsanleitung

Sanyo

Sanyo VCB-3424 Bedienungsanleitung

Sanyo

Sanyo VCC-4110P Bedienungsanleitung

Sanyo

Sanyo VCC-HD5600 - Full HD 1080p Day/Night Pan-Tilt-Zoom... Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo Vcc-4344 Bedienungsanleitung

Sanyo

Sanyo VCC-P7575P Pan-Focus Bedienungsanleitung

Sanyo

Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network... Bedienungsanleitung

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo vcb-3400p Bedienungsanleitung

Sanyo

Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network... Bedienungsanleitung

Sanyo

Sanyo VCB-3312P Bedienungsanleitung

Sanyo

Sanyo VCC-XZ600N - Network Camera - Weatherproof Bedienungsanleitung

Sanyo

Sanyo VCC-HD4600P Bedienungsanleitung

Sanyo

Sanyo VCC-6592PC Bedienungsanleitung

Sanyo

Sanyo VDC-DP7584S - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-XZ600 Bedienungsanleitung

Sanyo

Sanyo VCC-WB2000 Bedienungsanleitung

Sanyo

Sanyo VCB-3384 Bedienungsanleitung

Sanyo

Sanyo VCC-6975 Bedienungsanleitung

Sanyo

Sanyo VCC-3974P Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung