Sanyo VCC-4324P Bedienungsanleitung

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

VCC-4324P

COLOUR CCD camera

CCD-Farbkamera

Caméra CCD COULEUR

CCD

About this manual

Before installing and using the camera, please read this

manual carefully. Be sure to keep it handy for later reference.

Über diese Bedienungsanleitung

Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der

Kamera zuerst diese Bedienungsanleitung sorgfältig durch und

bewahren Sie sie zum späteren Nachschlagen auf.

A propos de ce manuel

Avant d’installer et d’utiliser la caméra, veuillez lire ce

manuel attentivement. Gardez-le à portée de main

pour toute référence ultérieure.

L53S4/XE GB 1999, 6, 16

Depending on the conditions of use, installation and environment,

please be sure to make the appropriate settings and adjustments. If

you need help with installation and/or settings, please consult your

dealer.

CONTENTS

PRECAUTIONS........................................................................................ 2

PARTS NAMES........................................................................................ 3

CONCERNING AUTO-IRIS LENSES......................................................... 5

MOUNTING THE LENS........................................................................... 6

CONNECTIONS....................................................................................... 8

FLANGE-BACK ADJUSTMENT................................................................ 9

SETTINGS................................................................................................10

TROUBLESHOOTING..............................................................................15

SPECIFICATIONS.....................................................................................16

ACCESSORIES

1C mount adaptor ( mm).....................1 pc.

The C mount adaptor must be used to be able to install a C mount

lens on the camera.

2Lens iris plug (4-pin).............................1 pc.

FEATURES

•The optical filter is switched automatically to colour image or black

and white image according to the subject brightness.

•Built-in interline transfer method 1/3" CCD, approx. 320,000

picture elements

•Low smear, anti-blooming, low lag, no burning and no geometric

distortion using the CCD solid state image device.

•100% solid state components giving excellent immunity to shock

and vibration

•Not subject to interference from magnetic or electrostatic fields

•High sensitivity, minimum required illumination is 0.0 lux (F1.2)

•Horizontal resolution, more than 330 TV lines

•Power supply: 24 V AC operation

L 3S4/XE GB 1999, 6, 16

English 1

RECAUTIONS

In case of problem

Do not use the camera if smoke or a strange odour comes from the

unit, or if it seems not to function correctly. Disconnect the power

cord immediately, and consult your dealer (or a Sanyo Authorized

Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage

to the unit. For internal settings and repairs, consult your dealer (or a

Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside

the camera. If used with a foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord

immediately, and consult your dealer (or a Sanyo Authorized Service

Centre). Be careful to protect the camera from rain, sea water, etc.

Be careful when handling the unit

To prevent damages, do not drop the camera or subject it to strong

shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor,

transformer, audio speakers the magnetic field they generate will

distort the image.

rotect from humidity and dust

To prevent damages to the camera, do not install it where there is

greasy smoke or steam, where the dampness may get too high, or

where there is a lot of dust.

rotect from high temperatures

Do not install close to stoves, or other heat generating devices, such

as spotlights, etc., or where it could be subject to direct sunlight, as

that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler

room, as the temperature may raise to high levels.

Install where the temperature range will stay between –10˚C and

0˚C.

(no condensation)

Cleaning

•Dirt can be removed from the cabinet by wiping it with a soft

cloth. To remove stains, wipe with a soft cloth moistened with a

soft detergent solution and wrung dry, then wipe dry with dry soft

cloth.

•Do not use benzine, thinner or other chemical product on the

cabinet, as that may cause deformation and paint peeling. Before

using a chemical cloth, make sure to read all accompanying

instructions. Make sure that no plastic or rubber material comes in

contact with the cabinet for a long period of time, as that may

cause damage or paint peeling.

ENGLISH

L 3S4/XE GB 1999, 6, 16

2 English

ARTS NAMES

1ower indicator ( OWER)

Comes on when the power to the camera is on.

2Video output connector (VIDEO OUT: BNC type)

Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.

3External sync composite video signal input connector (VBS IN: BNC type)

Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite

signal of a video distributor.

4Line phase adjustment volume (LINE HASE)

When using two cameras or more, the image on the monitor may roll vertically when switching sources. This

rolling can be minimized by turning this volume.

524 V AC input terminal (24 V AC, GND)

Using a commercially available AC adaptor.

6Camera setup section (under the cover)

These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However,

if due to installation conditions or environment the settings may need to be modified for best results (see

"SETTINGS").

To access the controls, loosen the cover fixing screw A, then remove the cover.

7Lens iris output connector (LENS)

This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.

L 3S4/XE GB 1999, 6, 16

English 3

ARTS NAMES

1Shorter screws: M3 x 4

2Longer screws: M3 x 6

3Camera mounting screw

hole: 1/4"-20 UNC

8Flange-back adjustment lever (See page 9)

9Flange-back lock screw

FLens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

GCamera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the

longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

When installing the camera support, select a location that can support the total weight of the

camera and accessories.

1232

L 3S4/XE GB 1999, 6, 16

4 English

CONCERNING AUTO-IRIS LENSES

DC type auto-iris lens

A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is

referred to as DC type coil lens or DC type non-amplifier lens.

(Set the A.I. LENS switch to the DC position.)

VIDEO type auto-iris lens

A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is

referred to as EE amplifier type lens.

ALC and LEVEL volume level controls are available on the lens for iris adjustments.

(Set the A.I. LENS switch to the VIDEO position.)

Compatible auto-iris lenses

1/3 inch Sanyo DC type lens 1/2 or 2/3 inch VIDEO type lens

VCL-CS8LY: Standard angle, f= 8 mm Standard angle, f= 9 mm

VCL-CS4LY: Wide angle, f= 4 mm Telephoto angle, f= 12 mm

VCL-CS2LY: Ultra-wide angle, f= 2.8 mm More telephoto angle, f= 16 mm

If using a VIDEO type auto-iris lens

•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned

all the way to Av (Average).

•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL

volume on the lens casing to correct.

VIDEO

A. I.

LENS

L 3S4/XE GB 1999, 6, 16

English 5

MOUNTING THE LENS

lease use a DC type auto-iris lens (sold separately).

Checking the lens mount

Do not use a lens if length “L” is more than 5 mm. If not, that may damage the camera and prevent

proper installation.

1Remove the lens mount cap from the camera.

2Install the auto-iris lens.

CS mount type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mount type lens

To allow for flange-back adjustment, install the supplied C-mount adaptor on the lens mount, then

carefully align the lens mount with the camera opening and turn the lens slowly to install it.

3Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.

When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.

In such a case, remove the original plug and using a soldering iron, connect the supplied lens iris plug

according to the diagram. (Refer to page 7.)

C mount type lens

CS mount

type lens

L 3S4/XE GB 1999, 6, 16

6 English

MOUNTING THE LENS

Rewiring the lens cable in the lens iris plug

1repare the lens cable.

Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each

wire.

2Install the lens iris plug.

Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close

the plug cover.

in layout

DC type lenses VIDEO type lenses

1Brake coil (–) +12 V DC ( 0 mA max.)

2Brake coil (+) Not used

3Drive coil (+) Video output (1.0 Vp-p, high impedance)

4Drive coil (–) Ground (for video signal and DC power)

L 3S4/XE GB 1999, 6, 16

English 7

CONNECTIONS

B sic connection for monitoring or recording

The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately.

1Make the video signal connection between the camera and the monitor or time lapse VCR.

2Connect an AC 24 V power source to the 24 V AC connectors on the back of the camera.

Insert the plug of this power cord into a wall outlet.

The OWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast

controls.

Note:

•Use a commercially available 24 V AC adaptor. Make sure to use a cable with an earth line (22AWG or

more) to connect to the earth connector.

•When installing the camera, use metal brackets to fix the AC adaptor. Then attach it firmly using a

metal strap.

Coaxial cable type and maximum length

•Cable type RG- 9U (3C-2V), 2 0 m maximum.

•Cable type RG-6U ( C-2V), 00 m maximum.

•Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:

•The RG- 9U type cable should not be run through electrical conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

(Video signal connections)

: VIDEO IN

: VIDEO OUT

(A)

L 3S4/XE GB 1999, 6, 16

8 English

FLANGE-BACK ADJUSTMENT

If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of

focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the

flange-back position as described below.

1Using a + screwdriver, loosen the flange-back lock screw (M2:+).

2Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.

3Set the zoom lens to the maximum wide angle position, set the focus using the flange-back adjustment

lever.

4Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle

shot.

When the setting is complete, tighten the flange-back lock screw.

Note:

When flange-back lock screw is completely tighten it will protrude slightly as shown in the illustration (Fig. 1).

Do not tighten the screw further.

Fig. 1

Flange-back lock screw

1, 4

L 3S4/XE GB 1999, 6, 16

English 9

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCC-3924 Bedienungsanleitung

Sanyo

Sanyo VCC-5884E - 1/3" Color CCD DSP High-Resolution... Bedienungsanleitung

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VDC-DP7585P Bedienungsanleitung

Sanyo

Sanyo VCB-3454 Bedienungsanleitung

Sanyo

Sanyo VDC-D1185VP Bedienungsanleitung

Sanyo

Sanyo VCC-9684VA - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VCB-3574IRP Bedienungsanleitung

Sanyo

Sanyo VCC-4795P Kurzanleitung

Sanyo

Sanyo VCC-9400P Bedienungsanleitung

Sanyo

Sanyo VCC-HD2100 - Full HD 1080p Network Camera Bedienungsanleitung

Sanyo

Sanyo VCC-ZM300P Bedienungsanleitung

Sanyo

Sanyo VCC-W8775P Bedienungsanleitung

Sanyo

Sanyo VCC-HD5600P Series Bedienungsanleitung

Sanyo

Sanyo VCC-HD5400 Bedienungsanleitung

Sanyo

Sanyo VCC-WB4000P Bedienungsanleitung

Sanyo

Sanyo VCC-P7574N - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-HD4000 - Network Camera Bedienungsanleitung

Sanyo

Sanyo VCB-3424 Bedienungsanleitung

Sanyo

Sanyo VCC-HD5400 Benutzerhandbuch

Sanyo

Sanyo VCC-HD5600P Series Benutzerhandbuch

Sanyo

Sanyo VCB-3444 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung