SAT-Kabel CATVmeter Bedienungsanleitung
CATVmeter
USER MANUAL
12.05.2014
Firmware 1.06
analog+digital
2
Index
3 – FRONTPANEL&KEYS
4 – NAVIGATION
5 – CONFIGURATIONS
6 – “PLAN” SCREEN AND NAVIGATION
7 – QUALITY MEASUREMENT SCREEN
8– TV
8 – ANALOG TV MEASUREMENT SCREEN
9 – DVB-C DIGITAL CATV MEASUREMENT SCREEN
10 – INGRESS & LEAKAGE MEASUREMENT SCREENS
11 – SPECT11 – SPECTRUM ANALYZER SCREENS
12 – TV: BARSCAN LEVEL/POWER OF ALL CHANNELS
13 – SCAN: CHANNEL PLANS AND LOG FILES
13 – TV: AUTOMEMORY TV
14 – TV: MANUAL MEMORY
15 – LOGGER SAVE & RECALL
16 – BATTERY TEST & BATTERY REGENERATION
17 – LI-ION POLYMER BATTERIES
17 – WARNINGS
18 – POWER SUPPLY & BATTERY CHARGE LED STATUS
19 – METER MAINTENANCE
19 – DISPOSAL of ELECTRONIC EQUIPMENT
3
1HOME Key
2
Press to turn on. Keep pressed to turn off.
MAINS
LED on when the meter is connected to the mains power supply
3 SPECT Key
4
Press to visualize spectrum
BAT. CHRG
5
LED on during battery charge
QUALITY Key
6
Press to visualize signal quality
RF TV Input
7
TV/CATV input connector 47-1.000 MHz
Arrow keys
8
Press to select and adjust values/fields
ENTER
9
Press to select/confirm
USB/Power Supply 5 V power supply connector via MICRO-USB
and for PC connection
Front Panel & Keys
6
5
4
2
3
8 7
1
9
not included
N.B:
To comply with European standards, we used a Micro-USB connector in the instrument,because
the European Community does not recommend providing power supplies. This meter can be
chargedanduseddirectlyfromaPCviatheUSBsocket,orusinganyMICRO-USB,5V,1Apower
supply.
4
• ENTER
• ARROW KEYS
Navigation
• POWER
• RESET HARDWARE • RESET SOFTWARE
To turn on press
the ‘HOME’ key.
To turn off keep the
‘HOME’ keypressed.
Press the arrow keys to
select the menu required
or to adjust the value in a
selected field
(number/menu).
Presstoselectamenu
or to confirm.
With the meter turned
on keep the ‘HOME’ key
pressed for 10 sec. and
then turn on again.
With the meter turned off,
turn the instrument on
keeping the “ENTER” key
pressed and only release
when the boot has been
completed.
5
Press the ‘HOME’ key, use the arrow keys to select “CONFIG”, then press “ENTER”.
Use the arrow keys to select and adjust the settings/values in the various menus.
Configurations
CONFIGURATION OF THE INSTRUMENT PARAMETERS:
COUNTRY CONFIGURATION & DISCOVERY MODE:
LEAKAGE PARAMETERS CONFIGURATION:
INGRESS PARAMETERS CONFIGURATION:
6
“PLAN” Screen and Navigation
Press the “HOME” key, use the arrow keys to select “PLAN”, then press “ENTER”.
• MASTER TV PLAN SELECTION:
• MANUAL MEMORY SELECTION:
• AUTO MEMORY SELECTION:
Use the arrow keys to select the TV MASTER (Tv MASTER PLAN) memory plans you wish
to use, manual (MANUAL MEMORY) or automatic (AUTOtv MEMORY).
7
QUALITY measurement screen
Measure the quality and power of up to 140 channels in blocks of 8 channels.
Pressthearrowkeys toscrollthechannellist.
or
DIGITAL CHANNEL: ANALOG CHANNEL:
POWER
QUALITY
LEVEL
A/V
Select the manual memory
plan required(MANU XX).
Select the automatic
memory plan
required(AUTO XX).
8
TV
TV SIGNAL ANALYSIS
Pressthe“HOME”key,usethearrowkeystoselect“MEAS”,thenpress“ENTER”.
Or keep the “QUALITY” key pressed for 2 seconds.
Analog TV Measurement screen
Signal Level (LEV)Report
carrier VIDEO-AUDIO (V/A)
Use the “LEFT” and “RIGHT” keys to select the
field required.Use the “UP” and “DOWN” arrow
keystoadjustthevalue.Keeppressedtorapidly
adjust.
9
DVB-C Digital CATV Measurement screen
Repeatedly press the “ENTER” key to navigate in the TV measurement screens.Use
the “LEFT” & “RIGHT” keys to select the field required.Use the “UP” & “DOWN” arrow
keys to adjust the value. Keep pressed to rapidly adjust.
Digital Average Power
(PWR)Noise Margin
(N.MAR)Quality (QLY)
MERBER before Viterbi
(bBER)BER after Viterbi
(aBER)
64 QAM Constellation
PresstonavigateintheTVmeasurements
10
INGRESS MEASUREMENT SCREEN
LEAKAGE MEASUREMENT SCREEN
Press the “HOME” key, use the arrow keys to select “INGRESS”, then press “ENTER”.
Press the “HOME” key, use the arrow keys to select “LEAK”, then press “ENTER”.
Inhaltsverzeichnis
Andere SAT-Kabel Messgerät Handbücher
SAT-Kabel
SAT-Kabel IRM?70 SD Bedienungsanleitung
SAT-Kabel
SAT-Kabel AMS-FS433 Bedienungsanleitung
SAT-Kabel
SAT-Kabel SPM 22 PF Bedienungsanleitung
SAT-Kabel
SAT-Kabel IRM 7 Bedienungsanleitung
SAT-Kabel
SAT-Kabel SPM 6PC Bedienungsanleitung
SAT-Kabel
SAT-Kabel IRM 5 MMC Bedienungsanleitung
SAT-Kabel
SAT-Kabel IRM 5 Bedienungsanleitung
SAT-Kabel
SAT-Kabel TVmeter HD-T Einrichtungshandbuch
SAT-Kabel
SAT-Kabel IRM?20 Bedienungsanleitung
