SATA SATAjet 1000 K HVLP Bedienungsanleitung

SATAminijet 1000 K

SATAminijet 1000 H

Betriebsanleitung | Упътване за работа | 使用说明书 | Návod k

použití | Betjeningsvejledning | Kasutusjuhend | Operating Inst-

ructions | Instrucciones de servicio | Käyttöohje | Mode d'emploi |

Οδηγίες λειτουργίας | Üzemeltetési utasítás | Istruzione d'uso | Naudo-

jimo instrukcija | Lietošanas instrukcija | Gebruikershandleiding | Bruks-

veiledning | Instrukcja obsługi | Instruções de funcionamento | Manual de

utilizare | Руководство по эксплуатации | Bruksanvisning | Navodilo za

obratovanje | Návod na použitie | Kullanım talimatı | Operating Instructions

[1]

[1-4] [1-6]

[1-7]

[1-8]

[1-9]

[1-10]

[1-1]

[1-2]

[1-5]

[1-11]

[1-12]

[1-3]

[2]

[2-2] [2-1]

[2-4]

[2-3]

[2-5]

[2-6] [2-7]

[2-8]

[2-9]

109

Operating instructions SATAminijet 1000 K/H RP/HVLP Operating instructions SATAminijet 1000 K/H RP/HVLP

Contents [Original Version: German]

1. Symbols.................................109

2. Technical Data.......................109

3. Scope of Delivery .................. 110

4. Design of the Spray Gun ....... 111

5. Intended Use ......................... 111

6. Safety Instructions................. 111

7. Use ........................................ 113

8. Cleaning of the Spray Gun .... 116

9. Maintenance.......................... 117

10. Trouble-shooting....................120

11. Disposal.................................121

12. After Sales Service................122

13. Warranty / Liability ................. 122

14. Spare Parts............................123

15. EC Declaration of Conformity 124

1. Symbols

Warning! Risk which could cause heavy injuries or death.

Warning! Risk which could cause damage.

Explosion risk! Warning against risk which could cause

heavy injuries or death.

Notice! Useful tips and recommendations.

2. Technical Data

Recommended spray gun inlet pressure

RP 2.5 bar

HVLP 2.5 bar

Compliant > 2.0 bar (air cap pressure > 0.7 bar)

Compliant legislation Lom-

bardy/Italy

< 2.5 bar (air cap pressure < 2.5 bar)

Maximum permissible operating material pressure

5.0 bar

Recommended spraying distance

RP 17 cm - 21 cm

HVLP 10 cm - 15 cm

HVLP Lombardy/Italy 10 cm - 15 cm

[EN | IRL] Operating Instructions | english

110

Operating instructions SATAminijet 1000 K/H RP/HVLP

Max. spray gun inlet pressure

10.0 bar

Air consumption minijet 1000 K RP at 2.5 bar spray gun inlet pres-

sure

minijet 1000 K RP 200 Nl/min

Air consumption minijet 1000 K HVLP at 2.0 bar spray gun inlet

pressure

minijet 1000 K HVLP 120 Nl/min

Air consumption minijet 1000 H RP at 2.5 bar spray gun inlet pres-

sure

minijet 1000 H RP 200 Nl/min

Air consumption minijet 1000 H HVLP at 2.0 bar spray gun inlet

pressure

minijet 1000 H HVLP 120 Nl/min

Maximum temperature of spray medium

50 °C

Compressed air connection

G 1/4 Male thread

Material connection

G 1/4 Male thread

3. Scope of Delivery

SATAminijet 1000 K RP/HVLP:

• Spray gun with nozzle set

• Operating Instructions

• Tool kit

• CCS clips

SATAminijet 1000 H RP/HVLP

• identical to minijet 1000 K RP/

HVLP

111

Operating instructions SATAminijet 1000 K/H RP/HVLP Operating instructions SATAminijet 1000 K/H RP/HVLP

4. Design of the Spray Gun [1]

[1-1] Spray gun handle

[1-2] Trigger

[1-3] Material connection

[1-4] Nozzle set consisting of air

cap,uidtip(notvisible),

paint needle (not visible)

[1-5] Round/atspraycontrol

[1-6] Materialowcontrolscrew

[1-7] Materialowcontrolcounter

nut

[1-8] Air micrometer

[1-9] Airmicrometer(airowcon-

trol) locking screw

[1-10] Air piston (not visible)

[1-11] Compressed air connection

[1-12] ColorCode-System (CCS)

5. Intended Use

The spray gun has been designed for the application of paints, lacquers

and other sprayable media by means of compressed air on suitable sub-

strates and surfaces.

6. Safety Instructions

6.1. General Safety Instructions

Warning! Attention!

• Before using the spray gun, please read all safety and the operating

instructions carefully. Safety instructions and indicated safety meas-

ures are mandatory.

• Please keep all enclosed documents and make sure that the spray

gun is handed over only together with these documents.

112

Operating instructions SATAminijet 1000 K/H RP/HVLP

6.2. Specific Safety Instructions for Spray Guns

Warning! Attention!

• Local safety, accident prevention, work and environment protection

regulations are mandatory!

• Never direct a spray gun at human beings or animals!

• Usage, cleaning and maintenance by skilled personnel only!

• People whose ability to react is impaired by drugs, alcohol, medication

or for other reasons are not allowed to use a spray gun!

• Never use a spray gun when damaged or when components are

missing!Useonlywhenlockingscrewisrmlytightened[1-9]!

• Before use, the spray gun should always be checked and repaired, if

necessary!

• Put spray gun immediately out of operation when damaged, discon-

nect it from the compressed air circuit!

• Never manipulate or technically modify the spray gun!

• Use original SATA spare parts and accessories only!

• Exclusively use spray gun washing machines recommended by SATA!

Please observe the operating instructions!

• Never spray materials containing acid, lye or benzine!

• Alyways keep the spray gun away from ignition sources, such as open

re,burningcigarettesornon-explosion-proofelectronicdevices!

• When working with the spray gun, always limit solvents, paints or

other coating media to the quantities which are required for the paint

job! Excessive material must be returned to the designated storage

areas afterwards!

6.3. Personal Protection Equipment

Warning!

• When using, cleaning or maintaining the spray gun, always wear

approved breathing and eye protection equipment as well as

suitable protective gloves, overalls and safety boots!

• When using the spray gun, noise levels of 85 dB(A) may be exceed-

ed. Wear suitable hearing protection!

113

Operating instructions SATAminijet 1000 K/H RP/HVLP Operating instructions SATAminijet 1000 K/H RP/HVLP

The painter is not exposed to vibrations while using the spray gun. Repul-

sive forces are minimal.

6.4. Use In Explosive Areas

Ex-sign Equipment cat-

egory

Device category Gas category Temperature

category

6.4.1 General

The spray gun is approved for the use / storage in explosive areas of Ex-

Zone 1 and 2.

Warning! Risk of explosion!

• The following applications and operations lead to the loss

of the explosion protection and are, therefore, prohibited:

• Use of the spray gun in explosive areas belonging to ex-zone 0!

• Use of solvents and cleaning agents based on halogenised hydrocar-

bons! Chemical reactions which may occur when using these sub-

stances could be explosive!

7. Use

Warning! Risk of explosion!

• Useonlysolvent-resistant,antistatic,undamagedandtechnicallyaw-

less air hoses with a permanent pressure resistance of minimum 10

bar, e.g. Art. No. 53090!

114

Operating instructions SATAminijet 1000 K/H RP/HVLP

Notice!

Ensure the following conditions:

• UseacompressedairconnectionG1/4malethreadorattingSATA

connection nipple.

• Ensure minimum air volume (air consumption) and pressure setting

(recommended spray gun inlet pressure) according to chapter 2.

• Ensurecleancompressedair,e.g.byinstallingaSATAlter100,Art.

No. 148247, outside the spray boothoraSATAlter484,Art. No.

92320 inside the spray booth

• Use an air hose with minimum 6 mm inner diameter (see warnings),

e.g. Art. No. 53090.

1. Check if all screws [2-1], [2-2], [2-3], [2-4] and [2-5] have been

tightenedrmly.Tightenuidtip[2-1]rmlybyhand(12Nm)accord-

ing to [7-4]. Check if locking screw [2-5]hasbeenrmlytightened

according to [10-1]. Tighten, if necessary.

2. Adjust air cap: vertical spray fan [2-6], horizontal spray fan [2-7].

3. With SATAminijet 1000 K RP/HVLP: Connect the material hose of

the tank or pump to the spray gun material connection.

With SATAminijet 1000 H RP/HVLP: Connect the suction cup,

e.g. SATA RPS 0.3 l cup w/ RPS adapter, to the material connection

[1-3].WhenusingaRPS0.3lsuctioncupset,rstlocatetheplastic

insert into the neck of the RPS cup lid from above before pressing in

thepick-uptubefromunderneathensuringthatitisushwiththetop

of the insert. Then plug the strainer onto the bottom end of the pick-up

tubepriortoconnectingthelidtotheadapter.Finally,screwthelled

RPS cup onto the cup lid.

4. Screw connection nipple [2-8] onto the air inlet.

5. Connect compressed air hose [2-9].

115

Operating instructions SATAminijet 1000 K/H RP/HVLP Operating instructions SATAminijet 1000 K/H RP/HVLP

7.1. Adjustment of spray gun inlet pressure

Notice!

• Fully pull trigger and adjust spray gun inlet pressure (see chapter 2)

according to one of the follwing sections [3-1], [3-2], [3-3] to [3-4],

then release trigger.

• With [3-2], [3-3] and [3-4], the air micrometer [1-8] must be fully

opened/in vertical position.

• If the required spray gun inlet pressure is not reached, the pressure

at the compressed air circuit has to be increased; too high pressure

results in too high trigger forces.

[3-1] SATA adam 2 (accessory / accurate method).

[3-2] Separate gauge with control device (accessory).

[3-3] Separate gauge without control device (accessory).

[3-4] Pressure regulation at the compressed air circuit (most inaccu-

rate method):

Rule of thumb: Pressure at the pressure reducer must be set

0.6 bar higher than the recommended spray gun inlet pressure per

every 10 m of air hose (inner width 6 mm).

7.2. Adjustment of material flow [4-1], [4-2], [4-3] and [4-

4] - material flow control fully opened

Notice!

Withthematerialowcontrolfullyopened,thewearoftheuidtipand

paint needle is reduced to a minimum. Please select the correct nozzle

size depending on the material to be applied and the required applica-

tion speed.

With SATAminijet 1000 K RP/HVLP: Fully pull trigger and adjust re-

quired material supply pressure, e.g. at pressure tank.

7.3. Adjustment of spray pattern

• Adjustmentoftheatfan(factorysetting)[5-1].

• Adjustment of the round fan [5-2].

Andere Handbücher für SATAjet 1000 K HVLP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SATA Spritzpistole Handbücher

SATA

SATA SATAJet 2000 HVLP Bedienungsanleitung

SATA

SATA SATAjet 4000 Series Bedienungsanleitung

SATA

SATA LM 2000 B RP Bedienungsanleitung

SATA

SATA SATAgraph 1 Bedienungsanleitung

SATA

SATA HRS Bedienungsanleitung

SATA

SATA SATAjet K3 Bedienungsanleitung

SATA

SATA SATAjet 3000 A HVLP Bedienungsanleitung

SATA

SATA minijet 4400 B Bedienungsanleitung

SATA

SATA SATAjet 100 B F RP Bedienungsanleitung

SATA

SATA SATAjet 4000 B Bedienungsanleitung

SATA

SATA jet K-NR 95 HVLP Bedienungsanleitung

SATA

SATA SATAjet 3000 B RP Bedienungsanleitung

SATA

SATA jet spray-mix Bedienungsanleitung

SATA

SATA RPS 0,3 I minijet Bedienungsanleitung

SATA

SATA SATAjet 1000 Series Bedienungsanleitung

SATA

SATA SATAJET 3000 K RP/HVLP Bedienungsanleitung

SATA

SATA spray master RP Bedienungsanleitung

SATA

SATA Paint set 10 Bedienungsanleitung

SATA

SATA SATAjet 1000 K HVLP Bedienungsanleitung

SATA

SATA SATAjet 5000 B RP Bedienungsanleitung

SATA

SATA SATAjet 1000 ROB RP Bedienungsanleitung

SATA

SATA SATAjet 1000 K HVLP Bedienungsanleitung

SATA

SATA SATAjet 3000 K spray mix Bedienungsanleitung

SATA

SATA SATAjet 1000 A RP Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

WAGNER

WAGNER W 125 Bedienungsanleitung