Satel STAM-1 TRNK Bedienungsanleitung

®STAM-1 TRNK

stam1trnk_e_09/05

The STAM-1 TRNK card is used for expansion of functional capabilities of the STAM-1

monitoring station. It enables a trunking radiotelephone, which supports the MAP27 data

transfer protocol, or the SATEL GSM module (GSM LT-1, GSM-4), to be connected to the

station, thus making monitoring possible by radio (radiotelephone), by means of SMS

messages, or CLIP-type messages (GSM telephone).

Fig. 1. Schematic view of electronics board.

2 STAM-1 TRNK SATEL

EXPLANATIONS FOR FIGURE 1

1 - RJ-11 connector (RS-TTL port) for trunking radiotelephone.

Data signals from the RS-TTL port of radiotelephone should be supplied to the

following RJ-11 contacts:

1 - TX

2 - RX

4, 6 - common ground

3, 5 - not connected

2 - Four pairs of pins to set individual address of the card.

Particular pin pairs have the following weight: JP10 – weight 1; JP11 – weight 2;

JP12 – weight 4; JP13 – weight 8. To calculate the value of the address set, add

together the weights of pins on which jumpers are placed (e.g. the card address

shown in the figure is equal to 5).

3 - Input socket to connect the main card / expansion card.

4 - Output socket to connect a next expansion card, or final card.

5 - Buzzer.

6 - DB-9 connector (port RS-232) for trunking radiotelephone or GSM-4 module. You

can connect the GSM-4 module to the card by using the typical cable, used for

programming the CA-10, CA-64 or INTEGRA control panels from a computer.

The RS-232 port radiotelephone, depending on the data signal output, requires

installation of a special cable. The signals should be supplied to the following

contacts in the DB-9 connector:

2 - RX

3 - TX

5 - common ground

1, 4, 6, 7, 8, 9 - not connected

The card is designed for installation in the PCI slot of computer, using the computer's RESET

signal and the +12V supply input contacts. Data for the main card and the STAM-1 program

are transmitted by means of an external cable (through socket 3).

The card requires no additional configuration – it recognizes automatically the type of

connected equipment (radiotelephone / GSM module) and is ready to use after appropriate

connections are made.

NOTE: The card only accepts one device (radiotelephone or GSM module of SATEL's

manufacture) connected to one of the following ports: RS-TTL (0V, +5V) or RS-

232 (-12V, +12V).

TECHNICAL DATA

Supply voltage (±10%).................................................................................................. 12V DC

Current consumption........................................................................................................ 40mA

Installation in computer................................................................................................. PCI slot

SATEL sp. z o.o.

ul. Schuberta 79

80-172 Gdańsk

POLAND

tel. +48 58 320 94 00

info@satel.pl

www.satel.pl

The latest EC declaration of conformity

and product approval certificates are

available for downloading on our

website www.satel.pl

Inhaltsverzeichnis

Andere Satel Steuereinheit Handbücher

Satel

Satel INT-RX-S Bedienungsanleitung

Satel

Satel GSM-4S Bedienungsanleitung

Satel

Satel PK-01 Bedienungsanleitung

Satel

Satel GPRS-A Bedienungsanleitung

Satel

Satel MZ-1 Bedienungsanleitung

Satel

Satel ACCO Series Bedienungsanleitung

Satel

Satel SATELLINE-M3-TR1 Bedienungsanleitung

Satel

Satel GSM LT-2 Bedienungsanleitung

Satel

Satel CA-64 ADR-MOD Bedienungsanleitung

Satel

Satel GSM-4 Bedienungsanleitung

Satel

Satel ETHM-A Bedienungsanleitung

Satel

Satel ETHM-1 Bedienungsanleitung

Satel

Satel GSM-X Bedienungsanleitung

Satel

Satel DT-1 Bedienungsanleitung

Satel

Satel MZ-1 Bedienungsanleitung

Satel

Satel INT-VG Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel INT-KNX-2 Bedienungsanleitung

Satel

Satel GPRS-T6 Bedienungsanleitung

Satel

Satel SATEL-TR49 SnapOn Kurzanleitung zur Einrichtung

Satel

Satel MICRA Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel ETHM-A Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung