Satel SATEL-TR49 SnapOn Kurzanleitung zur Einrichtung

SATEL-TR49

TRANSCEIVER MODULE

INTEGRATION GUIDE

Version 1.7

SATEL-TR49

Integration Guide, V 1.7

IMPORTANT NOTICE

All rights to this manual are owned solely by SATEL Oy (referred to in this user guide as SATEL). All

rights reserved. The copying of this manual (without the written permission from the owner) by

printing, copying, recording or by any other means, or the full or partial translation of the manual

to any other language, including all programming languages, using any electrical, mechanical,

magnetic, optical, manual or other methods or devices is forbidden.

SATEL reserves the right to change the technical specifications or functions of its products, or to

discontinue the manufacture of any of its products or to discontinue the support of any of its

products, without any written announcement and urges its customers to ensure, that the

information at their disposal is valid.

SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind of

warranty including guarantees on suitability and applicability to a certain application. Under no

circumstances is the manufacturer or the developer of a program responsible for any possible

damages caused by the use of a program. The names of the programs as well as all copyrights

relating to the programs are the sole property of SATEL. Any transfer, licensing to a third party,

leasing, renting, transportation, copying, editing, translating, modifying into another

programming language or reverse engineering for any intent is forbidden without the written

consent of SATEL.

SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE USED IN

ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTION NOR AS A PART OF ANY

OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY IF THEY ARE USED

IN ANY OF THE APPLICATIONS MENTIONED.

Salo, FINLAND 2021

No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without

the prior written permission of SATEL Oy.

SATEL-TR49

Integration Guide, V 1.7

RESTRICTIONS ON USE – SATEL-TR49

SATEL-TR49 radio transceiver module has been designed to operate on 410-475 MHz and 902-

928 MHz, the exact use of which differs from one region and/or country to another. The user of a

radio transceiver module must take care that the said device is not operated without the

permission of the local authorities on frequencies other than those specifically reserved and

intended for use without a specific permit.

SATEL-TR49 operating on 410-475 MHz band is allowed to be used in the following countries,

either on license free channels or on channels where the operation requires a license. More

detailed information is available at the local frequency management authority.

Countries: AT, BE, BG, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LT, LU, LV, MT,

NL, NO, PL, PT, RU, RO, SE, SI, SK, US.

WARNING! Users of SATEL-TR49 radio transceiver modules in North America should be aware, that due to

the allocation of the frequency band 406.0 –406.1 MHz for government use only, the use of radio

transceiver module on this frequency band without a proper permit is strictly forbidden.

WARNING - RF Exposure

To comply with FCC and IC RF exposure compliance requirements, maximum antenna gain is 14

dBi and separation distance of at least 1.2 meter must be maintained between the antenna of

this device and all persons. This device must not be co-located or operating in conjunction with

any other antenna or transmitter.

Host product labeling requirements

SATEL–TR49 is intended to be integrated into a host device. Therefore the SATEL–TR49 product

related FCC ID and IC ID must be visible in the host device chassis:

FCC ID: MRBSATEL-TA37

IC ID: 2422A-SATELTA37

This integration guide applies to the combination of Firmware/Hardware version listed in the

table below. See www.satel.com for the newest firmware and Integration Guide version.

Firmware version

Hardware version

Note!

07.45.2.3.2.11

SPL0060a

First official release

SATEL-TR49

Integration Guide, V 1.7

RESTRICTIONS ON USE – SATEL-TR49

SATEL-TR49 operating on 902-928 MHz band is allowed to be used in the following countries.

More detailed information is available at the local frequency management authority.

Countries: AU, CA, NZ and US.

This radio transmitter 2422A-SATELTA37 has been approved by FCC and Industry Canada to

operate with the antenna types listed below with the maximum permissible gain indicated.

Antenna types not included in this list or having a gain greater than the maximum gain indicated

for that type, are strictly prohibited for use with this device.

Antenna type

Manufacturer

Antenna model

Maximum gain (dBi)

Omnidirectional

Oy CompleTech Ltd

CA915H-TNC_A

Directional (yagi)

Oy CompleTech Ltd

CA930Y

NOTE!

According to the requirements of the FCC, the integrator should make sure that the SATEL-TR49

is compliant to part 15C while integrated in the host device. Output power and spurious

emissions should be verified.

NOTE!

•This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

WARNING - RF Exposure

To satisfy FCC and ISED RF exposure requirements for mobile transmitting devices, a

separation distance of 25 cm or more should be maintained between antenna of this device

and persons during device operation. To ensure compliance, operations at closer than this

distance is not recommended. The antenna used for this transmitter must not be co-located

in conjunction with any other antenna or transmitter. FCC regulations allow up to 36 dBm

equivalent isotropically radiated power (EIRP). Therefore, the sum of the transmitted power

(in dBm), the cabling loss and the antenna gain cannot exceed 36 dBm.

SATEL-TR49

Integration Guide, V 1.7

PRODUCT CONFORMITY

Hereby, SATEL Oy declares that SATEL-TR49 radio transceiver module is in compliance with the

essential requirements (radio performance, electromagnetic compatibility and electrical safety)

and other relevant provisions of Directive 2014/53/EU. Therefore, the equipment is labeled with

the following CE-marking.

For 902-928 MHz only:

This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device. Changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority to operate the equipment.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne

doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

SATEL-TR49

Integration Guide, V 1.7

WARRANTY AND SAFETY INSTRUCTIONS

Read these safety instructions carefully before using the product:

-Warranty will be void, if the product is used in any way that is in contradiction with the

instructions given in this manual

-The radio transceiver module is only to be operated at frequencies allocated by local

authorities, and without exceeding the given maximum allowed output power ratings.

SATEL and its distributors are not responsible, if any products manufactured by it are used

in unlawful ways.

-The devices mentioned in this manual are to be used only according to the instructions

described in this manual. Faultless and safe operation of the devices can be guaranteed

only if the transport, storage, operation and handling of the device are appropriate. This

also applies to the maintenance of the products.

SATEL-TR49

Integration Guide, V 1.7

HOST INTEGRATION

To ensure compliance with all non-transmitter functions the host manufacturer is responsible

for ensuring compliance with the module(s) installed and fully operational. For example, if a

host was previously authorized as an unintentional radiator under the Declaration of

Conformity procedure without a transmitter certified module and a module is added, the host

manufacturer is responsible for ensuring that after the module is installed and operational the

host continues to be compliant with the Part 15B unintentional radiator requirements. This

module is certified for Fixed and Mobile Applications only, for portable applications you will

require a new certification.

This device has been modularly approved. Model name, FCC and Industry Canada identifiers of

this product must appear on the outside label of the end-user equipment.

Host labelling example:

Model Name: SATEL-TR49

Contains FCC ID: MRBSATEL-TA37

IC: 2422A-SATELTA37

This device complies with part 15 of the FCC

rules. Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

SATEL-TR49

Integration Guide, V 1.7

TABLE OF CONTENTS

IMPORTANT NOTICE............................................................................................... 1

RESTRICTIONS ON USE –SATEL-TR49 ................................................................... 2

RESTRICTIONS ON USE –SATEL-TR49 ................................................................... 3

PRODUCT CONFORMITY ........................................................................................ 4

WARRANTY AND SAFETY INSTRUCTIONS ............................................................. 5

HOST INTEGRATION ............................................................................................... 6

TABLE OF CONTENTS ............................................................................................. 7

1INTRODUCTION ....................................................................................... 11

1.1 Terms and abbreviations ......................................................................... 11

1.2 Description of the product....................................................................... 11

2TECHNICAL SPECIFICATIONS................................................................... 12

2.1 Absolute maximum ratings...................................................................... 12

2.2 DC electrical specifications ...................................................................... 12

2.3 Specifications, SATEL-TR49 (on 410-475 MHz)......................................... 13

2.4 Specifications, SATEL-TR49 (on 902-928 MHz)........................................ 15

3TIME PARAMETERS FOR STARTUP AND SHUTDOWN SEQUENCES........... 17

3.1 Startup sequence ..................................................................................... 17

3.2 Shutdown and ENA sequences ................................................................ 18

4ELECTRICAL INTERCONNECTION ............................................................. 19

SATEL-TR49

Integration Guide, V 1.7

4.1 DTE connector .......................................................................................... 19

4.2 Pin order of the DTE connector................................................................ 20

4.3 Equivalent I/O Schematics ....................................................................... 21

4.4 VCC_IO pin ............................................................................................... 22

4.5 Service pin................................................................................................ 22

4.6 Stat pin ..................................................................................................... 23

4.7 VCC pins................................................................................................... 23

4.8 UART pins................................................................................................. 23

4.9 GPIO pins .................................................................................................. 23

4.10 Antenna interface .................................................................................... 24

5MECHANICAL CONSIDERATIONS ............................................................. 25

5.1 Fixing device to host ............................................................................... 25

5.2 Module dimensions .................................................................................. 26

6CONFIGURATION..................................................................................... 27

6.1 SATEL Configuration Manager software .................................................. 27

6.2 Changing parameters using SL commands.............................................. 28

6.2.1 SL Commands.......................................................................................................................... 28

6.3 SL Command Mode ................................................................................... 29

7SERIAL INTERFACE .................................................................................. 30

7.1 Pause length............................................................................................. 30

7.2 Data buffering .......................................................................................... 31

8RADIO PARAMETERS (ON 410-475 MHZ) ................................................ 32

SATEL-TR49

Integration Guide, V 1.7

8.1 Transmitter ............................................................................................... 32

8.2 Receiver.................................................................................................... 33

8.3 Encryption ................................................................................................ 33

8.4 Radio state ............................................................................................... 34

8.5 Priority RX/TX.......................................................................................... 35

8.6 Forward Error Correction (FEC)................................................................ 35

8.7 Error checking.......................................................................................... 35

8.8 TX Delay ................................................................................................... 36

8.9 Add RSSi to data ...................................................................................... 36

8.10 Separate TX/RX frequencies ................................................................... 36

8.11 User data whitening................................................................................. 36

8.12 Call Sign.................................................................................................... 37

8.13 Channel list............................................................................................... 37

8.14 Repeater –mode....................................................................................... 38

8.15 Pacific Crest and TRIMTALK compatibility............................................... 38

8.15.1 Settings in compatibility modes ...................................................................................... 40

8.15.2 Repeater function.................................................................................................................. 42

8.15.3 Support for Local / Remote addresses.......................................................................... 42

8.15.1 Transmission delays ............................................................................................................. 42

9TEST MODES............................................................................................ 44

9.1 Short Block Test ....................................................................................... 44

9.2 Long Block Test........................................................................................ 44

10 OPERATING MODES................................................................................. 45

10.1 Safe mode................................................................................................. 45

Andere Handbücher für SATEL-TR49 SnapOn

Inhaltsverzeichnis

Andere Satel Steuereinheit Handbücher

Satel

Satel STAM-1 TRNK Bedienungsanleitung

Satel

Satel INT-RX Bedienungsanleitung

Satel

Satel ETHM-2 Bedienungsanleitung

Satel

Satel GSM-X Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel INT-GSM Bedienungsanleitung

Satel

Satel INT-KNX-2 Bedienungsanleitung

Satel

Satel GSM-4S Bedienungsanleitung

Satel

Satel GSM-4S Bedienungsanleitung

Satel

Satel ETHM-A Bedienungsanleitung

Satel

Satel GSM-4 Bedienungsanleitung

Satel

Satel SATEL-LP8 Kurzanleitung

Satel

Satel KNX-BIN24 Bedienungsanleitung

Satel

Satel INT-RX-S Bedienungsanleitung

Satel

Satel INT-VG Bedienungsanleitung

Satel

Satel INT-KNX Bedienungsanleitung

Satel

Satel ACCO Series Bedienungsanleitung

Satel

Satel INT-VG Bedienungsanleitung

Satel

Satel ETHM-1 Plus Bedienungsanleitung

Satel

Satel INT-AV Bedienungsanleitung

Satel

Satel MZ-1 Bedienungsanleitung

Satel

Satel MST-1 Bedienungsanleitung

Satel

Satel MICRA Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung