SatKing SK-500A Bedienungsanleitung
1
English
CONTENTS
1. GUIDE ..............................................................................................................2
1.1 IMPORTANT SAFETY INSTRUCTIONS ..................................................................................2
1.2 UNPACKING ..................................................................................................................................2
1.3 PRODUCT OVERVIEW& ILLUSTRATION ..............................................................................3
1.4 INSTALLATION OF METER .......................................................................................................4
2. OUTLINE ..........................................................................................................5
3. THE MENU OSD INSTRUCTION ......................................................................6
3.1 DVBT2 ...........................................................................................................................................6
3.2 DVBC .............................................................................................................................................8
3.3 CHANNEL.......................................................................................................................................9
3.4 SPECTRUM..................................................................................................................................10
3.5 MULTIMEDIA ...............................................................................................................................11
3.6 SYSTEM SETTING...................................................................................................................... 12
4. TECHNICAL SPECIFICATION ......................................................................... 15
5. TROUBLE SHOOTING .....................................................................................17
2
1. GUIDE
1.1 IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing our product. Before installation, we would like to
remind you some notes, which is very important for operating safely and
properly, as follows:
• Be sure to read this user manual before starting your operation.
• You must install the dish with correct direction and angle. If the dish is not
working properly, contact your local dealer.
• When the unit is suddenly moved to a hot area from a cold area, it may
cause some problems. In that case, turn o the power, and turn on again
after 1-2 hours.
• Keep meter placed in clean space with sucient ventilation.
• Do not cover the meter with or place it on a unit that emits heat.
• Clean the case by a soft cloth with a little washing liquid.
• Do not remove the cover.
• Do not let the unit exposed to extreme heat, cold or humid conditions.
• No liquids or any other materials to come inside of the unit.
1.2 UNPACKING
Open the package and make sure it includes all below items, if any missing,
please contact the reseller for replacement.
1. Digital Satellite Meter
2. User’s manual
3. AV cable
4. Car charger cable
5. Power Adaptor
6. Strap of carrying case
NOTE: Please refer to our actual configuration.
3
English
1.3 PRODUCT OVERVIEW& ILLUSTRATION
NO Description FUNCTION
1 LNB In Connect to satellite antenna cable
2 AV OUT Connect to AV port for TV
3 AV IN Connect to AV port for meter
4 USB Port Connect to USB memory
5 DC Slot Connect to adaptor input
6 Power Switch Turn on/o meter
7 Speaker Speaker integrated
8 Torch LED Night lighting
9 HD OUT Use HD cable to connect for TV
10 LCD TFT LCD Screen
11 Power Power indicator light
12 22KHz 22KHz indicator light
13 13V/18v Vertical /Horizontal polarization voltage output light
14 LOCK Signal lock indicator light
15 Charger (Note1) Charger indicator light
16 F1 Auxiliary function key
17 F2 Auxiliary function key
18 F3 Auxiliary function key
19 SCAN ‘Quick Search’menu shortcut key
20 AV-S(Note2) Switch AV mode: AV Normal; AV IN and AV out
21 NEVIGATION KEY Volume Control or move cursor, channel or change,
confirmetc
4
NO Description FUNCTION
22 MENU Show the main menu on the screen or jump back to
previous menu in sub-menu setting conditions
23 EXIT Escape from present menu and save the settings
24 0-9 Number key to select channels or enter programming
25 INFO INFO key
26 MUTE MUTE
27 Red & TTXT Red KEY & Teletext interface
28 Green & SUBT Green key & Subtitle interface
29 BLUE &AUDIO Blue key & Audio interface
30 Orange &TV/R Orange key & TV and radio switch
31 DC 12V output for extern equipment
32 DC 12V OUTPUT DC 12V output for extern equipment
33 HD IN HD signal input port
Note1: When the battery charged sucient, the charge indicator is going out. When
the battery is insucient, indicator flashing.
1.4 INSTALLATION OF METER
5
English
2. OUTLINE
• 3.5 Inch High Definition TFT LCD Screen
• Fully DVB-T/DVB-T2/DVB-C, MPEG-2/MPEG-4 compliant
• H.264 Hardware decoding
• Digital meter for signal strength and quality
• Supports scan of Auto,Manual
• Sound and Light Alarm for Locking Signal
• Speaker Integrated
• Support both AV out and AV in
• Support both HD out and HD in
• ANT short protect
• 7.4V/3000mAh Li-Ion Battery Included
• DC 12V output for monitor
• Software upgrade via USB port
• Easy to carry
6
3. THE MENU OSD INSTRUCTION
If you have installed and connected the cables to the receiver, pressing MENU
to display the Main Menu.
• DVB-T2
• DVB-C
• Channel
• Spectrum
• Multimedia
• System Setting
Press the keys of YZAB to move the cursor up or down in the menu
interface, then use OK to confirm a selection.
3.1 DVB-T2
Select DVB-T2, then press OK into the
Scan Setup.
3.1.1 COUNTRY SETTING
Press AB key to change the default country.
3.1.2 CHANNEL NO
Press AB key to change the channel number.
3.1.3 FREQUENCY
Frequency of the current channel, input the value by using the numeric keys.
3.1.4 BANDWIDTH
Press AB key to change the bandwidth, we can select 5, 6, 7 or 8M.
3.1.5 MODE
Press AB key to change the DVB standard, we have there types including T/
7
English
T2/T+T2, you can select one you want.
3.1.6 BEEP TONE
Press AB key to switch beep tone ON/OFF. If we open the beep tone, when
we enter into the search screen, the beep of lock alarm will open.
3.1.7 ANTENNA SETTING
Press AB key to change the antenna power, we have there types including
12v/18V/24v, you can select one you want.
3.1.8 ANTENNA SETTING
Press AB key to switch the antenna power ON/OFF .
3.1.9 QUICK SEARCH
In the Channel Find interface, press OK to
enter into the quick search.
• Ch Scan: Press OK/red key to search current
channel.
• Auto Scan : Press green key to auto blind
search the current channel.
8
• S/Q: Press orange key to enlarge showing of
the signal strength and quality.
• Constellation: Press the blue key into the
constellation.
3.2 DVB-C
Select DVB-C, then press OK into the Scan
Setup.
3.2.1 COUNTRY SETTING
Press AB key to change the default country.
3.2.2 CHANNEL NO
Press AB key to change the channel number.
3.2.3 FREQUENCY
Frequency of the current channel, input the value by using the number keys.
3.2.4 BEEP TONE
Press AB key to switch beep tone. If we open the beep tone, the beep of
lock alarm will open when we enter into the search screen.
9
English
3.2.5 QUICK SEARCH
Please refer to 3.1.9 QUICK SEARCH.
3.3 CHANNEL
We have four options in this menu.
3.3.1 PROGRAM INFO
When we receive signal, we can scan some
relative parameter information in this
interface.
3.3.2 TV LIST
• Sort
Press red key into the sort list. Use YZ key
to move the cursor, then press OK to select
the type of sort we want, then press OK to
confirm or move the cursor to “x” and press
OK to cancel.
• Lock
Press YZ key to the program that we want
to lock or unlock, then press green key to lock
or unlock the program. When we have dealt
with all the programs need to be processed,
press MENU , it will appear a comfirmation
message. Then press OK to confirm the
operation or select “x” by pressing OK to
cancel.
Inhaltsverzeichnis
Andere SatKing Messgerät Handbücher
