SC&T HE05BT Gebrauchs- und Pflegehandbuch

Andere Handbücher für HE05BT

4

Dieses Handbuch passt für folgende Modelle

7

Inhaltsverzeichnis

Andere SC&T Extender Handbücher

SC&T

SC&T VKM02 Bedienungsanleitung

SC&T

SC&T HD401F-5M Bedienungsanleitung

SC&T

SC&T IP05I Bedienungsanleitung

SC&T

SC&T HE02ER Bedienungsanleitung

SC&T

SC&T IP09K Bedienungsanleitung

SC&T

SC&T HE02ER Bedienungsanleitung

SC&T

SC&T HE02EIR Bedienungsanleitung

SC&T

SC&T HE02N Bedienungsanleitung

SC&T

SC&T HE02EX Bedienungsanleitung

SC&T

SC&T CA101HDP Bedienungsanleitung

SC&T

SC&T VW01HA Bedienungsanleitung

SC&T

SC&T HE01F-4K Bedienungsanleitung

SC&T

SC&T KM03 Bedienungsanleitung

SC&T

SC&T IP09P Bedienungsanleitung

SC&T

SC&T IP02ET Bedienungsanleitung

SC&T

SC&T VKM01 Bedienungsanleitung

SC&T

SC&T VKM03T Bedienungsanleitung

SC&T

SC&T HE02P Bedienungsanleitung

SC&T

SC&T HKM01 Bedienungsanleitung

SC&T

SC&T HE01C Bedienungsanleitung

SC&T

SC&T HKM01BT Bedienungsanleitung

SC&T

SC&T IP03PT Bedienungsanleitung

SC&T

SC&T HE01F Series Bedienungsanleitung

SC&T

SC&T HE01S Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

ASUSTOR

ASUSTOR AS5004U Bedienungsanleitung

HDV over IP firmware update SOP

To update firmware, you could input the IP address of transmitter / receiver at link column of browser if

you know the exact IP address of them.

There are three ways to get the IP address of receiver:

1. Connect monitor with receiver, local IP shows on right bottom screen when receiver booting or

transmitter not connected( or no video input)

2. Press remote control button [MENU] [1] [ENTER] (IP Address), it will shows the receiver IP

Address on screen

3. Install Internet explorer plug-in: Bonjour , click device name to enter web setting page to get the IP

address(please refer Bonjour plug-in installation)

There are three ways to get the IP address of transmitter:

1. Connect monitor with receiver, connect receiver with transmitter and set in the same

channel, remote IP shows on right bottom screen when receiver booting or no video input from

transmitter

2. Connect monitor with receiver, connect receiver with transmitter and set in the same

channel, press remote control button [MENU] [2] [ENTER] (Host IP Address) at receiver side, it will

shows the transmitter IP Address on screen(must remove the HDMI cable of transmitter or turn off

the video source).

3. Install Internet explorer plug-in: Bonjour , click device name to enter web setting page to get the IP

address(please refer Bonjour plug-in installation)

System default IP setting is Auto IP, it will assign 169.254.X.X (subnet mask 255.255.0.0) to

transmitters and receivers, you could also set to DHCP or Static IP.

You computer must set in same subnet mask to enter the web setup page.

1. Copy the firmware files to PC

 Webfw-TX.bin  HKM01T, DKM01BT, VKM03BT, HE05BT,

 Webfw-RX.bin  HKM01R, VDKM01BT, HE05BR, HE05BER

2. Install BonjourSDKSetup.exe if you do not know the IP address of transmitter/receiver

3. Right click on “My Network Place”  “Properties” then right click on “Local Area Connection” 

“Properties” then double click on “Internet Protocol (TCP/IP)” to setting as below: (IP address

169.254.111.111, sub mask 255.255.0.0)

4. Use CAT5 cable to connect transmitter RJ45 port to PC LAN port, open IE browser then select

View  Explorer Bars  Bonjour.

5. Double click on “HTTP on ast-gateway(HKM01T)” or “HTTP on ast-client (HKM01R)”, it will pop up

web setup in Bonjour windows as below:

6. Select “Update Firmware”

7. Click “Select file”

8. Choice the firmware:

 Webfw-TX.bin  HKM01T, DKM01BT, VKM03BT, HE05BT,

 Webfw-RX.bin  HKM01R, VDKM01BT, HE05BR, HE05BER

9. Click “Upload”

10. It will start update progress

11. It will show “DONE. Rebooting” after update finished, please power off then on again.

12. Refresh web page and you will see two new tabs : Network and Functions.

Switch to Network page and select Multicast then Apply

13. Updating

14. After finished it will show warning message, please reboot the device the take settings effect.

15. Login HKM01R again, click “Functions” page

16. Check “Copy EDID from this Video Output” and apply

In multiple connections the EDID will copy from the last connected receiver.