R110
3
Owner’s manual
Introduction
Thank you for choosing R110. We hope our product
will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this receiver.
After unpacking please check for any damage from
transport. We recommend that you keep the original
carton box and packing material for any future
shipping.
In the carton box you will nd:
1 Remote control
1 FM/DAB antenna
1 Wi-Fi antenna
1 Mains cable
R110 installation
The receiver requires connection to the mains power
supply, so for your safety it is important that you read
this manual carefully.
First switch off all equipment when connecting your
R110.
R110 positioning
Place the amplier on a solid and plane surface. Avoid
placement on carpets and other soft surfaces.
Secure that there is plenty of ventilation around the
amplier, minimum 4” (100mm) free space behind and
above the amplier.
Do not cover the ventilation holes on the backside of
the amplier.
Care and cleaning
We don’t recommend use of any solvents or cleaners
on R110 lacquered cabinets. The cabinet surface
usually only requires dusting or cleaning with a soft
cloth (do not use water).
Disconnect the unit from the mains supply if taken out
of use for a longer period.
Environmental information
The R110 complies with international directives on
the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment and the disposal
of Waste Electrical and Electronic Equipment (WEEE)
- the crossed bin symbol indicates compliance and
that the products must be appropriately recycled or
processed in accordance with these directives.
CAUTION, read this rst
READ, FOLLOW, HEED, AND KEEP ALL
INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON
THIS APPARATUS.
DO NOT USE THIS APPARATUS NEAR
SPLASHING, FALLING, SPRAYING, OR STANDING
LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND
DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED,
SAFETY GROUNDED OUTLET WIRED TO
CURRENT ELECTRICAL CODES AND COMPATIBLE
WITH VOLTAGE, POWER, AND FREQUENCY
REQUIREMENTS STATED ON THE REAR PANEL
OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE
DUE TO BEING WALKED ON, PINCHED, OR
STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING
STORMS OR WHEN UNUSED FOR LONG
PERIODS OF TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES
SPECIFIED BY THE MANUFACTURER FORSAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product
