Schertler SA
Via Beroldingen 18
6850 Mendrisio
Switzerland
T +41 (0)91 6 0 07 10
F +41 (0)91 6 0 07 11
info@schertler.swiss
www.schertler.swiss
Facebook @schertler.sa
Instagram @schertleraudio
Youtube @Schertler SA
#shareyourschertler
QUICK GUIDE V1
STAT series
QUICK GUIDE
THANK YOU
FOR
CHOOSING
SCHERTLER
QUICK START
INSTALLATION
The pickup should be tted in the bridge hole under
the higher strings with the cork facing upwards.
The upper side of the cork must be led so that it
matches the top of the bridge hole exactly.
Once installed, is the pickup is too loose in position,
it might get a low output signal, while if it is installe
dtoo tightly, the sound might result boomy or
distorted.
Please refer to the USER GUIDE for all the details.
CONNECTION
Connect the STAT pickup to an instrument channel
of a preamp, amp or mixer.
The pickup requires 10V to work so remember to
eventually provi e it (this is one automatically on
the STAT PRE, but must be activate on YELLOW
preamps, any SCHERTLER acoustic amp or mixer).
USER GUIDE available at www.schertler.co
Scan the QR code
to open
the USER GUIDE
