Schiit LYR+ Bedienungsanleitung

FUSION ARCHITECTURE HEADPHONE AMP & PREAMP

LYR+ GIVES YOU THE ULTIMATE CHOICE:

TO GO WITH OR WITHOUT TUBE!

NO TUBE? LYR+ SWITCHES TO ITS INTERNAL MOSFET GAIN STAGE.

WITH TUBE? LYR+ SWITCHES TO THE TUBE GAIN STAGE—

AND YOU CAN PICK YOUR MODE WITH REMOTE CONTROL.

OH, AND DID WE SAY REMOTE? AND RELAY LADDER VOLUME?

LYR+ IS THE MOST ADVANCED COMPACT PRODUCT WE’VE MADE, EVER.

LYR+

OWNER’S MANUAL

The following is required by the roughly 9,542

government agencies and regulations we have to

comply with. If you have some common sense, they

should seem pretty straightforward. In any case, read these

instructions before proceeding farther, follow all instructions,

and heed all warnings. Or else!

1. If you don’t know how to install audio devices, get a

qualied professional to help.

2. Never use this device near water, and clean only with a

dry cloth.

3. Assure adequate ventilation, do not block any ventilation

openings, or place near heat sources.

4. Use only the supplied power cord or suitable replacement.

Route cords away from trac areas and protect them from

being pinched. Unplug the cord from the outlet if the apparatus

is unused for a long period of time.

5. To prevent electric shock, do not use the plug with an

extension cord, receptacle, or outlet unless blades can be

fully inserted.

6. Refer all servicing to qualied service personnel. Service is

required when the device has been damaged, including cord or

plug damage, liquid has been spilled or objects have fallen into

the device, the device has been exposed to rain or moisture,

does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO

RAIN OR MOISTURE.

Lyr+ is the most advanced desktop-sized

product we’ve ever produced. Combining all-new

Fusion Architecture™ that lets you use tube or

solid state gain, relay ladder volume control,

advanced microprocessor protection, and re-

mote control, it’s a technological tour de force.

Now, you can roll all the tubes you want...and

still have a great solid-state amp whenever you

want. We hope you enjoy your time with Lyr+—

we certainly had plenty of fun developing it!

INTRODUCTION

WHAT’S IN THE BOX

(1) Lyr+

(1) Lyr+ Tube Cover

(1) Power cord

(1) 6SN7 type tube (if you ordered it with Lyr+)

No Tube? It’s easy. Just plug in Lyr+ and turn it

on. It’ll stay muted while everything stabilizes,

then enable everything for you to enjoy.

If you aren’t going to use a tube for a while, you

can cover the hole with the supplied Tube Cover.

Yes Tube? It’s still easy. Just follow these steps:

1. Before plugging in, insert the tube. Carefully

align the key in the tube base to the notch in the

tube socket.

2. Ensure tube is well-seated.

Push down rmly until the tube

is seated on the tube socket.

3. Plug in and turn on. The

tube will glow after a few sec-

onds, then Lyr+ will stay muted for self-checks,

then enable output.

4. Connect your system. Plug in up to two

sources, plug in your headphones, and, if you

like, use the preamp outputs for a speaker amp

or sub. And enjoy!

Replacing or Swapping Tubes

1. Turn off and unplug. Wait for the tube to cool.

2. Carefully extract the tube by gently rocking it

back and forth and pulling upwards.

3. Carefully insert the replacement tube. Align

the key to the notch and press down rmly until

the tube is seated.

4. Plug the Lyr+ back in and turn it on.

NOTCH

GETTING STARTED

012345678

115VAC 30W

ASSY IN USA

VOLUME

INPUT PREOUT

MUTE

GAIN

MODE

012345678

115VAC 30W

ASSY IN USA

VOLUME

INPUT PREOUT

MUTE

GAIN

MODE

4 MOSFET Indicator. When this light is on, Lyr+

is using its internal solid-state gain stage. When

it’s off, then it’s running tube gain. Remember, you

can’t run tube gain without a tube!

5 Gain Select. Push this button to toggle between

low and high gain modes. The light to the right

of this button will glow when Lyr+ is in high gain

mode. Be careful of selecting high gain without

turning down the volume rst—high gain is high!

6 Headphone Jack. Plug your headphones in

here, using a standard 1/4” TRS plug.

1 Input Select. Press this button to toggle be-

tween the two inputs. To the right of the button,

the selected input lights up to indicate, well, the

selected input.

2 Preamp Output Enable. Push the button to

enable and disable the preamp output. The light

to the right of the button is on when the preamp

outputs are enabled.

3 Volume Control. Turn up till the music sounds

good, but before your ears turn to taffy.

CONTROLS

1 2 3

Yes, Lyr+ comes with a remote control. And yes, we know it

may seem kinda silly if you’re using Lyr+ on your desk, but

when you’re using it as the focal point of an entire system,

well, maybe it’s not so crazy, right?

1 Input. Press this button to select the input you want to listen

to. If you skip the input, keep pressing—it cycles back around.

2 Tube/MOSFET Mode. When you have a tube installed,

you can switch back and forth between tube and MOSFET

gain modes by pressing this button. If you don’t have a tube

installed, this button won’t do anything.

3 Gain. Toggle between low and high gain with this button.

We recommend turning down the volume before switching to

high gain, as it is signicantly higher than low gain.

4 Mute. Press to mute Lyr+—headphone, preamp outs,

everything goes off.

5 Preamp Output Enable/Disable. Press to enable or disable

the preamp outputs.

6 Volume Up/Down. Press the up arrow to turn volume up,

press the down arrow to turn it down. Simple!

REMOTE CONTROL

012345678

115VAC 30W

ASSY IN USA

VOLUME

INPUT PREOUT

MUTE

GAIN

MODE

3 On-Off Switch. Up is on. Down is off. Pretty

simple, right?

4 AC Input. Plug the power cord in here. Plug the

other end into an outlet of the correct voltage.

Trying to run a 115V product on 230V will blow the

fuse and generally make for a bad, bad day.

1 RCA Inputs.

Connect up to 2 inputs to Lyr+ using RCA cables.

The inputs are conveniently numbered “1” and

“2” to match the front panel indicators. Select the

input you want to listen to using the front panel

button or the remote control.

2 Preamp Output.

Optionally, connect this output to a separate

power amp (or subwoofer) using RCA cables. You

can switch on and off the preamp output using

the front panel button or the remote control.

012345678

115VAC 30W

ASSY IN USA

VOLUME

INPUT PREOUT

MUTE

GAIN

MODE

CONNECTIONS

1 2 3 4

There’s no sound for quite a long time after I turn

Lyr+ on.

That’s perfectly normal. Lyr+ monitors operational

parameters as it is turning on, and only connects

the output when everything is ne. This can take

30-45 seconds.

There’s no output for a while after I switch gain.

Correct. And completely normal. Lyr’s micropro-

cessor protection system mutes the output while

it changes gain, and monitors operational points

until all is settled.

What’s with the clicking noises when I turn the

volume?

That’s the sound of the mechanical relays in the

relay-switched stepped attenuator. Also normal.

What kind of tubes can I use in Lyr+?

Use only 6SN7-type tubes, including 6N8S, 5692,

and (of course) 6SN7.

FAQ

Can I leave Lyr+ on all the time?

You can, but it would be best to do it when in

solid state mode (no tube inserted). The tube

heater is on all the time, in all modes, and

leaving it powered on all the time will

signicantly shorten the tube lifespan.

The Lyr+ clicks and I don’t hear any music,

then it clicks back on, then click and no

music, over and over again.

Aha! We bet you’re using a TRRS jack (typically

found on headphones with microphones) that

has been “converted” to 1/4” using an adapter.

This can short the outputs, forcing Lyr+ to

protect itself. If you want to use a TRRS head-

phone, we sell a proper conversion kit here:

schiit.com/trrs

It doesn’t turn on, what do I do?

Plug it in to a different AC socket. Ensure you

are not currently in a blackout. Then email us if

it still doesn’t work.

WARRANTY

Schiit Audio warrants to the original purchaser that the product shall be free from defects in material and workmanship

for ve (5) years from the date of purchase. Exceptions: tubes and remote controls. Tubes are covered by a 90-day limited

warranty with the same terms. Remote controls are covered by a 1-year warranty with the same terms. If a defect covered

by this warranty occurs during this warranty period, Schiit Audio will repair the defective product, free of charge. Date

of purchase will be based on customer-submitted receipts, otherwise date of manufacturing will be used to determine

warranty period.

If you believe you need warranty service, CONTACT US rst. There may be a simple solution to your problem. Schiit

Audio products sent back to us without a RETURN AUTHORIZATION (RA) will be returned to the sender without repair. To

WARRANTY LIMITATIONS

THIS WARRANTY SHALL NOT APPLY IF THIS PRODUCT: (a) IS MODIFIED OR TAMPERED WITH; (b) IS DAMAGED BY

NEGLIGENCE, ACCIDENT, UNREASONABLE USE, COFFEE, OR BY OTHER CAUSES UNRELATED TO DEFECTIVE

MATERIALS OR WORKMANSHIP; OR (c) HAS HAD THE SERIAL NUMBER ALTERED, DEFACED OR REMOVED.

ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY LIMITED IN DURATION TO THE WARRANTY PERIOD (5 YEARS). IN NO EVENT

SHALL SCHIIT AUDIO BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE BREACH OF

ANY IMPLIED OR EXPRESS WARRANTIES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS OR EXCLUSION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS MAY

NOT APPLY TO YOU.

This warranty gives you specic legal rights. You may also have other rights which vary from state to state or province

to province.

SCHIIT.COM

[email protected]

Application for Council Directives 72/23/EEC

Conformity declared for EN60065, EN50082-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Schiit Verstärker Handbücher

Schiit

Schiit AEGIR Bedienungsanleitung

Schiit

Schiit Jotunheim R Bedienungsanleitung

Schiit

Schiit Saga S Bedienungsanleitung

Schiit

Schiit MJOLNIR 2 Bedienungsanleitung

Schiit

Schiit SCH-21 Bedienungsanleitung

Schiit

Schiit LYR+ Bedienungsanleitung

Schiit

Schiit MAGNI 2 UBER Bedienungsanleitung

Schiit

Schiit Fulla 3 Bedienungsanleitung

Schiit

Schiit FOLKVANGR Bedienungsanleitung

Schiit

Schiit Vali 2 Bedienungsanleitung

Schiit

Schiit Magni 2 SCH-07-2 Bedienungsanleitung

Schiit

Schiit Freya Bedienungsanleitung

Schiit

Schiit ASGARD 2 Bedienungsanleitung

Schiit

Schiit LYR 2 SCH-03-2 Bedienungsanleitung

Schiit

Schiit MAGNI Bedienungsanleitung

Schiit

Schiit SCH-07 Bedienungsanleitung

Schiit

Schiit JOTUNHEIM Bedienungsanleitung

Schiit

Schiit Nexus Ragnarok 2 Bedienungsanleitung

Schiit

Schiit RAGNAROK SCH-09 Bedienungsanleitung

Schiit

Schiit Mjolnir SCH-05 Bedienungsanleitung

Schiit

Schiit ASGARD SCH-01 Bedienungsanleitung

Schiit

Schiit MAGNI Bedienungsanleitung

Schiit

Schiit SHOLL Bedienungsanleitung

Schiit

Schiit FREYA S Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung