Schmidt RM Series Bedienungsanleitung

Thickness Gauge

RM Series

Model RMU-30

RMU-50

RMU-75

RMP-30

Edition RM 01.0.E

Instruction Manual

Valid as of: 05.07.2012• Please keep the manual for future reference!

1 Preparation

Before using the thickness gauge, check the cleanliness of the measuring surface and the

measuring pin. If necessary, clean with a dry, lint-free cloth.

2 Setup

The measuring pin with the upper measuring insert is pressed onto the lower measuring

insert and held in this position or locked with the locking screw.

By pressing the key „OFF / ON“, the measuring instrument is switched on and with the key

„0“ the zero point is adjusted.

With the function key „mm / inch“ you can select the desired scaling.

3 Measuring

The thickness gauge is ergonomically designed and allows a precise and fast measuring

with one hand.

The entire measuring range is available because the movable measuring pin is constantly

guided by spring force in the upper position.

During the measuring process, the material to be measured is scanned by the measuring

inserts.

By means of a finger, the measuring pin is carefully pressed onto the test material and the

measured value is determined.

The function key „0“ allows to set the zero point at any point in the measurement

range. This allows very fast measurements to deviations from given

Tolerances etc. are performed.

The thickness gauge can be switched of by pressing the ON / OFF key.

S C H M I D T

c o n t r o l i n s t r u m e n t s

4 Notes to maintenance

The thickness gauge should be kept dry all the time. Water and other liquids should be kept

away as they endanger the electronics.

The device should not be cleaned with acetone.

Battery replacement is carried out as follows:

1. Open battery compartment in direction of the arrow, remove the lid

2. Replace the old battery, altough paying attention to the correct position of the poles.

Insert the new battery.

3. Insert the battery cover and push toward.

5 Specifications

Measuring Range 0 - 30 mm, 0 - 50 mm, 0 - 75 mm

Scaling 0.01 mm / 0.0005 inch

Display Liquid crystal, height of digits 10 mm

sign (-)

Battery 1 Stück SR 44

Jaw Aluminium alloy, high-strength

Finishing plasticized/galvan. Ni

Mailing address:

P. O. B. 1154

84464 Waldkraiburg Germany

Shipping address:

Schichtstr. 16

84478 Waldkraiburg Germany

Hans Schmidt & Co GmbH

Phone:

int. + 49 / (0)8638 / 9410-0

Fax:

int. + 49 / (0)8638 / 4825

int. + 49 / (0)8638 / 67898

More than 70 years - Worldwide -

e-mail:

[email protected]

Internet:

http://www.hans-schmidt.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Schmidt Messgerät Handbücher

Schmidt

Schmidt G4 Bedienungsanleitung

Schmidt

Schmidt ZT Series Bedienungsanleitung

Schmidt

Schmidt HTG Series Bedienungsanleitung

Schmidt

Schmidt D-2005 Series Bedienungsanleitung

Schmidt

Schmidt MKM-50 Bedienungsanleitung

Schmidt

Schmidt DHT-3 Bedienungsanleitung

Schmidt

Schmidt Z Series Bedienungsanleitung

Schmidt

Schmidt OS8000 Bedienungsanleitung

Schmidt

Schmidt SS 20.400 Bedienungsanleitung

Schmidt

Schmidt IL 30.0 Series Bedienungsanleitung

Schmidt

Schmidt DX Series Bedienungsanleitung

Schmidt

Schmidt TS Series Bedienungsanleitung

Schmidt

Schmidt KLA Bedienungsanleitung

Schmidt

Schmidt DHT-2 Bedienungsanleitung

Schmidt

Schmidt SS 20.600 E Series Bedienungsanleitung

Schmidt

Schmidt MZ-422 Series Bedienungsanleitung

Schmidt

Schmidt KXE-50 Bedienungsanleitung

Schmidt

Schmidt MD 10.010 Bedienungsanleitung

Schmidt

Schmidt DNW-100K Bedienungsanleitung

Schmidt

Schmidt FG Series Bedienungsanleitung

Schmidt

Schmidt DW-U Bedienungsanleitung

Schmidt

Schmidt OS8000 Bedienungsanleitung

Schmidt

Schmidt ETB Bedienungsanleitung

Schmidt

Schmidt SS 20.250 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung