SCHUNK AGE-F-XY 31-80 Gebrauchsanweisung

Translation of the original manual

Compensation unit

AGE-F-XY 31-80

Assembly and Operating Manual

Superior Clamping and Gripping

Imprint

2 02.02|AGE-F-XY 31-80|en

Imprint

This manual remains the copyrighted property of SCHUNK GmbH & Co. KG. It is solely

supplied to our customers and operators of our products and forms part of the product.

This documentation may not be duplicated or made accessible to third parties, in particu-

lar competitive companies,

without our prior permission.

Technical changes:

We reserve the right to make alterations for the purpose of technical improvement.

Document number: 0389002

Edition: 02.02 |23/01/2017|en

Dear customer,

congratulations on choosing a SCHUNK product. By choosing SCHUNK, you have opted for

the highest precision, top quality and best service.

You are going to increase the process reliability of your production and achieve best

machining results – to the customer's complete satisfaction.

SCHUNK products are inspiring.

Our detailed assembly and operation manual will support you.

Do you have further questions? You may contact us at any time – even after purchase.

Kindest Regards

Yours SCHUNK GmbH & Co. KG

Spann- und Greiftechnik

Bahnhofstr. 106 – 134

D-74348 Lauffen/Neckar

Tel. +49-7133-103-0

Fax +49-7133-103-2399

[email protected]

www.schunk.com

Table of Contents

02.02|AGE-F-XY 31-

80|en

Table of Contents

About this manual .................................................................................................... 4

1.1

Warnings................................................................................................................... 4

1.1.1

Key words...................................................................................................... 4

1.1.2

Symbols ......................................................................................................... 4

1.2

Applicable documents .............................................................................................. 5

Basic safety notes .................................................................................................... 6

2.1

Intended use............................................................................................................. 6

2.2

Not intended use...................................................................................................... 6

2.3

Environmental and operating conditions................................................................. 6

2.4

Product safety........................................................................................................... 7

2.4.1

Protective equipment ................................................................................... 7

2.4.2

Constructional changes................................................................................. 7

2.5

Personnel qualification............................................................................................. 7

2.6

Using personal protective equipment...................................................................... 8

2.7

Notes on particular risks........................................................................................... 9

Warranty................................................................................................................. 10

Scope of delivery ..................................................................................................... 10

Accessories.............................................................................................................. 10

5.1

Sensors.................................................................................................................... 10

Technical data ......................................................................................................... 11

Assembly and settings ............................................................................................. 12

7.1

Assembly example.................................................................................................. 12

7.2

Mechanical connection .......................................................................................... 13

7.3

Setting the stop in order to limit stroke................................................................. 14

7.4

Adjusting, removing and replacing the return spring for units built before June 2016...... 16

7.5

Removing and replacing the return spring for units built beginning in June 2016 ............. 17

7.6

Programmable magnetic switch (MMS-P) ............................................................. 18

Troubleshooting ...................................................................................................... 20

8.1

Module does not move? ........................................................................................ 20

8.2

Magnetic switch (MMS) does not work / cannot be adjusted .............................. 20

Maintenance ........................................................................................................... 21

9.1

Maintenance interval ............................................................................................. 21

9.2

Lubricants/Lubrication points (basic lubrication) ................................................. 21

9.3

Disassemble the module ........................................................................................ 22

9.4

Maintaining and assembling the module............................................................... 23

Assembly drawing ................................................................................................... 24

About this manual

4 02.02|AGE-F-XY 31-80|en

About this manual

This instruction is an integral part of the product and contains im-

portant information for a safe and proper assembly, commission-

ing, operation, maintenance and help for easier trouble shooting.

Before using the product, read and note the instructions, especial-

ly the chapter "Basic safety notes".

Warnings

The following key words and symbols are used to highlight dan-

gers.

Key words

DANGER

Dangers for persons.

Non-compliance will inevitably cause irreversible injury or death.

WARNING

Dangers for persons.

Non-compliance may cause irreversible injury or death.

CAUTION

Dangers for persons.

Non-observance may cause minor injuries.

NOTICE

Information about avoiding material damage

Symbols

Warning about a danger point

Warning about hand injuries

General mandatory sign to prevent material damage

1.1

1.1.1

1.1.2

About this manual

02.02|AGE-F-XY 31-

80|en

Applicable documents

• General terms of business *

• Catalog data sheet of the purchased product *

• Assembly and Operating manuals of the accessories *

The documents marked with an asterisk (*) can be downloaded on

our homepage www.schunk.com.

1.2

Basic safety notes

6 02.02|AGE-F-XY 31-80|en

Basic safety notes

Intended use

The product was designed for mechanical adjustment and storing

a positioning point of workpieces or objects.

The product is intended for installation in a machine/system. The

requirements of the applicable guidelines must be observed and

complied with.

The product may be used only in the context of its defined applica-

tion parameters (6, Page 11).

The product is designed for industrial use.

To use this unit as intended, it is also essential to observe the

technical data and installation and operation notes in this manual

and to comply with the maintenance intervals.

Not intended use

It is not intended use if the product is used, for example, as a

pressing tool, stamping tool, lifting gear, guide for tools, cutting

tool, clamping device or a drilling tool.

• Any utilization that exceeds or differs from the appropriate use

is regarded as misuse.

Environmental and operating conditions

• Ensure that the module and the top jaws are adequately di-

mensioned according to the application

• Ensure that the environment is clean. Observe the mainte-

nance and lubrication intervals "Maintenance intervals" (9.1,

Page 21)

• Ensure that the environment is free of splashing water and va-

pors, and also of abrasive dust and process dust. Excepted are

modules that are designed especially for contaminated en-

vironments.

2.1

2.2

2.3

Basic safety notes

02.02|AGE-F-XY 31-

80|en

Product safety

Dangers arise from the product, if:

• the product is not used in accordance with its intended purpose.

• the product is not installed or maintained properly.

• the safety and installation notes are not observed.

Avoid any manner of working that may interfere with the function

and operational safety of the product.

Wear protective equipment.

NOTE

More information is contained in the relevant chapters.

Protective equipment

Provide protective equipment per EC Machinery Directive.

Constructional changes

Making constructional changes

Attachments and modifications, constructional changes and sub-

sequent work, e.g. additional threads, drill holes and safety devic-

es may impair the operation and safety or damage the product.

• Constructional changes may only be done with SCHUNK's per-

mission.

Personnel qualification

Inadequate qualifications of the personnel

If the personnel working with the product is not sufficiently quali-

fied, the result may be serious injuries and significant property

damage.

• All work may only be performed by qualified personnel.

• Before working with the product, the personnel must have read

and understood the complete assembly and operating manual.

• Observe the national safety regulations and rules and general

safety instructions.

2.4

2.4.1

2.4.2

2.5

Basic safety notes

8 02.02|AGE-F-XY 31-80|en

The following personal qualifications are necessary for the various

activities related to the product:

Due to their technical training, knowledge and experience, trained

electricians are able to work on electrical systems, recognize and

avoid possible dangers and know the relevant standards and regu-

lations.

Pneumatics specialists have been trained for this particular area of

responsibility and know the relevant standards and regulations.

Hydraulic specialists have been trained for this particular area of

responsibility and knows the relevant standards and regulations.

Due to its technical training, knowledge and experience, qualified

personnel is able to perform the delegated tasks, recognize and

avoid possible dangers and knows the relevant standards and reg-

ulations.

Instructed persons were instructed by the operator about the del-

egated tasks and possible dangers due to improper behaviour.

Due to its technical training, knowledge and experience, service

personnel of the manufacturer is able to perform the delegated

tasks and to recognize and avoid possible dangers.

Using personal protective equipment

When using this product, observe the relevant industrial safety

regulations and use the personal protective equipment (PPE) re-

quired!

• Use protective gloves, safety shoes and safety goggles..

• Observe safe distances.

Trained electrician

Pneumatics specialist

Hydraulic specialist

Qualified personnel

Instructed person

Service personnel of

the manufacturer

2.6

Basic safety notes

02.02|AGE-F-XY 31-

80|en

Notes on particular risks

Generally valid:

• Remove the energy supplies before installation, modification,

maintenance, or adjustment work.

• Make sure that no residual energy remains in the system.

• Do not move parts by hand when the energy supply is connected.

• Do not reach into the open mechanism or the movement area

of the unit.

• Perform maintenance, modifications, and additions outside the

danger zone.

• Secure the product during all operations against uncontrolled

activation.

• Take a precautionary approach by maintenance and disassembly.

• Only specially trained staff should disassemble the product.

WARNING

Risk of injury due to unexpected movement of the ma-

chine/system!

• Switch off the energy supply.

WARNING

Risk of injury from falling objects or module falling!

• Follow the assembly instructions.

• Provide protective equipment to prevent objects or the mod-

ule from falling, such as processed workpieces, tools, chips,

fragments, rejects.

2.7

Accessories

10 02.02|AGE-F-XY 31-80|en

Warranty

If the product is used as intended, the warranty is valid for 24

months from the ex-works delivery date under the following con-

ditions:

• Intended use in 1-shift operation

• Observe the mandatory maintenance and lubrication intervals

• Observe the environmental and operating conditions

Parts touching the work piece and wear parts are not part of the

warranty.

Scope of delivery

The scope of delivery includes

• Compensation unit with spring return AGE-F-XY in the version

ordered

Accessories

A wide range of accessories are available for this product

For information about which accessories can be used with the ap-

propriate product version see catalog.

Sensors

Overview of the compatible sensors

Designation

Type

Programmable magnetic switch

MMS22

• Exact type designation of the compatible sensors see catalog.

• Informationen über die Handhabung von Sensoren unter

www.de.schunk.com oder bei den SCHUNK-Ansprechpartnern.

5.1

Inhaltsverzeichnis

Andere SCHUNK Industrieanlagen Handbücher

SCHUNK

SCHUNK EGP 25 Anleitung zur Verwendung

SCHUNK

SCHUNK HSA Series Gebrauchsanweisung

SCHUNK

SCHUNK RH 901 K Bedienungsanleitung

SCHUNK

SCHUNK HWS Series Gebrauchsanweisung

SCHUNK

SCHUNK ROTA TP Series Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSE3 138 Gebrauchsanweisung

SCHUNK

SCHUNK LEG 400 Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSE plus 138 Bedienungsanleitung

SCHUNK

SCHUNK SVH Gebrauchsanweisung

SCHUNK

SCHUNK ERT 100 Bedienungsanleitung

SCHUNK

SCHUNK KSM2 Series Bedienungsanleitung

SCHUNK

SCHUNK JGP-P 40 Gebrauchsanweisung

SCHUNK

SCHUNK GWB Series Gebrauchsanweisung

SCHUNK

SCHUNK CWS Anleitung zur Verwendung

SCHUNK

SCHUNK DPZ-plus Series Gebrauchsanweisung

SCHUNK

SCHUNK VERO-S NSP 140 Gebrauchsanweisung

SCHUNK

SCHUNK SDV-P Gebrauchsanweisung

SCHUNK

SCHUNK ROTA THW 400 Gebrauchsanweisung

SCHUNK

SCHUNK ROTA-G Series Bedienungsanleitung

SCHUNK

SCHUNK GSM-P Series Gebrauchsanweisung

SCHUNK

SCHUNK MEG 50 EC Gebrauchsanweisung

SCHUNK

SCHUNK AGE-XY Gebrauchsanweisung

SCHUNK

SCHUNK KHM 40 Gebrauchsanweisung

SCHUNK

SCHUNK SKE Series Gebrauchsanweisung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung

BAC

BAC BCP2D Bedienungsanleitung