Scosche BlueFusion BFCL2K Bedienungsanleitung

BFCL2K

HANDS-FREE BLUETOOTH®INTERFACE FOR

SELECT 2003-UP SELECT CLASS 2 GM VEHICLES

WITH XM SAT

TUNER

WITHOUT

XM SAT

BFEXTB

(EXTENSION)

APPLICATIONS HARNESS APPLICATIONS

iPhone is a trademark of Apple Inc., registered in the US and other countries.

CADILLAC

ESCALADE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

ESCALADE ESV 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

ESCALADE EXT 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

CHEVROLET

AVALANCHE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

COLORADO 2004-10 BFCL2XMB BFCL2HB NOT REQUIRED

CORVETTE 2006-08 BFCL2XMB BFCL2HB YES /XM ONLY

IMPALA/IMPALA SS 2003-05 BFCL2XMB BFCL2HB YES /XM ONLY

MONTE CARLO 2003-05 BFCL2XMB BFCL2HB YES /XM ONLY

SILVERADO CLASSIC 2007

SILVERADO NEW 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

SUBURBAN 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

TAHOE 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

TRAILBLAZER 2004-08 BFCL2XMB BFCL2HB NOT REQUIRED

UPLANDER 2005-07 BFCL2XMB BFCL2HB NOT REQUIRED

VENTURE 2003-05 BFCL2XMB BFCL2HB NOT REQUIRED

GMC

CANYON 2004-10 BFCL2XMB BFCL2HB NOT REQUIRED

ENVOY/XUV 2004-06 BFCL2XMB BFCL2HB NOT REQUIRED

SIERRA CLASSIC 2007 BFCL2XMB BFCL2HB NOT REQUIRED

SIERRA NEW 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

YUKON 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

YUKON XL 2003-06 BFCL2XMB BFCL2HB NOT REQUIRED

HUMMER

H2 2003-07 BFCL2XMB BFCL2HB NOT REQUIRED

H3 2006-07 BFCL2XMB BFCL2HB NOT REQUIRED

PONTIAC

MONTANA SV6 2005-06 BFCL2XMB BFCL2HB NOT REQUIRED

SI 02/10-BFCLK2 (3000533)

The Scosche BFCL2K BlueFusionTM Bluetooth Interface will allow you to wireless-

ly communicate with your Bluetooth enabled celular phone and Stereo Bluetooth

transmitters. The BFCL2K communicates directly with your factory radio allowing

you direct control of hands-free, voice dialing, and A2DP functionality. These in-

terfaces maintain the original integrity of important diagnostic and safety systems

within the vehicle. For up-to-date applications or any Technical asistance with this

product, call Scosche Tech support at (800) 621-3695 Ext 3.

RADIO COMPATABILITY

WORKS WITH

NAVIGATION RADIOS AND

NON-NAVIGATION RADIOS

NOTE: RADIO ILLUSTRATIONS ABOVE ARE TYPICAL. THERE ARE ADDITIONAL RADIO

MODEL/ STYLES THAT ARE COMPATIBLE WITH BLUEFUSION. YOUR CAR MAY DIFFER.

XM TUNER LOCATIONS GUIDE

TRUCKS/ SUV

(BEHIND GLOVE BOX) SEDANS

(TRUNK, VARIOUS)

CROSSOVER SUV's

(BEHIND LEFT SIDE PANEL)

PRELIMINARY: Determine whether you have an XM module in the vehicle.

Press the band button to see if the XM source displays on the screen of the

radio.

IMPORTANT CELL PHONE DISCLAIMER: READ FIRST!

• SomecellularphonemanufacturersutilizeaBluetooth microprocessor that

unfortunately is not compatible with the BlueFusion system. Some phones

from Palm, LG (Envy/Envy2), Samsung (Impression) and HTC (Omni) have

exhibited operating difficulties with the BlueFusion system. If you own these

models or other models from these manufacturers call Scosche Tech Support

for the latest updated phone incompatibility list. (800) 621-3695.

• ThisBlueFusiondevicewillpairtoONEphoneattime.

• Duetovariancesincellphonemanufacturing,CallerIDfunctionsmayvary

from what is printed in this manual.

• BlueFusiondoesnotsupportphonebookprofiles.

• Scoschedoesnotguarantee100%compatibilitywithallBluetooth

cellphones.

QUICK BUTTONS

Multi-Function Knob

TO SCROLL MENUS

Seek Forward

TO ANSWER/ SELECT

Seek Back

TO END/ PREVIOUS MENU

These are the only buttons used for the

interface.

Please read and understand this entire

manual before operating the interface.

Select

CH1

CUSTOM

STEREO

XM Preview

No Category Info

TITLE : No Title Info

: XM Preview

ARTIST

XM1

Info

Options

2:17PM

SEEK

NAV

CONFIG

NAV

RPT

BAND

SEEK

SCAN

PWR

VOL

REV

FWD

SIDE

RDM

AUDIO

PUSH

P-TYPE

TURN

AUTO

HR MIN

BAND TAPE

DISC INFO SEEK

TYPE TRAF AUTO

AUTO

VOL

DISPL

TUNE

DISPL

TUNE

SEEK

QUICK BUTTONS

Multi-Function Knob

TO SCROLL MENUS

Seek Forward

TO ANSWER/ SELECT

Seek Back

TO END/ PREVIOUS MENU

These are the only buttons used for the

interface.

Please read and understand this entire

manual before operating the interface.

Select

CH1

CUSTOM

STEREO

XM Preview

No Category Info

TITLE : No Title Info

: XM Preview

ARTIST

XM1

Info

Options

2:17

SEEK

NAV

CONFIG

NAV

RPT

BAND

SEEK

SCAN

PWR

VOL

REV

FWD

SIDE

RDM

AUDIO

PUSH

P-TYPE

TURN

AUTO

HR MIN

BAND TAPE

DISC INFO SEEK

TYPE TRAF AUTO

AUTO

VOL

DISPL

TUNE

DISPL

TUNE

SEEK

IMPORTANT NOTE: If vehicle is equipped with XM tuner box (active or not

active) the BFGMLANXMB harness must be used. The BFGMLANXMB “T”

harness must be installed at the SAT radio Tuner box location.

XM TUNER LOCATIONS: Trucks/SUVs: Behind Glove box, Crossovers: Left

rear side panel, Sedans: Trunk.

TECH TIP: Do not mount the BFCL2 module near moving or mechanical de-

vices that may damage the interface. Keep away from any hot surface areas like

heater ducts, direct sun light and metal surface areas that may get hot.

BFCL2 INTERFACE INSTALLATION

1. Locate XM tuner box in vehicle.

2. Remove harness from the XM tuner.

3. Install BlueFusion “T” harness

into the XM tuner.

4. Plug the 24 pin connector into

the BFCL2 BlueFusion interface.

IMPORTANT NOTE: When vehicle is NOT equipped with XM tuner box, the

BFCL2HB harness must be used. The BFCL2 “T” harness must be installed

behind the vehicle’s stereo.

TECH TIP: Do not mount the BFCL2 module near moving or mechanical

devices that may damage the interface. Keep away from any hot surface areas

like heater ducts, direct sun light and metal surface areas that may get hot.

NON-XM INSTALLATION:

1. Remove the factory radio.

2. Remove the 12 and 24 pin

connectors from the factory radio.

3. Use T-taps to connect the power

and ground wires.

4. Plug the factory 14 and 16 pin

connectors into (2) BFCL2HB

female harnesses.

5. Plug the (2) BFCL2HB male

harnesses into the factory radio.

6. Plug the 24 pin connector into the

BFCL2 BlueFusion interface.

VEHICLES WITH SAT TUNER

VEHICLES WITHOUT SAT TUNER

XM HARNESS

MICROPHONE

24-Pin

3-PIN

XM TUNER

BOX

CAR HARNESS

BUILT IN

FILTER BOX

NON XM HARNESS

MICROPHONE

24-Pin

3-PIN

ACTORY

RADIO

FACTORY HARNESSES

POWER

GROUND

IMPORTANT NOTE: BFEXTB extension is required on vehicles that have their

SAT Tuners located at the rear of the vehicle. BFETXB is sold separately

(Not included) (Impala, Monte Carlo).

TECH TIP: Do not route BFEXTB extension cable over sharp edges or near

moving parts.

BFEXT INSTALLATION:

1. Locate XM tuner box in vehicle.

2. Remove XM harness from XM tuner.

3. Install BFGMLANXMB T harness

between the Factory XM harness

and XM SAT Tuner.

4. Plug the 24 pin Female connector in

to the “T” harness in place of

where the BlueFusion module

would connect.

5. Route BFEXTB cable to under

driver’s seat location.

4. Plug the 24 BFEXTB Male

connector into the BFGMK

BlueFusion interface.

TECH TIP: Aim microphone towards the driver’s seat

MICROPHONE INSTALLATION:

1. Attach the microphone to the headliner above the rear view mirror.

2. Carefully route the microphone cable behind the headliner and down the

“A” (front most) pillar

Use caution when routing cable and avoid sharp edges or moving metal parts.

3. Route the cable to the BlueFusion interface location and plug it into the 3-pin

connector on the Scosche “T “harness.

VEHICLES WITH REAR SAT TUNER

XM HARNESS

MICROPHONE

3-PIN

XM TUNER

BOX

CAR HARNESS

10ft. EXTENSION

TRUNK MOUNTED

24-Pin

BLUEFUSION MICROPHONE INSTALLATION

VEHICLES

XM HARNESS

IMPORTANT NOTE: Your Bluetooth cellular phone must be paired with the

BlueFusion system before use. Once the initial pairing process has been

copleted, your phone should easily connect and disconnect to BlueFusion

during daily use.

PAIRING INSTRUCTIONS:

1. Once the hardware has been properly installed, insert the key and start the

vehicle. The BlueFusion interface needs to read the vehicle’s ignition codes to

properlyinitialize.

2. Press the “BAND” button on the radio until XM is selected as the radio

source.

3A. Vehicle’s with XM Tuner installed: Press and hold SEEK BACK/SEEK DOWN

to get to BlueFusion screen.

3B. Vehicle’s without XM Tuner installed: BlueFusion menu screen will be

displayed at this step. You do not have to use the SEEK BACK/SEEK DOWN

button to switch between XM and BlueFusion screens.

4. Once in the BlueFusion screen, you will hear a beep tone indicating that

BlueFusion is in pairing mode. (BlueFusion enters pairing mode automatically

when the Ignition is turned on and no phone is currently paired.)

5. From your phone’s Bluetooth menu, perform a search for new devices (refer

to your cell phone user manual). The phone should display “BlueFusion”

6. Select [pair to] BlueFusion and enter pin code 0000 when prompted. This will

complete the pairing process. (Once your phonies paired with BlueFusion, the

beep tones should stop and BlueFusion is now ready for use.)

ADDITIONAL PAIRING NOTES:

•Ifpairingisunsuccessful,repeatsteps1-6above.Ifyouareunabletopair,

please call Tech Support (800) 621-3695 Ext. 3

•AfteryourphonehasbeeninitiallypairedwithBlueFusion,itshouldeasily

re-connect for future use. Many phones will automatically re-connect to the

BlueFusion system as long as you keep your phones Bluetooth feature

active. If your phone does not freely connect and disconnect to BlueFusion,

consult your phones owner’s manual to check for addition options that may

require enabling.

PAIRING YOUR CELLULAR PHONE

USING THE STEERING WHEEL CONTROLS

USING THE RADIO CONTROLS

Multi-Function Knob

TO SCROLL MENUS

Seek Forward

TO ANSWER/ SELECT

Seek Back

TO END/ PREVIOUS MENU

These are the only buttons used for the

interface.

Please read and understand this entire

manual before operating the interface.

DISPL

TUNE

SEEK

SEEK VOL

SRC

PROG

All other buttons on the steering wheel controls are defaulted to send the

conversation to switch back to privacy mode (back to the cellular phone).

ANSWER - Press the track forward button once.

END/ IGNORE - Press the track back button once.

VOICE DIAL - Press the talk button twice.

AUTO-CONNECT/ DISCONNECT (ENTERING AND LEAVING THE VEHICLE)

When the vehicle is started, BlueFusion will automatically connect to the phone

which it was last paired. Some cellular phones may not freely disconnect and

re-connect without user input. If you are having difficulty with this process, there

may be additional settings required in your particular phone that will set

BlueFusion as a “trusted” device. This operation may vary between phone

brands and models.

If you are already on an active call and you enter and start the vehicle,

BlueFusion will automatically switch the call to hands-free mode.

If you are on an active call and the vehicle is turned off, BlueFusion will

automatically transfer the call to the handset.

VOICE DIALING:

NOTE: This feature activates your cell phone’s voice dial function. The cell

phone used must be voice dial compatible.

TO ACTIVATE VOICE DIAL ON THE RADIO:

Scroll to Voice dial in BlueFusion main menu and press seek forward once.

TO ACTIVATE VOICE DIAL FROM THE STEERING WHEEL:

Press the mute button twice. (See page 6 for steering wheel control layout)

HANDS-FREE OPERATION

Your BlueFusion system functions as an XM source through your Factory

Stereo. In order to access BlueFusion, the XM band must be selected

(See diagram).

If listening to a source other than XM, BlueFusion will automatically switch to the

XM band when there is an incoming call. (See note) When the call is ended your

radio may not switch back to the previous source unless the previous source

was XM.

NOTE: Vehicles equipped with Y91 Premium BOSE systems (such as Cadillac

Escalade, Hummer H2, Sierra Denali) will automatically switch back to which-

ever source was previously selected.

SWITCHING BETWEEN SOURCES

FM CD DVD/

NAV

XM Sat

BlueFusion

AUX

HANDS-FREE OPERATION

INCOMING CALLS:

When receiving an incoming call the Factory radio will automatically switch to

the BlueFusion source and display caller number. The BlueFusion system is

designed to display caller ID only. (Some phones may provide additional

message string information and provide a name in place of the calling number.

Your results may vary). BlueFusion does not support Phonebook profile.

TO ANSWER A CALL:

Press Seek Forward on the steering wheel controls.

Press Seek Forward from the radio controls.

INCOMING CALLS (BLOCKED NUMBER):

When receiving an incoming call the Factory radio will automatically switch to

the BlueFusion source, however a number WILL NOT display on the screen.

Answer the call using the same buttons as Incoming calls above.

OUTGOING CALLS (FROM HANDSET):

When making an outgoing call directly from the phone, the factory radio will

automatically switch to the BlueFusion source and send hands-free audio

through the factory speakers.

TO MAKE AN OUTGOING CALL FROM CALL LOG:

Enter incoming, outgoing, or missed call menus from BlueFusion main menu,

scroll to selected number and press Seek Forward to initiate a call to the chosen

number

ENDING A CALL:

Press Seek Back on the radio

Press Seek Back on Steering Wheel Control.

IGNORING AN INCOMING CALL:

Press and hold Seek Back from the Steering Wheel Control.

Press Seek Back from the radio.

REDIAL LAST NUMBER:

Scroll to redial in BlueFusion main menu and press Seek Forward to initiate a call

to the last dialed number.

TRANSFER TO HANDSET:

To transfer a call to privacy mode you can:

Change the audio source of the radio or power off the radio ONCE THE CALL

HAS BEEN ACCEPTED.

HANDS FREE VOLUME ADJUSTMENT:

If you find the hands-free volume level to Low or High when switching between

other sources, follow this step: When idle (standby), scroll to “Settings” from the

BlueFusion menu and press Seek Forward. This will now allow access to hands

free volume. Use the radio or steering wheel volume controls to adjust volume

level as needed. The setting will only apply to hands free mode.

HANDS-FREE OPERATION

SECONDARY AND CONFERENCE CALL HANDLING

When receiving a second call while in an active call the BlueFusion display a

new menu with a list of second call handling functions.

TO ANSWER THE SECOND CALL AND PLACE ACTIVE CALL ON HOLD:

Press Seek forward on radio.

Press Seek forward on Steering Wheel Control.

SWAP CALLS:

(This option is only present during TWO active phone calls)

Scroll to “Swap Calls” in BlueFusion’s second call menu and press seek forward

once.

RELEASE HELD CALL:

Scroll to “Release held call” in BlueFusion’s second call menu and press seek

forward once.

CONFERENCE 2 CALLS:

Scroll to “Conference” in BlueFusion’s second call menu and press seek forward

once.

END CURRENT CALL AND ANSWER SECOND CALL:

Scroll to “End and Receive” in BlueFusion’s second call menu and momentarily

press seek forward once.

TO END SECOND CALL:

Press seek back once on the radio controls.

Press seek forward once on the steering wheel controls.

(Depending on your phone, when the second call is ended the held call will ei-

ther automatically reconnect or it will ring back as a new call.) for steering wheel

control layout)

Note: This flow chart is for visual purposes only. It is NOT a representation of a BlueFusion

video screen or graphics.

Incoming

Calls

Redial

Seek fwd

to list

numbers

Scroll

*Voice dailing feature with voice dial enabled cell phones only. Consult your phone’s user guide.

to determine if your phone is capable. Some phones may require additional setup within the phone

before using this feature.

Seek fwd

to list

numbers

Seek fwd

to list

numbers

Select

number to

call

Seek fwd

dials

number

Outgoing

Calls

Select

number to

call

Seek fwd

dials

number

Missed

Calls

Select

number to

call

Seek fwd

dials

number

Seek fwd

redials last

number

Scroll

*Voice

Dial

Seek fwd

to activate

Scroll

BLUEFUSION MENU MAP

Note: This flow chart is for visual purposes only. It is NOT a representation of a BlueFusion

video screen or graphics.

Incoming

Calls

Redial

Seek fwd

to list

numbers

Scroll

*Voice dailing feature with voice dial enabled cell phones only. Consult your phone’s user guide.

to determine if your phone is capable. Some phones may require additional setup within the phone

before using this feature.

Seek fwd

to list

numbers

Seek fwd

to list

numbers

Select

number to

call

Seek fwd

dials

number

Outgoing

Calls

Select

number to

call

Seek fwd

dials

number

Missed

Calls

Select

number to

call

Seek fwd

dials

number

Seek fwd

redials last

number

Scroll

*Voice

Dial

Seek fwd

to activate

Scroll

A2DP/AVRCP STREAMING AUDIO

A2DP STREAMING AUDIO/ AVRCP REMOTE CONTROLS

Important Cell Phone Disclaimer: READ FIRST!

BlueFusion will support audio streaming while it is paired with a cell phone

(whether this is within the same device supporting multiple profiles or two

separate device).

-While streaming A2DP, redial and voice dial functions are DISABLED.

-Volume output through A2DP will vary from device to device, some products

may have distortion at full volume and level control adjustment may be neces-

sary to match the volume between other sources. This may occur during use

with an iPhone 3GS. See A2DP Volume Adjustment section below.

PAIRING A2DP FROM YOUR PHONE:

Most phones capable of streaming audio through the A2DP profile will automati-

cally pair this profile when pairing with the hands free profile. If this is does not

occur, then refer to your phones user manual for A2DP pairing instructions.

PAIRING A2DP FROM A SEPERATE DEVICE:

To pair a separate device, such as the Scosche TZ4 or other Bluetooth Audio

transmitting device, there must first be a phone paired to the BlueFusion’s

Hands Free profile. Ensure that the phone is paired only to hands-free profile

and not A2DP, refer to your phones manual for selective pairing functions. Once

the phone is paired only to the hands-free profile you may activate the pairing

process from your second device. Music will start playing once the device has

paired.

A2DP AUDIO VOLUME ADJUSTMENT:

If you find the A2DP audio stream level to low or High compared to other sourc-

es, follow this step: During A2DP audio streaming, scroll to “Settings” from the

BlueFusion menu and press Seek Forward. This will now allow access to A2DP

volume. Use the radio or steering wheel volume controls to adjust A2DP level

as needed. The setting will only apply to A2DP streaming.

AVRCP CONTROLS

To Select Next Track:

Press the seek forward button once.

Press the seek forward button once on the

steering wheel control.

To select Previous Track:

Press seek back once on the radio.

Press seek back once on the steering

wheel control.

SEEK VOL

SRC

PROG

PAUSE/PLAY - Press the talk button once.

Inhaltsverzeichnis

Andere Scosche Autozubehör Handbücher

Scosche

Scosche DO2110 Bedienungsanleitung

Scosche

Scosche GMQ02 Bedienungsanleitung

Scosche

Scosche DO2110 Bedienungsanleitung

Scosche

Scosche ITCFDOSAB Bedienungsanleitung

Scosche

Scosche HY1600 Service-Handbuch

Scosche

Scosche TA2121B Bedienungsanleitung

Scosche

Scosche MAGICMOUNT CHARGE Bedienungsanleitung

Scosche

Scosche FD2080 Bedienungsanleitung

Scosche

Scosche VQ2M Bedienungsanleitung

Scosche

Scosche MMWSM-XCES0 Bedienungsanleitung

Scosche

Scosche TAQ04 Bedienungsanleitung

Scosche

Scosche StuckUp Bedienungsanleitung

Scosche

Scosche BTFREQ BTFMPD2 Bedienungsanleitung

Scosche

Scosche SC-3300 Bedienungsanleitung

Scosche

Scosche MA2030 Bedienungsanleitung

Scosche

Scosche StuckUP IHW10 Bedienungsanleitung

Scosche

Scosche HA1563B Bedienungsanleitung

Scosche

Scosche MOTORMOUTH III BTAXS2R Bedienungsanleitung

Scosche

Scosche e2 E2PM Bedienungsanleitung

Scosche

Scosche ITCGM01AB Bedienungsanleitung

Scosche

Scosche TA1467 Bedienungsanleitung

Scosche

Scosche TerraClamp MAGICMOUNT Pro Handlebar PSM11011 Bedienungsanleitung

Scosche

Scosche 142HUD2 Bedienungsanleitung

Scosche

Scosche HAQ03 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung