Sealey SCR90 Bedienungsanleitung

MECHANIC’S DETAILING UTILITY SEAT

MODEL NO: SCR90

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this seat.

9Locate seat in a suitable working area.

WARNING! Use seat on level and solid ground, preferably concrete.

9Keep the seat clean and tidy in accordance with good workshop practice.

8DO NOT use the seat for any purpose other than that for which it is designed.

8DO NOT stand on the seat.

8DO NOT use the seat outdoors.

8DO NOT get the seat wet or use in damp or wet locations or areas where there is condensation.

8DO NOT clean the seat with any solvents which may damage the paint surface or the protective coating on the padded seat base.

8DO NOT use if damaged.

2. INTRODUCTION

Extra thick cushioned padding for added comfort when seated. Suitable for use in Bodyshop and Detailing environments as well as general

garage use. Easy-rolling Ø100mm rubber castors with ball-bearing swivel. Cup/bottle holders and storage trays for tools and components.

3. SPECIFICATION

Model No....................................................................SCR90

Overall Size (W x D x H).........................680 x 460 x 410mm

4. CONTENTS

1 Seat

2 Frame

3,4,6,7 Trays

5 Nuts

8 Wheels

5. ASSEMBLY

5.1. Place castors through frame (2) and secure with nut

and washer (5).

5.2. Fit tray (7) into base of frame (2).

5.3. Fit trays (3 & 4).

5.4. Slide tray (6) under seat.

6. MAINTENANCE

6.1. Before each use, inspect the overall condition of the

unit for broken, cracked or bent parts that may

 a󰀨ecttheproperoperation.

6.2. Regularly check the tightness of all fixings before use.

6.3. Smear the castor bearings with a thin film of silicone

grease quartlerly.

6.4. Ensure the castor wheels are able to rotate and swivel freely. Replace if necessary.

6.5. Clean the seat cushion, trays and frames with a moist cloth and mild detergent. DO NOT use solvents to clean the unit.

Refer to

instructions

SCR90 Issue 1 19/04/22

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

SCR90 Issue 1 19/04/22

Original Language Version

Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500

Inhaltsverzeichnis

Andere Sealey Werkzeugaufbewahrung Handbücher

Sealey

Sealey AP26059TO Bedienungsanleitung

Sealey

Sealey AP2405 Bedienungsanleitung

Sealey

Sealey APMS20 Bedienungsanleitung

Sealey

Sealey AP2200BB.V2 Bedienungsanleitung

Sealey

Sealey AP6310 Bedienungsanleitung

Sealey

Sealey AP2200BB Series Bedienungsanleitung

Sealey

Sealey P0618.V2 Bedienungsanleitung

Sealey

Sealey CX102 Bedienungsanleitung

Sealey

Sealey AP22DFC Bedienungsanleitung

Sealey

Sealey APLHT Bedienungsanleitung

Sealey

Sealey API16 Bedienungsanleitung

Sealey

Sealey PTB104008 Bedienungsanleitung

Sealey

Sealey AP2513B.V4 Bedienungsanleitung

Sealey

Sealey AP3508TB Bedienungsanleitung

Sealey

Sealey AP28104BWS Bedienungsanleitung

Sealey

Sealey CX1042D Bedienungsanleitung

Sealey

Sealey AP0615 Bedienungsanleitung

Sealey

Sealey AP6310BE Bedienungsanleitung

Sealey

Sealey AP26059TW Bedienungsanleitung

Sealey

Sealey AP2200BB.V2 Bedienungsanleitung

Sealey

Sealey AP2030 Bedienungsanleitung

Sealey

Sealey PTB104008SS Bedienungsanleitung

Sealey

Sealey AP6601.V2 Bedienungsanleitung

Sealey

Sealey APMS13 Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

General International

General International Excalibur 40-100 Stücklistenhandbuch