Security Command 670 Bedienungsanleitung

1234

5678

COMMAND

A B C DEF GHI JKL

VWX

STUPQRMNO

POWER

User's Guide

This equipment complies with part 68 of the FCC rules. On

thetopofthisequipmentisalabelthatcontains,amongother

information,theFCCRegistrationNumberandRingerEquiva-

lence Number (REN) for this equipment. You must, upon

request, provide this information to your telephone com-

pany.,

The REN is useful to determine the quantity of devices you

mayconnecttoyourtelephonelineandstillhaveallofthose

devicesringwhenyourtelephonenumberiscalled. Inmost,

but not all areas, the sum of the REN's of all devices

connected to one line should not exceed five (5.0). To be

certain of the number of devices you may connect to your

line,asdeterminedbytheREN,youshouldcontactyourlocal

telephonecompanytodeterminethemaximumRENforyour

calling area.

If your telephone equipment caused harm to the telephone

network, the Telephone Company may discontinue your

service temporarily. If possible, they will notify you in

advance, but if advance notice is not practical, you will

notified as soon as possible. You will be informed of your

right to file a complaint with the FCC.

FCC Information Supplied to Users

Your telephone company may make changes in its facili-

ties,equipment,operations,orproceduresthatcouldaffect

theproperfunctioningofyourequipment. Iftheydo,youwill

benotifiedinadvancetogiveyouanopportunitytomaintain

uninterrupted telephone service.

If you experience trouble with this telephone equipment,

please contact Digital Monitoring Products, Incorporated,

2841 E. Industrial Drive, Springfield, MO 65802, for infor-

mation on obtaining service or repairs. The telephone

companymayaskthatyoudisconnectthisequipmentfrom

the network until the problem has been corrected or until

you are sure that the equipment is not malfunctioning.

This equipment may not be used on coin service provided

by the telephone company. Connection to party lines is

subject to state tariffs.

The device is equipped with an USOC RJ31X connector.

Menu Options

Alarm Silence................................................. 13

Fire Reset ...................................................... 14

Door Access .................................................. 15

Armed Areas .................................................. 16

Loop Status.................................................... 17

Bypass Loops ................................................ 18

Loop Monitor .................................................. 19

System Status ................................................ 20

System Test ................................................... 21

User Codes .................................................... 22

Schedules ...................................................... 26

Time............................................................... 28

Remote Authorize .......................................... 29

DisplayEvents ............................................... 30

Special SECURITY COMMAND messages .......... 2

Special SECURITY COMMAND tones .................. 2

Special SECURITY COMMAND keys ................... 3

Terms ..................................................................... 4

Status ..................................................................... 5

Closing Check/Extend ............................................ 6

System Arming and Disarming For Area System.... 7

Area System Arming ........................................ 8

Area System Disarming ................................... 9

System Arming and Disarming For All/Permieter.. 10

All/Perimeter Arming ...................................... 11

All/Perimeter Disarming ................................. 12

TABLE OF CONTENTS

Model 670, 770, 771 Security Command

User's Guide

For use with DMP Series 1512 Controls

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.

Special SECURITY COMMAND Messages

ENTER CODE:- Thismessage willbe displayed when the SECURITYSECURITY

SECURITYSECURITY

SECURITY

COMMANDCOMMAND

COMMANDisrequestingacodenumber. Codenumbersareneededforarming,

disarming, and many of the various system options. When you press the

SECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDkeystoenteryourcodenumberthenumbersyouenterwill

notbe displayed. Instead a *will be displayed for each digit. Thisis to keep other

peoplefromseeingyourcodenumberwhenyouenterit. AlwayspressCOMMAND

after you complete the entry of your code number.

TRY AGAIN This message is displayed when a code number is

entered the first time which does not exist in the alarm system memory.

INVALID CODE This message is displayed when a code number is

entered a second time which does not exist in the alarm system memory.

INVALID LEVEL Thismessagemaybedisplayedwhen trying to access

one of the Menu Options. When a code number is entered which is in the alarm

systemmemory,butisnotahighenoughleveltoaccessaparticularMenuOption,

this message will be displayed.

INVALID TIME This message is displayed when a level 1 or 2 code

numberisenteredoutsidepermanentortemporaryschedules. Level1or2codes

will function only during a permanent or temporary schedule.

This message is displayed when there is an electronic

failureinyouralarmsystem. Youshouldcontactyouralarmdealerifthismessage

is ever displayed.

Special SECURITY COMMAND Tones

Keystroketone:Keystroketone:

Keystroketone: Shortbeep. Thisshortbeepisemittedeachtimeakeyispressed

on the SECURITY COMMAND.

Prewarntone:Prewarntone:

Prewarntone: Pulsedtone,onesecondon,onesecondoff,continuous.Thistone

isemittedafteranentrydelaydoorisopenedtoremindyoutodisarmyourburglary

system.

Monitor tone:Monitor tone:

Monitor tone: Pulsed tone, onesecond on thenoff, onepulse only. Thistone is

emitted when using the loop monitor option. The tone will be emitted every time

the loop is displayed in the alert condition.

Troubletone:Troubletone:

Troubletone: Steadytone,alwayson.WhenusingtheStatusDisplayoptionthis

tonewillbeemittedforanyfireorsystemtroubleuntilthetoneisacknowledgedby

pressing any top row select key on the SECURITY COMMAND.

SERVICE REQUIRED

TheCOMMANDkeyisusedtospeedupsystemoperation.Itcanbepressedtogo

“forward” one step during various operations of your alarm system. It can go

forwardthroughthelistofMenuOptionsorthrougheachstepofaparticularMenu

Option. The COMMAND key is excellent for quickly stepping through a list of

informationsuchasthenamesofthearmedloopsintheLoopStatusMenuOption.

TheCOMMANDkeyisalsousedwhenenteringinformation,suchascodenumbers

oraloopnumber. Thinkofitasacarriagereturnonatypewriterandpressitwhen

youhaveenteredinformationonthekeypadandyouarereadyfortheSECURITY

COMMANDto take it. Theinformation requested bythe SECURITYCOMMAND

must be entered first. The COMMAND key will not skip past a step that requires

you to make an entry.

The back arrow is used for “backing up” when operating your system. It can be

pressedtoback upthroughthe list ofMenu Options orwhen entering information

such as a code number. If an error is made while entering information press the

back arrow and the character will be erased.

ThebackarrowwillalsobackupastepintheoperationofanyMenuOption.Ifthe

back arrow is pressed at the first step in a Menu Option the option will terminate.

This is a quick way to exit a Menu Option when you are finished with it. The back

arrow will not back up through a list of information within a Menu Option, such as

Alarmed Loops or System Status.

Special SECURITY COMMAND Keys

Select keys

ABC DEF GHI JKL

MNO PQR STU VWX

YZ COMMAND

COMMAND

Back Arrowkey Command key

Thetoprowofkeysarecalledtheselectkeys. Eachtimeaselectkeyistobeused

its function will be labeled by the display above it. By labeling each key with the

displaytheycanbeusedformanydifferentapplicationssuchasenteringAMorPM

whensettingtimeorselectingwhich areas of yoursystemyouwanttoarmduring

systemarming. The mostcommon use is selecting a Menu Option. Thisis done

by pressing any one of the select keys when the name of the Menu Option is

displayed.

▲

TERMS

Areas:

A group of loops assigned together for arming and disarming. Each loop in your

burglary system must be assigned to an area. These loops are then armed and

disarmedby area. Example:Thebasementareamaybemadeupofthebasement

doorloop,thebasementwindowloopandthebasementmotiondetectorloop. By

armingthebasementarea all three loops wouldbearmed. 24hourloopsarenot

assigned to an area since they are always armed.

Transmit:

Reporting alarms, troubles, system disarming, etc. to a central station receiver.

Yoursystemcanbeprogrammedtoreportalarms,troubles,oranycombinationof

themanysystemreportstoacentralstationreceiver.Youshouldconsultyouralarm

dealerforinformationaboutwhichreportswillbetransmitted.Whenacombination

burglary and fire alarm system is installed all fire transmissions will have priority

over burglary transmissions.

Loop:

Loop describes the wiring run from your alarm control cabinet to each protection

point in your alarm. Therefore each door, window, motion detector, smoke

detector, etc. which has been individually wired to the alarm control cabinet via a

“loop”ofwireisreferredtoasaloop. Sinceeveryloopcanhaveanameandnumber

the SECURITY COMMAND can use these to identify a protection point for you.

Like, loop: 3 Front Door or loop: 12 Smoke Detector.

Entry/ Exit loop:

Aloopwhichhasanentryandexitdelaytimeassigned. Eachtimetheloopisarmed

itwill ignore anytrips until the exit delay expires. When the systemis armed and

the loop is tripped an alarm signal will not be transmitted if the loop is disarmed

before the delay expires. This allows you to enter the alarm system through the

entry door so you can disarm the system at the SECURITY COMMANDSECURITY COMMAND

SECURITY COMMANDSECURITY COMMAND

SECURITY COMMAND keypad.

Instant Loop:

A loop which has no entry/exit delay. If this loop is tripped when armed an alarm

will be transmitted.

24 Hour Loop:

A loop which is always armed. It is not controlled by arming and disarming.

Example: Fire loop, panic loop, etc.

Status is a system feature which automatically displays the armed or disarmed

statusofyourburglarysystem,aswellasanyalarmortroubleconditionsofaloop

or internal system monitor. You can choose to have all of the available status

informationdisplayed,onlyselecteditems,ornostatusdisplayatall. Youcanalso

choosewhichSECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDswilldisplaytheStatusList. Theseoptions

areprogrammedduringsysteminstallation. Allofthe availablestatusinformation

is described in this section.

StatusworksautomaticallywhentheSECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDisnotperformingany

otherfunction. Thiscouldberightaftersystemarmingordisarmingiscompleteor

justafteryou have finished using a menu option. TheSECURITYCOMMANDSECURITY COMMAND

SECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMAND

will stay in Status until you choose to go to system arming/disarming or a menu

option.

Armed Status:

Armed Status will display the current armed condition of your burglary system in

one of two ways. If this is an area arming system, the area number is displayed

if the area is armed.

Examples: Both areas are armed = 1 2

Area 2 is armed = 2

Ifthis is an all/perimeter systemand theinterior orperimeter is armed the display

will read ON .

ArmedStatuswilldisplayatallSECURITYCOMMANDSinthesystem.Ifnoareas

are armed the display will be blank.

STATUS

Status List:

Status List will display any alarm or trouble condition on a loop, and any trouble

condition on any internal system monitor. The system monitors are AC power,

batterypower,panelboxtamperandphonelinemonitor. Ifmorethanonealarm

ortroubleconditionisdisplayedtheSECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDSECURITYCOMMAND

SECURITYCOMMANDwillcontinuetoscroll

through the list.

CLOSING CHECK/EXTEND

Opening and Closing SchedulesOpening and Closing Schedules

Opening and Closing Schedules may be utilized to check to see if the burglary

systemisarmedbyascheduledtimeeachday.Theclosingcheckfeaturewillverify

thatallareasofthesystemarearmedwhenthepermanentandtemporaryschedule

expires. If an area is not armed the keypad will display CLOSING TIME.* The

steady trouble tone will also sound. If the system is not armed or a schedule

extended within ten minutes, a no closing report will be transmitted to the central

station receiver.

Theclosingschedulecanbelengthenedbyenteringatemporaryscheduleorusing

theextendfeature.Theextendfunctionstepbystepfollows.Temporaryschedules

are described in the schedule menu option section.

Ifanareahasbeendisarmedoutsideofanypermanentortemporaryschedule,the

closing check sequence will occur one hour after the area was disarmed.

Extending A ScheduleExtending A Schedule

Extending A Schedule is accomplished by pressing a top row key to silence the

closingtimedisplay.Afteravalidcodenumberisacceptedthekeypadwillrequest

thenew closingtime.Anytimemaybeenteredupto11:59p.m.Ifnotimeisentered

the closing time will be extended for one hour.

Step by Step:Step by Step:

Step by Step:

1. When a schedule expires CLOSING TIME!CLOSING TIME!

CLOSING TIME!CLOSING TIME!

CLOSING TIME! *will be displayed and

the steady trouble tone will sound.

2. Press any top row key to silence the tone. The display will read

ENTER CODE:-ENTER CODE:-

ENTER CODE:- .

3. Enter at least a level six code number and press

. The display will read

- : AM PM- : AM PM

- : AM PM .

AM PM

4. Enter the new closing time and press the or

key.

5. If no time is entered in step 4, the schedule will be extended for one hour

* Ifthe system has been programmedto provideindependent schedulesper

area, the closing time will be replaced by AREA NAME-LATEAREA NAME-LATE

AREA NAME-LATEAREA NAME-LATE

AREA NAME-LATE .

COMMAND

Area Assignment:Area Assignment:

Area Assignment: The Area Arming system can contain one or two individual

areas.Yourburglaryalarmsystemhasbeendividedinto___separateareas.The

specific area names should be listed below for easy reference.

Area Name

_______-_______________________

ArmingorDisarming:ArmingorDisarming:

ArmingorDisarming: Thefirstchoicetobemadeisifyouwishtoarmordisarm.

Arming or disarming may be done for all areas at one time or each area may be

controlled individually. If a code number is required you will only be allowed to

control the areas which are assigned to your code number.

Arming:Arming:

Arming: When arming is selected a code number may be required. This is

optional.Theoptionisprogrammedduringsysteminstallation.Ifacodenumberis

required you will only be able to arm the areas which are assigned to your code

number. If no code number is required you will be able to arm all areas.

All Or Selective Arming:All Or Selective Arming:

All Or Selective Arming: After entering your code number you will be asked if

youwishtoarmalloftheareastowhich you have access or onlyaselectedarea.

Ifyou choose to arm all areas thesystem willbegin checking to see that all loops

are in a good condition. If you choose to arm a selective area the SECURITYSECURITY

SECURITYSECURITY

SECURITY

COMMANDCOMMAND

COMMAND will allow you to choose the individual area you want to arm before

beginning the loop check.

Bypassing:Bypassing:

Bypassing: After you have made your arming selection the SECURITYSECURITY

SECURITYSECURITY

SECURITY

COMMANDCOMMAND

COMMAND willdisplayanyloopswhichhavebeenbypassedpriortoarming. This

is for your information only and they may not be reset during arming. They will

remain bypassed until disarmed or reset. Any 24 hour loops which are in a bad

condition will also be displayed. The system will then check to see that all doors

and windows which will be armed are closed and that any motion detectors, etc.,

are set properly.

SYSTEM ARMING AND DISARMING FOR AN AREA SYSTEM

Ifnoproblemsexisttheareasyouhaveselectedwillbearmed. Ifaproblemdoes

exist on one or more loops the SECURITY COMMANDSECURITY COMMAND

SECURITY COMMANDSECURITY COMMAND

SECURITY COMMAND will display the problems

andallow you to bypass those loops. If the problems can be corrected by simply

closingadoororwindowyoushouldnotbypass. Youshouldcorrecttheproblems

and repeat the arming procedure. If the loop or loops are in some way damaged

andcannotbecorrectedtheymaybebypassed. Bypassingaloopmeansitwillbe

ignoredwhilethesystemisarmed. Acodenumbermayberequiredtobypass. This

is optional and is programmed during system installation.

ArmedMessage:ArmedMessage:

ArmedMessage: Afterallloopsarebypassedorcorrectedtheareasyouselected

will be armed. The SECURITY COMMANDSECURITY COMMAND

SECURITY COMMANDSECURITY COMMAND

SECURITY COMMAND will display “ALL SYSTEM ON” if all

areas are armed. The display will read “SYSTEM ON” if all areas are not armed.

Thedisplaywillthenshowyoutheexitdelay. Anyexitloopswillnotbearmeduntil

the delay expires.

One Moment Message:One Moment Message:

One Moment Message: Your system may be programmed to wait for the

transmission of the arming signal to the central station receiver before displaying

theArmedMessage. Thisis to insurethatyourphone lines areworkingproperly.

While the system is waiting for the transmission the display will read “ONE

MOMENT...”. If the test is okay the Armed Message will be displayed. If the test

fails the display will read “LOCAL ALARM ONLY” before displaying the Armed

Message. If this is a multiplex communicating system and the closing report can

onlybeaccomplishedviaadigitalbackup,the display will read"DIGITALALARM

ONLY". This communication test is optional and is programmed during system

installation.

Arming Report:Arming Report:

Arming Report: A report of the system arming or loops which were bypassed

can be transmitted to your central station. This is optional and is programmed

during system installation.

Step By Step:Step By Step:

Step By Step:

1. Pressthe keyuntil ARM DISARMARM DISARM

ARM DISARMARM DISARM

ARM DISARM isdisplayed.

ARM

2. Press to arm areas.

3. Enter your code number if required. The display will read

ALL NO YESALL NO YES

ALL NO YES

4. Press to arm selective areas. Go to step 5.

YES

Press toarmallareastowhichyouhaveaccess. Gotostep6.

5. If NO is selected in step 4 the display will list each area to which you have

access, followed by NO and YES. Example: OFFICE NO YESOFFICE NO YES

OFFICE NO YESOFFICE NO YES

OFFICE NO YES

YES

5a. Press for every area you wish to arm.

5b. Press for every area you do not wish to arm.

6. Loops which have been bypassed prior to arming and bad 24 hour loops will

be displayed. No action is required by you.

7. Bypass any bad loops if required (step 7a, 7b, 7c)

7a. Ifaproblemexistsononeormoreloops, theloopnameandproblemwill

be displayed followed by BYPASS? NO YESBYPASS? NO YES

BYPASS? NO YESBYPASS? NO YES

BYPASS? NO YES

7b. Select to stop the arming sequence without bypassing

any loops. Correct the problem and return to step 1.

YES

Select to bypass all loops displayed as bad.

7c. Enter your code number if required to bypass loops.

8. The display will read SYSTEM ONSYSTEM ON

SYSTEM ONSYSTEM ON

SYSTEM ON

system is armed, and ALL SYSTEM ONALL SYSTEM ON

ALL SYSTEM ONALL SYSTEM ON

ALL SYSTEM ON if all areas in the system are

armed.

9. The exit time will be displayed in seconds and begin counting down,

EXIT : XXEXIT : XX

EXIT : XX . When the delay expires the exit loops will be armed.

if at least one area in the

AREA SYSTEM ARMING

COMMAND

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Security Command Messgerät Handbücher

Security Command

Security Command 1912XR Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung