Sega AFTER BURNER CLIMAX Bedienungsanleitung

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

OWNER'S MANUALAFTER BURNER CLIMAX 420-6955-02

Nissay Aroma Building, 5-37-1, Kamata, Ohta-ku, Tokyo 144-8721, Japan

Phone: +81-3-5480-6582 Facsimile: +81-3-5480-6584

Produced under license from Boeing Management Company. Boeing, McDonnell Douglas, McDonnell, Douglas, North American Aviation, their distinctive

airplane liveries, logos and product markings are among the trademarks owned by Boeing.

Produced under a license from Northrop Grumman Systems Corporation. F-14D Super Tomcat, F-5E Tiger II, A-10A Thunderbolt II, B-2A Spirit, and CVN-65

Enterprise are trademarks of Northrop Grumman Systems Corp. and are used under a license to Sega Corporation.

420-6955-02

1ST PRINTING

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and sufficiently understanding the warning

displays and cautions, handle the product appropriately. Be sure to keep this manual close to the

product or in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.

Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the

product by disregarding this

pictograph will cause severe

injury or death.

Indicates that mishandling the

product by disregarding this

warning will cause a potentially

hazardous situation which can

result in death or serious injury.

Indicates that mishandling the

product by disregarding this

caution will cause a slight

hazardous situation which can

result in personal injury and/or

material damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and

equipment, this display is attached to places where the Owner's Manual, Serviceman

Manual and/or Service Manual should be referred to.

Indicates a "Protective Earth Terminal." Before operating the equipment, be sure to

connect it to the Ground.

(The step may be omitted for products in which a power cord with earth is used.)

❍Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work.

❍Be sure to turn off the power before working on the machine.

To prevent an electric shock, be sure to turn off the power before carrying out any work that

requires direct contact with the interior of the product. If the work is to be performed in the

power-on status, the Instruction Manual herein always states to that effect.

❍Be sure to ground the Earth Terminal.

(This is not required in the case where a power cord with earth is used.)

This product is equipped with the Earth Terminal. When installing the product, connect the

Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.

Unless the product is grounded appropriately, the user can be subject to an electric shock.

After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly

connected to the control equipment.

❍Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is

not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

❍Be sure to use fuses which meet the specified rating.

(Only for the machines which use fuses.)

Using fuses exceeding the specified rating can cause a fire and an electric shock.

❍Specification changes (removal of equipment, conversion and addition) not

designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc.

It is very hazardous to operate the product by removing parts and/or modifying the circuits.

Should doors, lids and protective parts be damaged or lost, refrain from operating the product,

and contact where the product was purchased from or the office herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third

party, resulting from the specifications not designated by SEGA.

❍Ensure that the product meets the requirements of appropriate Electrical

Specifications.

Before installing the product, check for Electrical Specifications. SEGA products have a

nameplate on which Electrical Specifications are described. Ensure that the product is

compatible with the power supply voltage and frequency requirements of the location. Using

any Electrical Specifications different from the designated Specifications can cause a fire and

an electric shock.

❍Install and operate the product in places where appropriate lighting is

available, allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where

the product is operated has sufficient lighting allowing the warnings to be read. If any label is

peeled off, apply it again immediately. Please place an order with where the product was

purchased from or the office herein stated.

❍When handling the monitor, be very careful.

(Applies only to the product with a monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after turning off the

power, some portions are still subject to high tension voltage sometimes. Monitor repair and

replacement should be performed only by those technical personnel who have knowledge of

electricity and technical expertise.

❍Be sure to adjust the monitor/projector properly.

(Applies only to the product with a monitor/projector.)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product

with the monitor/projector not properly adjusted may cause dizziness or a headache to an

operator, a player, or the customers.

❍When transporting or reselling this product, be sure to attach this manual to

the product.

In the case where commercially available monitors and printers are used in this product, only

the contents relating to this product are explained herein. Some commercially available

equipment has functions and reactions not stated in this manual. Read this manual together

with the specific Instruction Manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.

* The contents described herein are fully prepared with due care. However, should any

question arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status.

❐Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

❐Are Casters and Adjusters damaged?

❐Do the power supply voltage and frequency requirements meet with those of the location?

❐Are all wiring connectors correctly and securely connected? Unless connected in the correct

way, connector connections can not be made accurately. Do not insert connectors forcibly.

❐Do power cords have cuts and dents?

❐Do the fuses used meet specified ratings? Is the Circuit Protector in an energized status?

❐Are all accessories available?

❐Can all Doors and Lids be opened with the Accessory Keys? Can Doors and Lids be firmly

closed?

TABLE OF CONTENTS

E0-0610 420-6955-02

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS

INTRODUCTION

1HANDLING PRECAUTIONS ......................................................................... 1

2PRECAUTIONS REGARDING INSTALLATION LOCATION ..................................... 5

2-1 LIMITATIONS OF USAGE................................................................................................5

2-2 OPERATION AREA ..........................................................................................................6

3PRECAUTIONS REGARDING PRODUCT OPERATION ............................. 8

3-1 BEFORE OPERATION .....................................................................................................8

3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ................................11

4PART DESCRIPTIONS................................................................................ 15

5ACCESSORIES ........................................................................................... 16

6ASSEMBLY AND INSTALLATION .............................................................. 19

7PRECAUTIONS WHEN MOVING THE MACHINE...................................... 40

7-1 MOVING THE MACHINE................................................................................................41

7-2 TRANSPORT WHEN ENTRANCE IS NARROW OR LOW ...........................................45

8GAME DESCRIPTION ................................................................................. 49

9EXPLANATION OF TEST AND DATA DISPLAY......................................... 63

9-1 SWITCH UNIT AND COIN METER ................................................................................65

9-2 SYSTEM TEST MODE ...................................................................................................67

9-3 GAME TEST MODE .......................................................................................................68

a. INPUT TEST ....................................................................................................................70

b. OUTPUT TEST ................................................................................................................73

c. GAME ASSIGNMENTS ...................................................................................................76

d. NETWORK SETTING ......................................................................................................78

e. CALIBRATION.................................................................................................................80

f. BOOKKEEPING ..............................................................................................................87

g. BACKUP DATA CLEAR ..................................................................................................90

10 MONITOR .................................................................................................... 92

10-1 CAUTIONS/WARNINGS REGARDING SAFETY FOR HANDLING THE MONITOR..92

10-2 CLEANING THE CRT SURFACES ..............................................................................94

10-3 ADJUSTMENT PROCEDURE......................................................................................95

TABLE OF CONTENTS

11 CONTROL STICK........................................................................................ 98

11-1 HOW TO REMOVE CONTROL STICK.........................................................................99

11-2 GREASING .................................................................................................................103

11-3 VOLUME REPLACEMENT.........................................................................................104

11-4 MICROSWITCH REPLACEMENT..............................................................................108

11-5 GUIDE PLATE REPLACEMENT ................................................................................110

12 THROTTLE LEVER ................................................................................... 111

12-1 GREASING .................................................................................................................112

12-2 VOLUME ADJUSTMENT OR REPLACEMENT.........................................................114

13 ROLL VOLUME ......................................................................................... 119

13-1 GREASING .................................................................................................................120

13-2 ROLL VOLUME ADJUSTMENT OR REPLACEMENT..............................................122

14 COIN SELECTOR...................................................................................... 127

15 REPLACING THE FLUORESCENT LAMPS ............................................ 129

16 PERIODIC INSPECTION ........................................................................... 134

17 TROUBLESHOOTING............................................................................... 136

17-1 ERROR MESSAGES..................................................................................................137

17-2 TROUBLESHOOTING TABLE...................................................................................139

17-3 REPLACING FUSES ..................................................................................................142

18 GAME BOARD .......................................................................................... 144

18-1 HOW TO REMOVE GAME BOARD...........................................................................145

18-2 COMPOSITION OF THE GAME BOARD ..................................................................149

19 DESIGN RELATED PARTS ....................................................................... 150

20 NETWORK PLAY....................................................................................... 151

20-1 PRECAUTIONS REGARDING NETWORK PLAY SETUP ........................................151

20-2 NETWORK CABLE CONNECTIONS.........................................................................153

20-3 NETWORK PLAY SETTING.......................................................................................155

20-4 PRECAUTIONS IN NETWORK PLAY........................................................................157

21 OPTIONAL ITEMS..................................................................................... 158

21-1 DOLLAR BILL VALIDATOR.......................................................................................158

21-2 SECURITY BAR LOWER...........................................................................................162

21-3 SECURITY BAR UPPER............................................................................................165

22 PARTS LIST............................................................................................... 168

23 WIRE COLOR CODE TABLE.................................................................... 224

24 WIRING DIAGRAM.................................................................................... 225

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all the necessary information covering the

general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

“AFTER BURNER CLIMAX.”

This manual is intended for the owners, personnel and managers in charge of operation of the product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Indicates important information that, if ignored, may result in the mishandling of

the product and cause faulty operation or damage to the product.

Sega Amusements U.S.A., Inc.

800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.

TEL: 1-847-364-9787

TOLL FREE: 1-888-877-2669

FAX: 1-847-427-1065

SPECIFICATIONS

Installation space: 1,225 mm (48.2 in.) [Width] x 1,810 mm (71.3 in.) [Depth]

Height: 1,980 mm (78.0 in.)

Weight: 440 kg (970.0 lbs.)

Power, maximum current: 586 W, 6.30 A (AC 120 V, 60 Hz Area)

Monitor: 29 Type Color Monitor

NOTE: The contents herein described are subject to change without notice.

INTRODUCTION

Use of GPL/LGPL software

This product can use GPL/LGPL software, which is open source software. This means that customers who purchase

this product can freely obtain, alter and pass-on the source code for this software (hereafter referred to as “the source

code”).

Downloaded this software is an indication of the customer’s agreement to the GPL/LGPL contract of use and thus

the download and all subsequent use of the source code is the full responsibility of the customer.

Furthermore this source code and the download service are provided totally as-is, with no guarantees of

effectiveness, completeness, usefulness or reliability, and our company offers no support concerning this source

code.

Customers using this product who wish to obtain this source code should enter the following password on the

website below to download it.

URL: http: //amproduct-softlicense.sega.jp/

ID: amsoftwebdl

Password: segaamhd1

GPL/LGPL Contract Site

URL: http: //www.fsf.org/licenses/gpl.html

URL: http: //www.fsf.org/licenses/lgpl.html

INTRODUCTION

Denition of ‘Site Maintenance Personnel or Other Qualied Individuals’

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Procedures not described in this manual or marked as 'to be carried out by site

maintenance personnel or other qualified professionals' should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that

the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary matters

herein stated can cause personal injury or damage to the machine.

• Before performing work, be sure to turn the power off. Performing the work

without turning the power off can cause an electric shock or short circuit. In the

case work should be performed in the status of power on, this manual always

states to that effect.

• To avoid an electric shock or short circuit, do not plug in or unplug quickly.

• To avoid an electric shock, do not plug in or unplug with a wet hand.

• Do not expose power cords or ground wires on the surface, (floor, passage,

etc.). If exposed, the power cords and ground wires are susceptible to damage.

Damaged cords and wires can cause an electric shock or short circuit.

• Toavoidcausingareoranelectricshock,donotputthingsonordamagethe

power cords.

• When, or after installing the product, do not unnecessarily pull the power cord. If

damaged,thepowercordcancauseareoranelectricshock.

• In case the power cord is damaged, ask for a replacement through where the

product was purchased from or the office herein stated. Using the cord as is

damagedcancausere,anelectricshockorleakage.

• Be sure to perform grounding appropriately. Inappropriate grounding can

cause an electric shock.

• Be sure to use fuses meeting the specified rating. Using fuses exceeding the

speciedratingcancauseareoranelectricshock.

• BesurethatconnectionssuchasICBDaremadeproperly.Insufcientinsertion

can cause an electric shock.

• Specicationchanges,removalofequipment,conversionand/oraddition,not

designated by SEGA are not permitted.

-Failuretoobservethismaycauseareoranelectricshock.Non-compliance

withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe

players or the onlookers, or result in injury during play.

- SEGA shall not be held responsible for damage, compensation for damage to

athirdparty,causedbyspecicationchangesnotdesignatedbySEGA.

• Be sure to perform periodic maintenance inspections herein stated.

HANDLING PRECAUTIONS

• For the IC board circuit inspections, only the logic tester is allowed. The use of a

multiple-purpose tester is not permitted, so be careful in this regard.

• When cleaning the CRT surfaces, use a soft and dry cloth. Do not apply

chemicals such as thinner, benzine, etc.

• Static electricity from your body may damage some electronics devices on the

IC board. Before handling the IC board, touch a grounded metallic surface so

that the static electricity can be discharged.

• Some parts are not designed and manufactured specifically for this game

machine.Themanufacturersmaydiscontinue,orchangethespecicationsof

such general-purpose parts. If this is the case, SEGA cannot repair or replace a

failed game machine whether or not a warranty period has expired.

Andere Handbücher für AFTER BURNER CLIMAX

Inhaltsverzeichnis

Andere Sega Arcade-Spielautomat Handbücher

Sega

Sega House Of The Dead Scarlet Dawn Bedienungsanleitung

Sega

Sega HOUSE OF THE DEAD 4 SUPER DELUXE Bedienungsanleitung

Sega

Sega TARGET BRAVO Bedienungsanleitung

Sega

Sega GRID Racing DELUXE Bedienungsanleitung

Sega

Sega F355 Challenge Montage- und Bedienungsanleitung

Sega

Sega Royal Rumble Standard Version Bedienungsanleitung

Sega

Sega Virtua Fighter 4 Evolution Fehlerbehebungshandbuch

Sega

Sega ALL AIR TRIX DLX Referenzhandbuch

Sega

Sega MISSION: IMPOSSIBLE Bedienungsanleitung

Sega

Sega Club Kart Prize Bedienungsanleitung

Sega

Sega PRIMEVAL HUNT Bedienungsanleitung

Sega

Sega Hot Racer Bedienungsanleitung

Sega

Sega House Of The Dead 3 DELUXE Bedienungsanleitung

Sega

Sega Dinosaur King Bedienungsanleitung

Sega

Sega Ghost Squad Bedienungsanleitung

Sega

Sega Snakes & Ladders Bedienungsanleitung

Sega

Sega MISSION IMPOSSIBLE ARCADE Anwendungshandbuch

Sega

Sega SOUL SURFER Bedienungsanleitung

Sega

Sega Rambo Bedienungsanleitung

Sega

Sega RALLY 3 DELUXE Bedienungsanleitung

Sega

Sega FORD RACING TWIN-FULL BLOWN Bedienungsanleitung

Sega

Sega The Maze of the Kings Bedienungsanleitung

Sega

Sega House Of The Dead Scarlet Dawn Bedienungsanleitung

Sega

Sega Triple Play Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung