Sega Hot Racer Bedienungsanleitung

Please keep this manual properly for convenient reference as needed.

For safety reasons, please read the manual first before plugging in machine.

Safety Introduction – Read before operating

This manual is intended to provide detailed descriptions together with all necessary information covering the

general

operation of electronic assemblies, electromechanical, servicing control, spare parts, etc. for the product:

This manual is intended for the owners, personnel managers in charge of operation of this product.

Operate the product after carefully reading and sufficiently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the office listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require

special attention are indicated on the game cabinet in the form of warning labels.

Warning: Proceed with caution – Only open door/cover if you are a qualified technician

High voltage can cause an electric shock

Turn off before servicing

Danger: Potential immediate danger

High voltage can cause an electric shock

Turn off before servicing

Hot Racers

Potential Risk to life or damage to product

If ignored, may result in the mishandling of the product and cause faulty operation or damage to the

product or person(s)

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance

personnel or other qualified professionals. This manual includes directions for potentially dangerous procedures

which should only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualified professionals mentioned in this manual are defined as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of

units/expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualified professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualifications in electrical/electronic/mechanical engineering.

Activities to be carried out by other qualified professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Definition of 'Site Maintenance Personnel’ or Other Qualified individuals. d

Individuals

STOP IMPORTANT

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualified professionals should not be carried

out by personnel without the necessary skill or technological experience. Work

carried out by unqualified persons may cause serious accidents, including

electrocution.

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage:

The following instructions are intended for the users, operators and the personnel in charge of the operation of the

product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the

product

appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.

• Perform work in accordance with the instructions herein stated. Instructions for work

are explained by paying attention to the aspect of accident prevention. Failing to perform work as per

the instructions can cause accidents. In the case where only those who have technical expertise should

perform the work to avoid hazardous situation, the instructions herein state that the site maintenance

personnel should perform such work.

• Be sure to turn off the power before working on the machine. To prevent an electric shock, be sure

to turn off the power before carrying out any work that requires direct contact with the interior of the

product. If the work is to be performed in the power-on status, the Instruction Manual herein always states

to that effect.

• Be sure to ground the Earth Terminal (This is not required in the case where a power cord with earth is

used).

• This product is equipped with the Earth Terminal. When installing the product, connect the Earth

Terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the product is

grounded appropriately, the user can be subject to an electric shock. After performing repair, etc. for the

control equipment ensure that the Earth Wire is firmly connected to the control equipment.

• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does

not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth

Leakage Breaker can cause a fi re when earth leakage occurs.

• Be sure to use fuses which meet the specified rating (only for the machines which use fuses). Using

fuses exceeding the specified rating can cause a fire and an electric shock (only for the machines which

use fuses). Using fuses exceeding the specified rating can cause a fire and an electric shock.

Specification changes (removal of equipment, conversion and/or addition) not designated by SEGA are not

allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It

is hazardous to operate the product by removing parts and/or modifying the circuits. Should doors, lids and

protective parts be damaged or lost, refrain from operating the product, and contact where the product was

purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation

for damage to a third party, resulting from the specifications not designated by SEGA.

• Ensure that the product meets the requirements of appropriate electrical specifications. Before installing

the product check for electrical specifications. SEGA products have a nameplate on which electrical

specifications are described. Ensure that the product is compatible with the power supply voltage and frequency

requirements of the location. Using any electrical specifications different from the designated specifications can

cause a fire and an electric shock.

• Install and operate the product in places where appropriate lighting is available, allowing warning labels

to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where the product is

operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again

immediately. Please place an order with where the product was purchased from or the office herein stated.

• When transporting or reselling this product, be sure to attach this manual to the product.

• Descriptions herein contained may be subject to improvement changes without notice.

• The contents described herein are fully prepared with due care. However, should any question arise, or errors be

found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE

LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after

transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning

on the power,check the following points to ensure that the product has been transported in a satisfactory status.

• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

• Are casters and adjusters damaged?

• Do the power supply voltage and frequency requirements meet with those of the location?

• Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector

connections cannot be made accurately. Do not insert connectors forcibly.

• Do power cables have cuts and dents?

• Are all accessories available?

• Can all doors and lids be opened with the accessory keys? Can doors and lids be firmly closed?

Thank you for choosing SEA Animation Technology's

double-screen racing game . It's a racing game

mainly for children, but also for parents to play with their

children. With high recognition, classic police theme and

interesting big eyes in demo mode. You can choose

ticket, capsule or play for fun game modes.

hot racers

INTRODUCTION

TABLE OF CONTENTS

CAUTION & WARNING STICKERS----------5

INSTALLATION---------------------------2,3

PART DESCRIPTIONS----------------- -----4

SETTINGS & OPTIONS-------------------6,7

INPUT / OUTPUT TESTS-------------------8

ERROR CODES-----------------------------8

CONTROLLER MECHANISM---------------9

WIRING DIAGRAM-----------------------10

PRODUCT SPECIFICATION----------------------1

DESIGN RELATED PARTS-----------------11

BOOKKEEPING---------------------------8

SPARE PARTS------------------------------9

PRODUCT SPECIFICATION

Indoor Only

370W

150kg

Location

Dimension

Rated

Voltage、Frequency

Power Consumption

Weight

AC220V 50HZ /60HZ

AC110V 50HZ /60HZ

* 110V voltage can be set through the power supply. Please contact the distributor for details.

NOTE:The contents herein described are subject to change without notice.

1700(W)X1500(D)X2080(H)mm

2080

1500

1700

Pass Seat LED harness

through floor hole

Fit rubber bush Fit the lock nut

Connect harness

lift

Installation accessories

parts

Installation complete

INSTALLATION

Lift main cabinet to

locate floor hole

Pass floor bolt

through cabinet hole

Pass wires from light

box into cabinet

Connect light box

wire harnesses Connect fan

wire harness

Fit left & right

character heads

to light box

Gasket

Install light box

0pen access door Remove screws from

back door that hold

the light box

Remove the light box from

the door

parts

INSTALLATION

Ticket door

Coin door

LCD

Game-machine frame

Game-Seat

Light box

Control panel

access doorSeat

Power inlet and filter

Access door

Motorcycle handles

Steering wheel

PARTS NAME

Inhaltsverzeichnis

Andere Sega Arcade-Spielautomat Handbücher

Sega

Sega THE KING OF ROUTE 66 Bedienungsanleitung

Sega

Sega D2 Referenzhandbuch

Sega

Sega VIRTUA COP Bedienungsanleitung

Sega

Sega MISSION IMPOSSIBLE ARCADE Anwendungshandbuch

Sega

Sega Outrun 2 Beilage

Sega

Sega Ford Racing Full Blown Deluxe Bedienungsanleitung

Sega

Sega NAOMI Bedienungsanleitung

Sega

Sega Racing Classic Bedienungsanleitung

Sega

Sega UFO CATCHER Bedienungsanleitung

Sega

Sega Derby Owners Club World Edition Bedienungsanleitung

Sega

Sega Double Spin Bedienungsanleitung

Sega

Sega F355 Challenge Montage- und Bedienungsanleitung

Sega

Sega Grid 42 Bedienungsanleitung

Sega

Sega BEJEWELED Bedienungsanleitung

Sega

Sega Star Wars Trilogy Bedienungsanleitung

Sega

Sega The House of the Dead 4 Bedienungsanleitung

Sega

Sega NAOMI 2 Bedienungsanleitung

Sega

Sega ATV Slam Bedienungsanleitung

Sega

Sega 2SPICY Bedienungsanleitung

Sega

Sega Virtua Fighter 4 Evolution Fehlerbehebungshandbuch

Sega

Sega 18 Wheeler Bedienungsanleitung

Sega

Sega OUTRUN 2 SPECIAL TOURS SDX Bedienungsanleitung

Sega

Sega Let's Go ISLAND! Bedienungsanleitung

Sega

Sega Sonic Allstarts Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung