Seiko 6R20 Bedienungsanleitung
Cal. 6R20
INSTRUCTIONS (P. 3)
BEDIENUNGSANLEITUNG (S. 25)
INSTRUCTIONS (P. 47)
ISTRUZIONI (P. 69)
INSTRUCCIONES (P. 91)
INSTRUÇÕES (P. 113)
(135 )
English
2
You are now the proud owner of a SEIKO Automatic Watch Cal. 6R20. To ensure its optimum
performance, please read the instructions in this booklet carefully before using it. Please keep this
manual handy for ready reference.
Sie sind jetzt stolzer Besitzer einer SEIKO Automatikuhr Kal. 6R20. Lesen Sie diese
Bedienungsanleitung vor der Verwendung aufmerksam durch, um ihre optimale Nutzung zu
gewährleisten. Heben Sie diese Bedienungsanleitung gut auf, um jederzeit wieder nachlesen zu
können.
Vous voici l'heureux propriétaire d'une montre automatique SEIKO Cal. 6R20. Pour en obtenir des
performances optimales, veuillez lire attentivement cette brochure avant d'utiliser la montre.
Conservez ce manuel pour vous y référer en cas de besoin.
Congratulazioni per l’acquisto di questo nuovo Orologio Automatico SEIKO Cal. 6R20. Per poter
utilizzare l’orologio al massimo delle sue prestazioni leggere attentamente questo manuale di
istruzioni prima di passare all’uso dell’orologio stesso, e conservarlo poi per qualsiasi eventuale
futura consultazione.
Usted es ahora el orgulloso propietario de un Reloj Automático de SEIKO Cal. 6R20. Para asegurar
el óptimo rendimiento de su reloj, sírvase leer cuidadosamente las instrucciones contenidas en este
manual antes de su uso. Guarde este manual en un lugar muy accesible para la rápida referencia.
Você poderá agora sentir-se orgulhoso de possuir um Relógio Automático SEIKO Cal. 6R20. Para
garantir o seu excelente rendimento, leia atentamente as instruções contidas neste opúsculo antes
de usá-lo. Conserve este manual para consultas futuras.
歡迎購買精工 6R20 機型自動手錶。為保證在最佳狀態下操作手錶，請在使用手錶之前仔細
閱讀本手冊內的各項使用說明。並妥善保管本使用手冊以備今後參考。
ENGLISH
3
CONTENTS
Page
CHARACTERISTICS OF A MECHANICAL WATCH .................................................... 4
NAMES OF THE PARTS ............................................................................................. 5
HOW TO USE ............................................................................................................. 7
HOW TO SET THE TIME, DAY AND DATE ................................................................ 9
HOW TO READ THE POWER RESERVE INDICATOR ................................................ 12
TO PRESERVE THE QUALITY OF YOUR WATCH ...................................................... 14
PLACES TO KEEP YOUR WATCH .............................................................................. 18
NOTES ON OVERHAUL .............................................................................................. 19
NOTES ON GUARANTEE AND REPAIR ..................................................................... 19
TROUBLESHOOTING. ................................................................................................ 20
ACCURACY OF MECHANICAL WATCHES ................................................................ 21
SPECIFICATIONS ........................................................................................................ 23
English
4
CHARACTERISTICS OF A MECHANICAL WATCH
(self-winding type, automatic winding type)
●This mechanical watch operates using power obtained from a mainspring.
●If the watch is completely stopped, manually turn the crown approximately 20
times to wind up the mainspring to start the watch.
●While loss/gain of a quartz watch is indicated by a monthly or annual rate,
accuracy of a mechanical watch is normally indicated by a daily rate (loss/gain per
day).
●Normal usage accuracy of a mechanical watch varies according to conditions of
use (time period that the watch is worn on the wrist, temperature environment,
hand movement, and winding state of the mainspring).
●When the watch is affected by strong magnetism, it temporarily gains or loses
time. If the watch encounters a strong magnetic field, the parts of the watch may
be magnetized. In this case, repairs such as removal of magnetism are required.
Contact the retailer from whom the watch was purchased.
CAL. 6R20
English
5
NAMES OF THE PARTS
a)
Normal position : winding up the mainspring (manual operation)
b)
First click position : day and date settings
c) Second click position : time settings
Power reserve
indicator
Hour hand
Second hand
Minute hand
Date
CROWN
abc
CROWN
Day
English
6
●Check the type of the crown of your watch
Turn the
crown
clockwise.
The crown
turns.
Go to
"HOW TO
USE"
The crown
does not
turn.
Unscrew the crown by turning it
counterclockwise.
To set the watch
The crown of your watch is
*the screw lock type.
Unscrew.
Screwup.
*If your watch has a screw-lock crown, the crown will screw into the watch case for
added protection.
•After completing all settings of the watch, screw the crown in again by
turning it clockwise while pressing it.
•If the crown turns out to be too stiff to be screwed up, turn the crown
counterclockwise once and then give another try.
•Do not screw it in by force as it may damage the slots of the crown.
English
7
HOW TO USE
This watch is an automatic watch equipped with a manual winding mechanism.
•When the watch is worn on the wrist, the motion of the wearer's arm winds the
mainspring of the watch.
•If your watch is completely stopped, it is recommended that you manually wind
the mainspring by turning the crown.
1. Slowly turn the crown clockwise (the 12
o’clock direction) to wind the mainspring.
*Turning the crown counterclockwise (the 6
o’clock direction) does not wind the
mainspring.
●How to manually wind the mainspring by turning the crown
2. Wind the mainspring until the power reserve
indicator shows a full-wound state. The
second hand will start moving.
3. Set the time, day and date before putting
your watch on the wrist.
English
8
*To check the winding state of the mainspring, refer to "HOW TO READ THE POWER
RESERVE INDICATOR " on page 12.
*There is no need to turn the crown further when the mainspring is fully wound. But
the crown can be turned without damaging the watch mechanism.
*Once the watch is wound up fully, it operates for about 45 hours.
*If the watch is used without being wound up fully, gain or loss of the watch may
result. To avoid this, wear the watch for more than 10 hours a day. If the watch is
used without wearing on the wrist; if it is used on the desk like a clock, for example;
be sure to wind it up fully every day at a fixed time.
*If you use a watch that has stopped with the mainspring unwound, winding the
mainspring with the crown will not start the watch immediately. That is because the
mainspring torque (force) is low at the beginning of its winding due to the
characteristics of mechanical watches. The second hand starts to move when a
certain degree of strong torque is reached after the mainspring has been wound up.
However, swinging the watch from side to side to forcibly turn the balance can start
the watch sooner.
English
9
HOW TO SET THE TIME, DAY AND DATE
•Check that the watch is operating, and then set the time, day and date.
•The watch is provided with a day and date function and is so designed that the day
and date changes once every 24 hours. The date changes around 12 o’clock
midnight, and the day around 2:00 a.m. If AM/PM is not properly set, the date will
change around 12 o’clock noon, and the day around 2:00 p.m.
1. Pull out the crown to the first click. (The second
hand continues moving and the accuracy of the
watch is unimpaired.)
2. The day can be set by turning the crown clockwise.
3. The date can be set by turning the crown
counterclockwise. Turn it until the previous day’s
date appears.
Ex.) If today is the 6th of the month, first set the date
to “5” by turning the crown counterclockwise.
CAUTION
•Do not set the date between 10:00 p.m. and 1:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
English
10
CAUTION
•The mechanism of mechanical watches is different from that of quartz
watches.
When setting the time, be sure to turn back the minute hand a little behind
the desired time and then advance it to the exact time.
4. Pull out the crown to the second click when the second hand is at the 12 o’clock
position. (The second hand stops on the spot.)
Turn the crown to advance the hands until the date changes to the next. The time
is now set for the a.m. period. Advance the hands to set the correct time.
5. Push the crown back in to the normal position in accordance with a time signal.
Andere Handbücher für 6R20
2
Inhaltsverzeichnis
Andere Seiko Betrachten Handbücher
Seiko
Seiko 4F series Gebrauchs- und Pflegehandbuch
Seiko
Seiko PROSPEX SNE567 Bedienungsanleitung
Seiko
Seiko YT57B Kurzanleitung
Seiko
Seiko 7d46A Kurzanleitung
Seiko
Seiko KINETIC 5M43 Bedienungsanleitung
Seiko
Seiko 7002 Bedienungsanleitung
Seiko
Seiko Cal. 4R15 Bedienungsanleitung
Seiko
Seiko ASTRON 8X82 GPS SOLAR Bedienungsanleitung
Seiko
Seiko S056 Bedienungsanleitung
Seiko
Seiko Cal. V175 Bedienungsanleitung
Seiko
Seiko S610A Installationshandbuch
Seiko
Seiko 6G34 Bedienungsanleitung
Seiko
Seiko 7K52 Bedienungsanleitung
Seiko
Seiko ANALOGUE QUARTZ SOLAR V145 Bedienungsanleitung
Seiko
Seiko Coutura SSC764P Bedienungsanleitung
Seiko
Seiko 7T52 Bedienungsanleitung
Seiko
Seiko A156A Kurzanleitung
Seiko
Seiko KINETIC AUTO RELAY 5J21 Bedienungsanleitung
Seiko
Seiko 4F56 Bedienungsanleitung
Seiko
Seiko C-20 Bedienungsanleitung
