SEM 344 Series Kurzanleitung
Security Engineered Machinery Co., Inc
OPERATIONAL & MAINTENANCE MANUAL
SEM Model 344
POP-0010
REV: 0
As of November 19, 2012
Security Engineered Machinery Co., Inc
NATIONWIDE SERVICE
Phone Toll Free 1(800)225-9293
Email: [email protected]
Fax: (508)366-6814
Website: WWW.SEMSHRED.com
2
For NATIONWIDE SERVICE Call 1(800)225-9293
***IMPORTANT SAFETY PROCEDURES***
Your new paper shredder incorporates powerful, heavy duty cutting mechanisms, serious and permanent
injury may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained
or incapable of understanding these safety precautions!
2. Do not reach into the feed opening for any reason! Never insert fingers, hands, other
extremities, or objects not meant to be shredded into the feed opening!
3. Do not operate or come in close proximity to this equipment wearing long hair,
necktie, loose clothing, or jewelry which may activate a photoelectric on/off switch
and/or be pulled into the shredder.
4. Maintenance or repair of this equipment should be performed only be trained,
authorized service personnel.
5. Always disconnect electrical power (unplug) before removing or opening the cover or
other panels providing access to internal mechanisms.
SPECIFICATIONS
Shred Size 0.8 mm x 2.5 mm
Sheet Capacity * Up to 8 Sheets per pass
Feed Opening 10.25”
Dimensions 36.5”H x 19.5”W x 18.5”D
Weight 106 lbs.
*Results may vary depending on power source, operator/proper maintenance and paper grade.
3
For NATIONWIDE SERVICE Call 1(800)225-9293
Table of Contents
READ CAREFULLY BEFORE USING
Proper care of your new paper shredder will ensure many years of trouble free operation, with minimum of
maintenance or repair.
IMPORTANT: Please note that all packaging should be retained by the customer for (30) days from the
time of receipt. In the event that this unit needs to be sent back for replacement or repair this packaging will
be required to do so. Should the packaging have been discarded before the (30) day requested period,
packaging costs will be incurred by the customer.
Contents PageNo.
Safety Procedures…………………………………………………………………………………………..2
Table of Contents…………………………………………………………………………………………..3
Safety Precautions………………………………………………………………………………………..4-5
Installation and Set-up………….…………………………………………………………………..............6
Operation and Feeding …………………………………………………………………………….…...7-10
Troubleshooting.…………………………………..…………………………………………………...11-14
Accessories..............……………………………………………………………………………………….15
Technical Information……………………………………………………………………………………..16
Parts List………………………………………………………………………………………………..17-23
Customer Service
Security Engineered Machinery Co., Inc.
PO Box 1045
5 Walkup Drive
Westboro, MA 01581
Tel: 800-225-9293 Fax: 508-366-6814
Order On-line:
GSA Customers: www.fedshred.com
Commercial Customers: www.semshred.com
IMPORTANT
Two to three preventive maintenance calls per year are recommended
Only authorized SEM service personnel should be allowed to service the shredder.
4
For NATIONWIDE SERVICE Call 1(800)225-9293
SAFETY PRECAUTIONS
The door must be closed when operating the
document shredder.
Ensure free access to mains.
Automatic standby that switches off after 1 hour;
green LED control light is off.
5
For NATIONWIDE SERVICE Call 1(800)225-9293
SAFETY PRECATIONS Cont…
Remove plug before cleaning the machine.
Do not operate the machine without the safety flap (A).
ON/OFF→Quick stop→Open the door!
6
For NATIONWIDE SERVICE Call 1(800)225-9293
INSTALLATION
Open the door; place the machine into the top
of the cabinet. We recommend that two people
set up this unit! Beware of fingers!
Installing the oiler:
• Take the oiler holder out of the cabinet and hook it into the
side of the cabinet (A).
• Remove the lid from the oiler (B)
• Remove the stopper from the oil tube (C)
• Put the oil tube into the oiler and screw on (D)
•The oil bottle has a fill level indicator (E)
Close the door; Plug into wall socket.
7
For NATIONWIDE SERVICE Call 1(800)225-9293
OPERATION
When Using for the first time the oil pump starts
automatically:
•Press after approximately 15 seconds and a red blinking
LED (A) disappears.
When the oil bottle (B) is changed:
•Press the rocker switch “R” until the LED (A) no longer
blinks red.
Flashing LED (A):
•Cutting shafts are automatically oiled.
Warning:
Materials other than common office paper may jam and /or
damage the cutting unit. Paper clips and staples should be
removed from material being destroyed to prolong life and
trouble-free operation of the cutting unit.
8
For NATIONWIDE SERVICE Call 1(800)225-9293
OPERATION Cont….
Press the rocker switch (1): green light is on, the
machine is now ready for operation. Starts automatically
when paper is inserted. Automatic standby that switches
off after (1) one hour Green LED control light is off.
LED shows red (A).
Stops automatically if too much paper is inserted.
Automatic reverse if too much paper is inserted.
LED shows yellow (B).
Maximum sheet capacity during shredding process.
LED Shows green (C).
Normal sheet capacity during shredding process.
Important: Between paper insertion allow the
machine to return to the LED green light. (C) If you
insert paper while the LED yellow light (B) is lit you may
cause a paper jam, (See page 10 for paper jams).
Stops automatically when no further paper is inserted.
9
For NATIONWIDE SERVICE Call 1(800)225-9293
OPERATION Cont….
Stops automatically when door is opened symbols
and flash alternatively.
Stops automatically when plastic bag is full. Empty
the bag when “bag full” indicator lights. (see page 6)
Stops automatically if too much paper is inserted.
Automatic reverse if paper jams
(Symbol “ON/OFF” flashes).
10
For NATIONWIDE SERVICE Call 1(800)225-9293
OPERATION Cont….
If required: (Paper Jam)
Press the rocker switch “R” and remove paper. (Machine
runs for a short time in reverse, if required repeat several
times).
Reset by pressing the rocker switch . Re-feed the
paper in smaller quantities.
Automatically stops if safety flap (A) is opened
(symbols and flash alternatively). Close the safety
flap and press the rocker switch , paper is shredded. To
remove any paper debris from a paper jam the machine
runs for a short time reverse with open safety flap.
Inhaltsverzeichnis
Andere SEM Aktenvernichter Handbücher
SEM
SEM 0303 Bedienungsanleitung
SEM
SEM Model 0202 OMD Installationsanleitung
SEM
SEM 5146P Series Bedienungsanleitung
SEM
SEM 126C/2 Kurzanleitung
SEM
SEM 2226 Series Bedienungsanleitung
SEM
SEM 0201 Bedienungsanleitung
SEM
SEM 2226CC/3 Kurzanleitung
SEM
SEM DS-400 Bedienungsanleitung
SEM
SEM 0300 Kurzanleitung
SEM
SEM 0205NANO Bedienungsanleitung
SEM
SEM 1121P Kurzanleitung
SEM
SEM 250 Bedienungsanleitung
SEM
SEM 0205 Bedienungsanleitung
SEM
SEM 0304 Bedienungsanleitung
SEM
SEM 0202 Bedienungsanleitung
SEM
SEM 1125P Kurzanleitung
SEM
SEM 2226 Series Bedienungsanleitung
SEM
SEM 1324P Bedienungsanleitung
SEM
SEM 7050P Bedienungsanleitung
SEM
SEM 800-1000 Series Bedienungsanleitung
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
