SEM 4140CLK Bedienungsanleitung
Pleaseread this manual carefull~ It will answer all your questions
regarding installation, operation and trouble-shooting.
IMPORTANT:
Be sure to adhere to all safety suggestions listed.
Read carefully before using.
THE WORLD LEADER IN DOCUMENT AND SENSITIVE WASTE DESTRUCTION
SOLUTIONS
WaJ _.W;. SHREDDERS. DISINTEGRATORS.SECURITYWASTE
~Z:1~21 CONTAINERS.DEGAUSSERS
5 Walkup Drive . Westboro,MA01581
.-~~. -
READ CAREFULLY BEFORE USING
These Paper Shredders are designed for the in-office destruction of paper documents to
an unidentified waste. Be sure to remove staples and paper clips from the materials
to be destroyed. Proper care and use of your shredder will insure many years of trouble
free operation.
Content. . . . . . . . . . .. . . .. . . . . . . . . . . . .. . . .. . . . . .PageNo.
InstallationandSet-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operation 3
Overloading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DoorOpening/BagFulllndicator 4
Lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
TechnicalData. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
UsingandOrderingSpareParts 5
OptionalItemsAvailable. . . . . . . . . . . . . . . .".. . . . . . . . . . . . . . . . . . . . . . . . .5
CustomerService. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Operation 7
HousingDiagramand PartsBreakdown. . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
CuttingHeadDiagramsandPartsBreakdown. . . . . . . . . . . . . . . . . . . . . .10-13
DriveDiagramandPartsBreakdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-17
ElectricDiagramandPartsBreakdown. . . . . . . . . . . . . . . . . . . . . . . . . . .18-21
Yournewpapershredderincorporatespowerful.heavydutycuttingmechanisms.
Serious and permanentinjury may result if properprecautionsarenotfollowed.
1. This equipment should never be operated by children or individuals
untrained in or incapable of understanding the safety precautions!
2. Do not reach into the feed o~ning for any reason! Never insert fingers,
hands, other extrematies or objects not meant to be shredded into the
feed openings!
3. Do not operate or come in close proximity to this equipment wearing long
hair, necktie, loose clothing or Jewelry, wnich may activate a photoelectric
on/off switch and/or be puned Into the machine!
4Maintenance or repair of this equipment should be perfonned only by
trained, authorized service personnel.
5. Always disconnect electric power (unplug) before removi"9 or opening
the cover or other panel giving access to internal mechanisms.
Openthe cabinetdoorby lightlypullingonthe upperrightcomerofthedoor. Pullthewasteboxfor-
wardandoutof thecabinet. Insertthe plasticwastebaginthe wasteboxfoldingthe excessover.
Pushthe boxinandclosethedoor. PlugShredderinto20 ampwalloutlet.
These models canbeoperatedbyturning the switch in the back of the shredder on and by using the
'forward', 'stop', and 'reverse' touch type push buttons. Use these buttonswhen cleaning the cutter
system or to clear a jam.
IMPORTANT: Materials other than common office paper may jam and/or damage the cutting unit.
Paper clips and staples should be removed from material being destroyed, to prolong life and trouble-
free operation of the cutting unit.
Iftoo much paper is fed into the machine, it will switch off automatically. Following a brief pause, the
machine will reverse automatically and the excess paper can be easily removed. Thin out the quanti-
ty of paper before resuming shredding. Ifthe cutting mechanism is frozen, do not attempt to run the
shredder alternately in the forward and reverse modes until the clogged material is released. Call for
service.
The motor is protected by a thermal overload device. Should the motor overheat, the thermal over-
load unit will automatically stop the motor. Should this occur, wait a brief period of time and let the
motor cool off.
For safety reasons, the shredder will not operate when the cabinet door is open.A red indicator light
on the control panelwill alert the user if the door is ajar.
Whenthewastebagisfull,the shredder will shut offautomatically.A redindicatorlightonthe control
3
panel will alert the user that it is time to change the waste bag.
LUBRICATION
IMPORTANT:To prevent jamming and/or clogging the shredder, it is necessary to frequently lubricate the
cutting unit and run it in reverse. For continuous shredding, the unit should be lubricated every 15 minutes.
Alternatelyrun the machine forward and then in reverse several times to clean the cutting unit. Squirt the
SEM shred oil directly onto a piece of paper in a figure 8 motion, then feed into machine. Then run it in
reverse. This avoids getting oil into the optics. Too much oil is better than not enough. You are again ready
to start shredding.
Two to three preventative maintenance calls per year are recommended. Only authorized service person-
nel should be allowed to service the shredder.
IMPORTANT:Always unplug the shredder before performingany maintenance. If shredding capacity drops
or the machinejams easily, clean and lubricate the cutting system as outlined in the "Lubrication" section of
this manual.
4140CLK
up to 11Sheets
1/32" x 1/2"
16"
20 FPM
1-1/4HP
5140CLK
up to 14Sheets
1/32" x 7/16"
16"
30 FPM
2.2 HP
5140P
up to 35 Sheets
5/16" x 1-7/8"
16"
40 FPM
2.2 HP
Shred Capacity:
Shred Size:
Throat Width:
Speed:
Horsepower:
Dimensions
(H x W x D):
Weight:
Power:
41"x23"x20"
285 Ibs.
115/1/60
41"x22-5/8"x20-3/8"
195 Ibs.
115/1/60
41"x23-3/4"x21-1/2"
209Ibs.
115/1/60
4
.OnlyuseoriginalSEMsparepartreplacements
. We guarantee their quality and functional reliability
Warrantyclaimson partsand/orservicemustbeapprovedbySEMis
CustomerServiceManager
HINTS FOR ORDERING SPARE PARTS
The spare partsshown on the following pages have part numbers. This spare parts list shhows
the following information with respect to the spare parts to be ordered.
.PartNo.
. Designation .Quantity
.Dimensions
. ItemNo.
In order to aviod errorss and the delivery of wrong parts, each partsorder should contain the
following information.
. Machine Type and Serial No. (See nameplate)
. Part No. and designation of desired spare parts
. Quantity of desired spare parts
. Desired mode of shipment (e.g. post, freight, express)
. Full billing & shipping addresses, including contact person & telephone
OPTIONAL ITEMS AVAILABLE
Replacement Plastic Waste Bags Part No. 639SB140
Shredder Lubricating Oil, Case of 8 pints, Part No. 64901L8
Shredder Lubricating Oil, Case of 16 pints, Part No. 64901L16
Shredder Lubrication Oil, Case of 8 400z bottles Part No. 6490ILCLK (Used w/CLK Models)
5
Toorder spare parts or optional items you may contact the Authorized Service Rep. for your area, or SEM's
Customer Service Dept. directly at the following address:
Security Engineered Machinery
P. O. Box 1045
Westboro, MA 01581
Tel: 800-225-9293
Fax: 508-366-6814
Website: Commerical www.semshred.com
Govern ment www.fedshred.com
Email: [email protected]
8
Please Read and Observe the Operating and Safety Instructions
The machine is designed for shredding smooth sheets of papers.Automatic operation with manual
feeding of paper.
Forcarryingthe machine,usehandlerod(12).
The handle rod is located at the left of the substructure. This plug-in unit is ready for operation,
Details on the nameplate (9) -Voltage "V', Frequency "Hz", Current consumption "A" - must be in
accordance with the mains supply. Connect the machine to power.
If the green LED (3) illuminates the machine is ready for operation.
Feed paper into the middle of the paper insert (1).
After shredding the machine switches off.
When paperjams in the paperfeeder (1):
- Removepaper
-Feedsmallamountof paper.
Indicator(6)illuminates- wastereceptacle(13)isfull.
-Opendoor
- Pressdowncutwasteintothe receptacle.- Pullout receptacleandempty.
Doorswitchindicator(7) illuminates-doorisopen
-Closethedoor
NOTE:
- Machine is only ready for operation when the door is closed.
- Regularly check the function of the door switch.
If the door is opened, the machine will immediately shut down.
Problem: Start switch (4) doesn't function and green LED (3) does
not illuminate.
Remedy: Wait approx. 15 to 20 minutes for motor thermal overload
to reset.
Problem: Machine does not automatically switch off.
Remedy: Clean LED (1) with a brush.
7
DIAGRAMS
&
PART NUMBERS
Andere Handbücher für 4140CLK
1
Dieses Handbuch passt für folgende Modelle
2
Andere SEM Aktenvernichter Handbücher
SEM
SEM 1121P Kurzanleitung
SEM
SEM DS-400 Bedienungsanleitung
SEM
SEM 6040P Bedienungsanleitung
SEM
SEM 0303 Bedienungsanleitung
SEM
SEM 2226 Series Bedienungsanleitung
SEM
SEM 135/2 Installations- und Betriebshandbuch
SEM
SEM 266 Series Bedienungsanleitung
SEM
SEM 2226 Series Bedienungsanleitung
SEM
SEM Model 0202 OMD Installationsanleitung
SEM
SEM 3130P Kurzanleitung
SEM
SEM 7050P Kurzanleitung
SEM
SEM 1324C/3 Kurzanleitung
SEM
SEM 2226CC/3 Kurzanleitung
SEM
SEM IDShred65 Bedienungsanleitung
SEM
SEM 1125P Kurzanleitung
SEM
SEM 4140CLK Montageanleitung
SEM
SEM 0201 OMD Kurzanleitung
SEM
SEM 800-1000 Series Bedienungsanleitung
SEM
SEM 1012/5 Bedienungsanleitung
SEM
SEM 0201 Bedienungsanleitung
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
