Senis 3MTS Installationshandbuch

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180125_V.3.0.DOCX 1

3MTS Operation Manual

3-axis USB Handheld Teslameter

3MTS_OPMANUAL_EN_20180125_V.3.0.DOCX

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 2

General Information

The operational safety and functioning of the device can only be guaranteed if both the general

safety and accident prevention regulations given by legislator, as well as the safety instructions

provided in this Operation Manual are fully considered. We assume no liability for damages caused

by the improper use or incorrect device operation.

Make sure that persons responsible for the device and its operation have

read and understood this Operation Manual.

After you have read this manual, keep it in a safe place where it can be accessed at any time if

necessary.

Contact:

Matesy GmbH

Magnetische Technologien & Systeme

Otto-Schott-Str. 13

07745 Jena

Phone : +49 3641 7979 900

e-mail: info@matesy.de

www.matesy.de

SENIS AG

Neuhofstrasse 5a

6340 Baar

Phone : +41 43 205 26 37

e-mail: info@senis.ch

www.senis.ch

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 3

Table of Contents

Safety Precautions ...........................................................................................................................

1.1

Awareness of Operation Manual ............................................................................................

1.2

Informal Security Measures ....................................................................................................

1.3

Operator Training ....................................................................................................................

1.4

Constructional modifications to the device ............................................................................

1.5

Warnings..................................................................................................................... .............

Application Notes ............................................................................................................................

2.1.1

Installation Site ....................................................................................................................

2.1.2

Device Transportation .........................................................................................................

2.1.3 Store and protect during the interruption of normal use ...................................................

Product Description .........................................................................................................................

3.1

Introduction ................................................................................................................ .............

3.1.1 3MTS-1.................................................................................................................................

3.1.2 3MTS-2.................................................................................................................................

3.2

Magnetic and Electrical Specification ....................................................................................

Application Program ......................................................................................................... .............

4.1

Software Installation ....................................................................................................... ......

4.2

Start the Application Program MHM.....................................................................................

4.3

Main Application ...................................................................................................................

4.3.1

Menu bar ...........................................................................................................................

4.3.2

Measurement Display .......................................................................................................

4.3.3 Values / Plots / Graphics ...................................................................................................

4.3.4

Measurement Configuration - Values ...............................................................................

4.3.5

Status bar .................................................................................................................. .........

4.4

Setup ......................................................................................................................................

4.5

Change the Language ............................................................................................................

4.6

Save/Record Measurement ...................................................................................................

4.7

Save Plot ................................................................................................................... .............

4.8

„Information“ Window ........................................................................................................ ..

4.9

Close Application ........................................................................................................... ........

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 4

1 Safety Precautions

1.1 Awareness of Operation Manual

Any commissioning and handling on the device requires the exact awareness of and compliance to

these operating instructions. The device is intended for use according to the described application

notes only. In this manual, particularly important comments are highlighted as follows:

WARNING !

This is a warning that points to risks and dangers. Disregarding this warning can

lead to life-threatening situations. These warnings must be considered and

respected.

Information !

This is an information which points to certain necessary, characteristics.

1.2 Informal Security Measures

The Operation Manual must always be kept at the place where the device is used. In addition to the

operating instructions, the general regulations as well as the local regulations for accident prevention

and environmental protection must be provided and respected. All safety precautions for the device

must be kept in readable condition.

1.3 Operator Training

The device may only be operated by trained personnel. Apprentices should work on the device under

the supervision of an experienced person.

1.4 Constructional modifications to the device

Modifications or alterations to the device which influence the functioning of the device, without the

manufacturer's permission, are prohibited. All device modifications require a written confirmation by

the manufacturer. The device or its parts must be replaced by the manufacturer with original spare

parts.

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 5

1.5 Warnings

Risk of injury from electric strike!

Before cleaning, the device must be disconnected from the supply voltage by

removing the USB cable from the USB port of the personal computer or tablet.

Do not modify, bend, mechanically stress, pull, heat, or expose the USB cable to

heat or cold sources. Do not squeeze the cable or damage it by sharp edges. The

cable guide on the device must not be loaded by pulling. There must always be a

sufficient cable length from the probe to the personal computer.

If damage is observed, the device must be taken out of operation immediately.

Contact the manufacturer in this case.

Danger by liquids!

To reduce the risk of fire or electric shock, do not expose the unit to rain or

moisture. No liquid must penetrate the housing, nor may the electrical

components come into contact with a liquid. The device must be completely dry

before turning it on again

Danger due to magnetic fields!

The device measures magnetic fields, such as the magnetic field of permanent

magnets. Never stick unsecured magnets together. There is a risk of crushing

and cutting. Do not allow any iron parts (e.g. tools) to lie around.

Do not put the credit cards near the magnets. These could be deleted or

damaged.

Heart pacemakers can be interfered by the magnetic field, so inform your

employees on dangers that might be caused by strong magnets!

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 6

2 Application Notes

The 3MTS can be commissioned by the customer according to the operating instructions. In case of

problems the manufacturer has to be immediately contacted.

2.1.1 Installation Site

Proper installation site.

The device is to be kept and used for measurement in a dry (humidity <60%, no

direct or indirect water effect), dust-free and low-vibration environments.

All components and connectors must be freely accessible and must not be

blocked by obstructions.

The manufacturer accepts no liability for infringements.

2.1.2 Device Transportation

Transportation after the measurement.

The customer is free to change the location of the measuring system. Switch the

device off by disconnecting the USB cable and protect the device using the

original packaging.

2.1.3 Store and protect during the interruption of normal use

Store and protect.

Switch off the device by disconnecting the USB cable and protect the device

using the original packaging.

Store the device in the original packaging in a safe and protected place to

protect it from environmental influences and from damage. Before re-using the

device, check for external damages. If damage is detected, do not switch on the

device and inform the manufacturer accordingly.

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 7

3 Product Description

3.1 Introduction

The 3MTS is a handheld Teslameter / Gaussmeter with integrated USB interface. It was developed in

cooperation between the two companies SENIS and Matesy.

The 3MTS has a fully integrated three-axis Hall probe (see Figure 1).

Figure 1: Dimension of the field-sensitive volume of the fully integrated 3-axis Hall sensor chip

The Hall probe is connected to a compact and light electronic module that provides the measured

signal acquisition and signal-conditioning; Integrated 12-bit AD conversion; the device calibration;

and an USB connection to the host computer. The temperature sensor integrated in the Hall probe

chip allows a temperature-compensated output signal for all three magnetic field components (Bx, By

and Bz). The easy-to-use Teslameter software running on a MS Windows computer, tablet or

smartphone is used for the data acquisition, Teslameter power supply and control and for measured

data visualization. The measured data are visualized in numerical and graphical colored displays,

allowing an easy readability and intuitive setup of alarm triggers, hold function and measured data

storage. The total value of the magnetic field, as well as all three components of the magnetic field

and the probe temperature are displayed. In addition, the min/max values of the magnetic field

components can be presented.

The 3MTS Teslameter has two versions:

Version 1 (3MTS-1): Carbon-fiber probe holder for extreme robustness and flexibility;



Version 2 (3MTS-2-Xm): Probe connected by a thin cable (cable lengths: 1 m, 2 m, 5 m).



3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 8

3.1.1 3MTS-1

The 3MTS-1 utilises a fully integrated three-axis Hall probe, which is integrated into a specially

developed carbon fiber holder to ensure the mechanical protection of the probe (see Figure 2 and

Figure 3).

The probe holder is 5 mm wide and only 1 mm thick to allow a measurement of the magnetic field in

narrow air gaps. In the region of the tip of the probe holder, the three-axis magnetic field sensitive

Hall sensor chip is integrated (see A in Figure 3).

Dimensions

X [mm]

Y [mm]

Z [mm]

Magnetic Field

0.14

0.01

0.14

Sensitive

Volume (MFSV)

Position of the

-2.5 ± 0.1

0.65 ± 0.05

-1 ± 0.1

center of MFSV

Figure 2: Standard Dimensions 3MTS-1 Handheld Teslameter (side view). All measures are given in millimeters.

Figure 3: 3MTS-1 Handheld Teslameter (carbon fiber probe holder)

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20181202_V.3.1.DOCX 9

3.1.2 3MTS-2-X m

The 3MTS-2-X m utilises a fully integrated three-axis Hall probe, which is connected to the electronic

module through a thin cable (see Figure 4). The thin CaH cable can be provided in three different

lengths: 1 m, 2 m and 5 m. The probe can be fixed on a customer-made probe holder.

Figure 4: Dimensions of the C-type Hall probe, electronic module and Cable CaH (available lengths: 1 m, 2 m, 5 m). All measures are given

in millimeters

Dimensions

X [mm]

Y [mm]

Z [mm]

Magnetic Field

0.14

0.01

0.14

Sensitive

Volume (MFSV)

Position of the

-2.0 ± 0.1

0.55 ± 0.05

-0.5 ± 0.1

center of MFSV

Total probe external

dimensions

4.0 ± 0.1

0.90 ± 0.05

8.0 ± 0.1

Cable CaH

Available lengths: 1 m, 2 m, 5 m

Flexible shielded cable

(L=50 mm, OD<0.7

mm)

Hall

probe

(ext. diam. 1.7±0.1) mm

3MTS: Operation Manual

3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX 10

3.2 Magnetic and Electrical Specification

Unless otherwise noted, the specifications summarized in the table below apply for all three

measurement channels Bx, By, and Bz at the room temperature (23°C) and after a 15 minutes device

warm-up time.

Parameter

Value

Standard measurement ranges

± 100 mT

± 500 mT

± 3 T

± 20 T

Linear/Calibrated range of magnetic

± 100 mT

± 500 mT

± 2 T

flux density (± BLR)

Total Accuracy

< 1 % of B

range

(@ B < ± BLR)

Planar Hall Voltage impact

< 0.01 % of Bperpendicular

(@ B < ± BLR)

Long-term instability

< 1 % over 10 years

Magnetic Resolution

< 400 µT

< 1.8 mT

< 11 mT

(no averaging)

Magnetic Resolution

< 20 µT

< 70 µT

< 320 µT

(with averaging; integration time 1s)

AD Conversion

12 bits

Sampling frequency [fs]

1 kHz per measurement channel

Frequency bandwidth [fc]

fc >> fs

Operating temperature range

-20 °C to +85 °C

Inhaltsverzeichnis

Andere Senis Messgerät Handbücher

Senis

Senis 3MH6 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung