Sennheiser RS 2000 Bedienungsanleitung
RS 2000
RS 2000
Wireless TV headphones
Instruction manual
2|RS 2000
Contents
Important safety instructions ...................................................................... 3
Package contents ........................................................................................... 6
Product overview ........................................................................................... 7
Putting the RS 2000 into operation ............................................................ 9
Setting up the transmitter .......................................................................... 9
Connecting the transmitter to an audio source .................................... 10
Connecting the transmitter to the power supply system ................... 13
Charging the stethoset receiver’s rechargeable battery ..................... 14
Using the RS 2000 ........................................................................................ 15
Switching the wireless headphone system on ...................................... 15
Switching the wireless headphone system off ...................................... 16
Wearing the stethoset receiver ................................................................ 17
Adjusting the volume ................................................................................. 17
Adjusting the balance ................................................................................. 18
Cleaning and maintaining the RS 2000 .................................................... 19
Replacing the stethoset receiver’s rechargeable battery .................... 20
Using additional functions ......................................................................... 21
Pairing one or several stethoset receivers with the transmitter ....... 21
Charging the rechargeable battery using the MCA 800 charging
adapter .......................................................................................................... 22
If a problem occurs ... ................................................................................... 23
Leaving the range of the transmitter ...................................................... 24
Specifications ................................................................................................ 25
Manufacturer Declarations ......................................................................... 27
Important safety instructions
RS 2000 |3
Important safety instructions
왘Read this instruction manual carefully and completely before
using the product.
왘Always include this instruction manual when passing the prod-
uct on to third parties.
왘Do not use an obviously defective product.
왘Only use the product in environments where wireless 2.4 GHz
transmission is permitted.
Preventing damage to health and accidents
왘These headphones allow you to set higher volumes than conven-
tional headphones. Protect your hearing from high volume lev-
els.
Permanent hearing damage may occur when headphones are
used at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good and provide clear speech
intelligibility at low and medium volume levels.
왘To prevent hearing damage, set the volume to a low level before
passing the product on to third parties.
왘Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
왘Always keep the headphones/MCA 800 charging adapter at
least 3.94" (10 cm) from cardiac pacemakers or implanted
defibrillators. The headphones/MCA 800 charging adapter con-
tain/s magnets that generate a magnetic field which could cause
interference with cardiac pacemakers and implanted defibrilla-
tors.
왘Do not use the product near water. To reduce the risk of fire or
electric shock, do not expose the product to rain or moisture.
왘Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents and choking hazards.
왘Only use the power supply units supplied by Sennheiser.
Preventing damage to the product and malfunctions
왘Always keep the product dry and do not expose it to extreme
temperatures to avoid corrosion or deformation. The normal
operating temperature is from 5 to 40 °C/41 to 104 °F.
왘Use the product with care and store it in a clean, dust-free envi-
ronment.
왘Switch off the product after use to conserve battery power.
왘Unplug the power supply unit from the wall socket
– to completely disconnect the product from the power source,
– during lightning storms or
– when not using the product for long periods of time.
Important safety instructions
4|RS 2000
왘Always ensure that the power supply unit is
– in a safe operating condition and easily accessible,
– properly plugged into the wall socket,
– only operated within the permissible temperature range,
– not exposed to direct sunlight for longer periods of time in
order to prevent heat accumulation.
왘Varnish or furniture polish may degrade the feet of the transmit-
ter, which could stain your furniture. You should therefore place
the transmitter on a non-slip pad to avoid potential staining of
furniture.
왘Do not operate the product near heat sources.
왘Clean the product only with a soft, dry cloth.
왘Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
Safety instructions for lithium polymer
rechargeable batteries
WARNING
If abused or misused, the standard/rechargeable batteries may
leak. In extreme cases, they may even present a risk of
•explosion,
• fire development,
•heatgeneration,
• smoke or gas development.
Switch rechargeable battery-powered products off after
use.
Do not charge a product with a built-in rechargeable
battery if the product is obviously defective.
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Only charge rechargeable batteries at ambient
temperatures between 5 to 40 °C/41 to 104 °F.
When not using rechargeable batteries for extended
periods of time, charge them regularly (about every three
months).
Do not heat above 70 °C/158 °F, e.g. do not expose to
sunlight or throw into a fire.
Dispose of batteries/rechargeable batteries at special
collection points or return them to your specialist dealer.
Important safety instructions
RS 2000 |5
Intended use/Liability
This wireless TV headphone system is suitable for use with TV sets,
hi-fi systems, and home cinema systems and can be connected to an
analog audio source.
This product is intended for private domestic use only. It is not suit-
able for commercial use. This product is also not intended to be used
with portable audio devices.
It is considered improper use when the product is used for any appli-
cation not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from abuse
or misuse of this product and its attachments/accessories.
Before putting into operation, please observe the respective coun-
try-specific regulations.
Package contents
6|RS 2000
Package contents
RR 2000 stethoset receiver with
built-in rechargeable battery
TR 2000 transmitter with charging station
NT 5-10AW power supply unit with
multi-country adapters (EU, UK, US, AU)
Stereo audio cable with 3.5 mm jack plugs, 1.5 m
Safety guide
Quick guide
The instruction manual can be downloaded as a
PDF file at www.sennheiser.com/download.
A list of accessories can be found on the RS 2000 product page
at www.sennheiser.com. For information on suppliers, contact
your Sennheiser partner. To find a Sennheiser partner in your
country, search at www.sennheiser.com.
Safety Guide
Quick Guide
Instruction
Manual
Product overview
RS 2000 |7
Product overview
Overview of the RR 2000 stethoset receiver
1Ear pads, replaceable
2Ear bows with on/off function
3Volume buttons
+and –
4
Receiver status
LED
(see below)
5
Balance
buttons for the right
and left ear
6Rmarking for the right ear
and Lmarking for the left ear
7Built-in rechargeable battery
8Charging contacts
Receiver status
LED The stethoset receiver ...
... is switched off.
... is connected to the transmitter.
... is connected to the transmitter, the
rechargeable battery is almost empty.
... is not connected to the transmitter or
cannot connect to the transmitter.
... is not connected to the transmitter or
cannot connect to the transmitter, the
rechargeable battery is almost empty.
2
6
1
3
7
8
4
5
5
On
Off
1s1s
1s1s
Product overview
8|RS 2000
Overview of the TR 2000 transmitter
1
Battery
LED
(see page14)
2
Transmitter status
LED
(see below)
3Charging contacts for
stethoset receiver with
holding magnets
4Charging compartment for
stethoset receiver
5DC 5V 1A socket for the power
supply unit, marked yellow
6Analog 3.5 mm In analog
audio input (3.5 mm jack
socket), marked blue
Transmitter status
LED The transmitter...
... is in standby mode.
... and the stethoset receiver are
connected.
4
3
2
1
6
5
1A
Putting the RS 2000 into operation
RS 2000 |9
Putting the RS 2000 into operation
Setting up the transmitter
왘Choose a suitable place near your sound source.
왘Separate the transmitter from other wireless devices in the room
by at least 50 cm/20" to avoid interference.
왘Do not place the transmitter close to metal objects such as shelf
bars, reinforced concrete walls, etc. as this can decrease the
transmitter’s range.
Putting the RS 2000 into operation
10 | RS 2000
Connecting the transmitter to an audio source
You can connect the transmitter to an analog audio source (e.g. a TV
or a stereo hi-fi system).
왘Switch your audio sources off before connecting the transmitter.
왘Check the connection possibilities of your audio source (audio
output, usually marked “OUT”).
왘Select the corresponding connection cable and, if necessary, a
suitable adapter
왘To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the follow-
ing chapters). Follow the color codings on the transmitter and on
the cables.
You can also refer to the beginner’s video guides on how to
connect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos.
Connection possibilities of
the audio source
Color coding
on the
transmitter
Connection cable Page
3.5 mm jack
socket (analog) Stereo audio cable 11
RCA (analog)
Stereo audio cable with RCA adapter
(3.5 mm jack socket to 2 RCA plugs;
optional accessory)
12
SCART (analog)
Stereo audio cable with SCART
adapter (3.5 mm jack socket to
SCART connector; optional
accessory)
12
A
B
C
Accessories and adapters are available from your local Senn-
heiser partner.
Andere Handbücher für RS 2000
1
Inhaltsverzeichnis
Andere Sennheiser Kopfhörer Handbücher
Sennheiser
Sennheiser HD HD 218i Bedienungsanleitung
Sennheiser
Sennheiser RS 140 Bedienungsanleitung
Sennheiser
Sennheiser HDI 91 PI Bedienungsanleitung
Sennheiser
Sennheiser CX 6.00BT Bedienungsanleitung
Sennheiser
Sennheiser HMDC 26 Abmessungen
Sennheiser
Sennheiser HDI 234 Bedienungsanleitung
Sennheiser
Sennheiser SCBT7 Installations- und Betriebsanleitung
Sennheiser
Sennheiser HD 25 Bedienungsanleitung
Sennheiser
Sennheiser TV Clear TVCE1-EB Bedienungsanleitung
Sennheiser
Sennheiser HD 300 PRO Bedienungsanleitung
Sennheiser
Sennheiser HDA 300 Bedienungsanleitung
Sennheiser
Sennheiser HME 95 - 05-10 Bedienungsanleitung
Sennheiser
Sennheiser MM MM 50 Nokia Bedienungsanleitung
Sennheiser
Sennheiser MX 450 Bedienungsanleitung
Sennheiser
Sennheiser HD 26 Pro Bedienungsanleitung
Sennheiser
Sennheiser Momentum True Wireless Bedienungsanleitung
Sennheiser
Sennheiser 9917 Bedienungsanleitung
Sennheiser
Sennheiser HD 515 Gebrauchs- und Pflegehandbuch
Sennheiser
Sennheiser IE 900 Bedienungsanleitung
Sennheiser
Sennheiser MM 550 Travel Bedienungsanleitung
