Sennheiser DW Pro 1 Bedienungsanleitung

SL Headmic 1

Instruction manual

Safety instructions

• Please read this instruction manual carefully and completely

before using the product.

• Make this instruction manual easily accessible to all users at all

times.

• Always include this instruction manual when passing the prod-

uct on to third parties.

• Liquid entering the housing of the product can cause a short-cir-

cuit and damage the electronics. Keep all liquids away from the

product.

• Do not expose the product to extreme temperatures.

• Use the product with care and store it in a clean, dust-free envi-

ronment.

• Only use attachments, accessories or spare parts specified by

Sennheiser.

Intended use

Intended use includes:

• having read these instructions, especially the chapter “Safety

instructions”,

• using the product within the operating conditions and limita-

tions described in this instruction manual.

• never opening the product. If products are opened by customers

in breach of this instruction, the warranty becomes null and

void.

“Improper use” means using the product other than as described

in these instructions, or under operating conditions which differ

from those described herein.

SL Headmic 1

The SL Headmic 1 is a high-quality omni-directional condenser

headset microphone designed for professional “hands free” appli-

cations. Its adjustable neckband is visually unobtrusive and very

comfortable to wear. The SL Headmic 1 is available in black and

beige.

Features

• Individually adjustable to all head sizes

• Thin microphone boom, interchangeable

• Microphone boom can be attached to the left or right side

• Microphone boom is adjustable in length

• Modular overall system, i.e. all system components are easily

interchangeable

Package contents

•1SLHeadmic1

• 1 connection cable

• 1 MZC 2 frequency response cap

• 1 SL MZW 1 windshield

• 1 soft case

• 1 instruction manual

Putting into operation

To connect the cable to the headset microphone:

왘Plug the connector into the socket.

왘Slide the silicone tube onto the

connector.

The microphone can be worn on the left or right side of the mouth.

If you do not want to change sides, continue on page 7.

Changing the microphone position (left/right)

The neckband has a total of five clips which are

designed so that the microphone boom can be

worn on either side of the mouth.

NOTICE Damage to the microphone boom

The microphone boom can break or be impaired in

its function when you bend or turn it. Also avoid fre-

quent alternate bendings close to the microphone

head as this can also damage the microphone boom

and possibly reduce the adjustability of the micro-

phone.

왘Only adjust the microphone boom as described in

this chapter.

Putting into operation

To remove the microphone boom:

왘First remove the microphone

boom from the two clips and

.

왘By turning the microphone

boom, remove it from the third

clip .

To reattach the microphone boom:

왘First attach the end of the

microphone boom where the

microphone head is fitted to

the clip on the desired side

of the neckband.

왘Press the microphone boom

into the two clips  and .









90°







Putting into operation

Adjusting the microphone boom and the neckband

For best possible comfort and optimum fit of the headset micro-

phone, the neckband and the microphone boom have to be

adjusted to properly fit your head.

Positioning the microphone towards the corner of the mouth

To individually position the microphone:

왘Push the microphone boom in

backwards or forwards in the clips

so that the microphone is posi-

tioned 2 to 3 cm from the corner

of the mouth. The further away

the microphone is from the

mouth, the less treble is picked

up.

Adjusting the neckband

The neckband is adjustable in width

and ensures an optimum fit.

왘Change the length of the neck-

band by moving the ear hooks

until a snug but comfortable fit is

achieved.

NOTICE Damage to the microphone boom

The microphone boom can break or be impaired in

its function when you bend or turn it.

2–3 cm



Putting into operation

Using the frequency response caps

The MZC 2 frequency response cap allows you

to adjust the microphone’s sensitivity in the pres-

ence area. The MZC 2 gives a treble boost of 4 dB

(see “Frequency response curve” on page 15).

Use this cap if the microphone cannot be posi-

tioned close to the mouth, if the sound is too muf-

fled or if you want to increase the speech intelli-

gibility.

왘Slip the MZC 2 frequency response cap onto

the microphone until it locks into place with an

audible click.

An additional frequency response cap (MZC 1) is

available as accessory. The MZC 1 ensures a treble

boost of 2 dB.

왘Slip the MZC 1 frequency response cap onto

the microphone until it locks into place with an

audible click.



Putting into operation

Using the windshield

The SL MZW 1 windshield attenuates annoy-

ing wind noise by 10 dB.

왘Slip the SL MZW 1 windshield onto the

MZC 2 frequency response cap .

Attaching the connection cable to clothing

The MZQ 02 cable clip is available as accessory.

왘Press the tube of the connection cable into the

cable grip of the MZQ 02 cable clip.

왘Attach the cable clip to the rear of your collar.

왘Run the connection cable under your clothing.





Putting into operation

Connection cable with 3.5 mm jack plug

The cable is suitable for use with Sennheiser bodypack transmit-

ters with 3.5 mm jack socket. For wired applications, the headset

microphone can be used with the intelligent MZA 900 P phantom

power adapter.

왘Lock the jack plug for safe operation.

Andere Handbücher für DW Pro 1

Inhaltsverzeichnis

Andere Sennheiser Mikrofon Handbücher

Sennheiser

Sennheiser MD 516 FE Bedienungsanleitung

Sennheiser

Sennheiser K6 Bedienungsanleitung

Sennheiser

Sennheiser MKE Essential Omni Bedienungsanleitung

Sennheiser

Sennheiser MD 435 Bedienungsanleitung

Sennheiser

Sennheiser MKE 600 Bedienungsanleitung

Sennheiser

Sennheiser MKH 60 Abmessungen

Sennheiser

Sennheiser MD 41 Bedienungsanleitung

Sennheiser

Sennheiser Evolution e 912 Bedienungs- und Wartungshandbuch

Sennheiser

Sennheiser ME 2 Bedienungsanleitung

Sennheiser

Sennheiser HS 2 Abmessungen

Sennheiser

Sennheiser COM 1420 Bedienungsanleitung

Sennheiser

Sennheiser K 30 AV Bedienungsanleitung

Sennheiser

Sennheiser BF 527 Bedienungsanleitung

Sennheiser

Sennheiser E 602-II - 03-06 Bedienungsanleitung

Sennheiser

Sennheiser Evolution E 906 Bedienungsanleitung

Sennheiser

Sennheiser ME 35 Abmessungen

Sennheiser

Sennheiser 518 Bedienungsanleitung

Sennheiser

Sennheiser evolution e 912 WH Bedienungsanleitung

Sennheiser

Sennheiser e 609 silver Bedienungsanleitung

Sennheiser

Sennheiser MZC 30 Bedienungsanleitung

Sennheiser

Sennheiser MKE 44-P Bedienungsanleitung

Sennheiser

Sennheiser e 609 silver Bedienungsanleitung

Sennheiser

Sennheiser MKH 106 P 48 Bedienungsanleitung

Sennheiser

Sennheiser MD 409 N Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung