Sensorsoft ETHERPAK-4A Bedienungsanleitung
Copyright © 2004 Sensorsoft Corporation, All rights reserved. Sensorsoft and Alert are trademarks of Sensorsoft Corporation.
Printed July 30, 2004 P/N 071-0099 1
Sensorsoftâ
Installing the Sensorsoft Environmental
Monitoring Package
(ETHERPAK-4A)
Package Contents
You should have received the following in this package. Please check your packing list for actual
quantities:
P/N Description
SSA7008 Sensorsoft Alert, 8 Port Environmental Monitoring Appliance
PA6105 Universal AC-DC power adapter, 100-240 VAC, 5 VDC, 1.0 Amp
One of: 132-0011 Power cord for US, Canada, Mexico, Japan
132-0012 Power cord for Continental Europe, Scandinavia
132-0013 Power cord for Australia & New Zealand
132-0014 Power cord for United Kingdom & Ireland
SS6610J Sensorsoft Humidity Temperature Meter
SM6201CP Sensorsoft Flooding Sensor
SP6400J Sensorsoft Power Sensor
C2006 Cable, 20 ft, RJ-45 to RJ-45, Ethernet patch
C2013 Cable, 7 ft, RJ45 to RJ45, dark blue, straight through
C2016 Cable, 20 ft, RJ45 to RJ45, SSD to Alert (2)
C2018 Cable, 6 ft, DB25M to RJ-45, gray flat, Modem to Alert
C4003 Adapter, RJ-45 to DB-9F, console
C4004 Adapter, RJ-45 to DB-25F
F1000 Velcro fastener
F1001 Velcro fastener, water resistant
071-0080 Sensorsoft Humidity Temperature Meter User Manual
071-0012 Sensorsoft Flooding Sensor User Manual
071-0033 Sensorsoft Power Sensor User Manual
071-0094 Manual Notice: Correctly connecting C2016 cable
071-0074 Installing the F1001 Velcro Fastener
071-0084 Sensorsoft Alert User Manual
071-0099 Installing the Sensorsoft Environmental Monitoring Package (ETHERPAK-4A)
One of: PA6109 AC-DC Power Adapter for North America, 9VDC, 0.5 Amp
PA6110 AC-DC Power Adapter for North America and Japan, 9VDC, 1.5 Amp
PA6112 AC-DC Power Adapter for Europe, 9VDC, 1.5 Amp
PA6114 AC-DC Power Adapter for UK, 9VDC, 1.5 Amp
PA6116 AC-DC Power Adapter for Australia, 9VDC, 1.5 Amp
Copyright © 2004 Sensorsoft Corporation, All rights reserved. Sensorsoft and Alert are trademarks of Sensorsoft Corporation.
Printed July 30, 2004 P/N 071-0099 2
Installation
1. Connect to the serial console of the Alert unit by following the instructions in the Alert User
Manual, under section “Connecting to the Alert Serial Console->Model SSA7004 and SSA7008”
on page 14.
2. Configure the IP setting of the Alert unit by following the instructions in the Alert User Manual,
under section “Configuring IP Settings of the Alert Unit” on page 14.
3. Connect your Sensorsoft device(s) to the Alert unit by following the instructions in the Alert User
Manual, under section “Connecting Sensorsoft Devices to the Alert Unit->Model SSA7004 and
SSA7008” on page 16. Please also refer to the manual notice 071-0094 to correctly use the
C2016 cables. More details on locating and using each of the Sensorsoft devices are covered in
the User Manuals (071-0080, 071-0012, 071-0033).
4. Login to the Alert web interface by following the instructions in the Alert User Manual, under
section “Logging into Alert Web Interface” on page 17. You now should be able to view the
Sensorsoft device readings from the Alert web interface.
Inhaltsverzeichnis
Andere Sensorsoft Messgerät Handbücher
